Putting Nearly 2000Hp Into The Back of an Mr2!

[@LamGK]

I remember the day that the original engine in the MR2 chucked a rod on the side of the highway. To see it come this far is truly astonishing. So excited to see this thing make a clean pass.

[@danielclark7397]

Amen

[@Rev.Match.Reviews]

Only time I've ever seen the car in person was the last time it kicked the rod out the block in Indy doing a burnout in the waterbox 😂 you could see straight through the block looking underneath the oil filter 😅

[@Sleepy_spartan717]

I started watching not long before it spit that rod out. Makes me miss my 91 turbo t-top. It was almost identical to this. White on black, manual transmission and all. Just no k20

[@LeviSlone-pf3zu]

“Ope i think she just let go boys” walking down the high way picking up chunks the memory’s man

[@tristanoliva]

Wyatt deserves so much credit. Y’all wouldn’t be at the level of professionalism you’ve achieved without him!

[@timmehnz]

agree 100%

[@Mac-td7lt]

Yep. Wyatt is the equivalent of James from Cleetus's chan. Peanut butter and jelly.

[@sjv6598]

@@Mac-td7lt personally I think Wyatt is better than James 🙂

[@freedomfox8183]

​@@sjv6598that's because you don't know what you're talking about😂..

[@riderzinc]

@@freedomfox8183Wyatt is more skilled than James, Just facts

[@mdjaxfl]

Can we just appreciate how far this channel has gone. Multiple nsx's chillin in the background. The coolest tesla on the internet. In depth dumbed down explanation of the process and why. Top quality components. Specialty shops workin late to help out. Fully functioning shop at the house. Solid b roll glam shots done right. All why remaining humble and relatable. You guys are Killin it

[@Choppa_Ya]

Great synopsis this channel has come so far from charlie in sandals doing burnouts against a boulder in colorado

[@miguelsalas672]

Wyatt is so awesome, I am so glad he is a part of the team. Keep doing what you doing boiz!

[@pudermcgavin4462]

I envy Wyatt, the fact he can build such clean harnesses is amazing!

[@jeffjamison8614]

my adhd would never let me do a wiring harness like that. Totally respect Wyatt's skill and focus

[@geracastellon1384]

On top of the brain needed to do wiring, man's is clean as heck with it

[@Domestic_Tedster]

Honestly ain’t that hard, just a lot of reading and patience

[@notyouraveragegoldenpotato]

If you understand the engine, it isn't hard. It IS time consuming to get it perfect. Close enough is easy but perfect takes time and alot of test fitting. There's some cool products that let you whip together a "milspec" rated harness. Aka.. just a pretty solid one lol. Done a bunch of old air-cooled porsche builds swapping to efi and standalone. It takes time and you have to know exactly what those wires are for to make it work seamless and properly

[@cmwright0]

Legend

[@adamsankey8702]

Wyatt is such a valuable member to the team. He Deadset is killing it in everything he does 🙌🏼

[@RubbishFPS]

Credit to JBR for being there at 11pm to get racers squared away. Could never do this stuff without people like that behind you.

[@Just_In_credible6]

JBR is awesome. Thank you to everyone there if you see this.

[@richardfarmer6570]

Great progress update, I still can't get over how beautiful that billet block is. Shout out to Wyatt for all the tedious work to make a custom harness, he nailed it. Trailer updates are great and you found an actual use for a Smart Car. Cannot wait to see the MR2 back at the 1/4 mile.

[@Jizden_Mipanz]

Can I just say.... It's amazing to see how far you guys have come! From slapping shit boxes together to absolutely beautiful fabrications and the wiring game has exploded! Congratulations Boiz!

[@ronjones-6977]

Still need to work on the "waiting till the last minute" thing.

[@Jizden_Mipanz]

@@ronjones-6977 as does every channel and/or car building show ever made... lol. It's part of the business.

[@YonduBruh]

My thoughts exactly, scrolled down to comment the same thing. KEEP IT UP @BoostedBoiz been a sub since you took your mom for a spin in the civic. Just remember that all the people that haven't subbed are yet to see the amount of effort you have put in and the goals that have been achieved. I show all my friends and work mates this build especially that wheelie was next level! Mad respect from Aussieland

[@ATXAG]

@@ronjones-6977 1000% lol all these youtubers can't seem to complete a build until the final hour, much less any proper testing. This is their career lol

[@MrBrutalMachinee]

@@ATXAG Even professionl racers don't have their cars 100% ready when they go to track, they sit down in them and cars are in process of getting parts and thing checked out, bolts checked and so on. SO this "can't finish builds until final hour" is just nonsense. There's always things that cut off some time, orders not arriving as should have, life that they have around their job. Grow the fuck up childminded ball of sadness.

[@aaronsavage1234]

That bar is red. That’s great! Bright and everything. Oh Some people are color blind. It would look grey to them. Maybe a reflective tape wrapped in a spiral too.

[@matthewsmyk9091]

Loving the fact that the block was built around the corner from my home. South Australia baby!!!

[@wrldgaming9818]

It's crazy watching you go from Amazon parts to fully built billet engine. Keep up the amazing work guys

[@ckfpv]

Not fully billet ,the heads aren't billet but these new heads they have there's no need

[@sjv6598]

@@ckfpv he said fully built billet, not fully billet my guy 🙂

[@TexasBUM]

So proud of y'all. Y'all deserve all the success. The hard work has/is paying off.

[@scottmcelhiney323]

That original modified valve cover looks absolutely awesome with the wrinkle paint against the billet. Great choice.

[@printordye]

Have custom made fabric bags made or buy them bags for your jacks and any tools that will wear into and mar up the floor or walls of your interior. I bought a bag of used UHual blankets and patterned them out and had them sown into bags and covers to prevent scratches and rub marks. Helps with resale value and keeps things fresh.

[@jaymikesell1264]

Dude watching this build is great. I went back and watched some of the first videos of when the MR2 Became a real contender. The progress between then and now is nuts

[@SpeedyRoy63]

The new engine is a work of art and the old valve cover turned out great. Black and chrome look amazing together!

[@nateu5464]

I have been watching you guys since you were working out of your home garage in Colorado and I have to say that you have all come a long way. Wyatt has too, the craftsmanship is top notch!

[@ThomasNygard-bk1pn]

Just shortened my rods in my st, few weeks back! It was inevitable. Watching you has put it in perspective. Work hard and it will be back. It will be time consuming but worth the wait. Keep it in a straight line and be safe. 4-500 hp more is no joke. Especially when you are running 7s on such a short wheel base.

[@marcmalek5956]

As a Raiders fan I approve of the look of the engine. Can’t go wrong with silver and black. Classic look.

[@JrVtec]

Axles about to be sent back to R&D with all that torque! Let's go!!!

[@cpftank09]

Fantastic work and dedication guys! Can’t wait to see all of that work show on the track!

[@Mdudeman13]

Excited to see how it goes. Gonna need stronger motor mounts.

[@joshuasalvage4717]

I've been here since the beginning and I just can't say it enough of how proud I am of you guys and the goals yall have reached. Wyatt and Kyle are one he'll of a pair and I hope it's a long relationship. We enjoy you guys working together!!

[@codysooill]

Crazy to see the progress back to the Colorado days to what you’re at now. Inspiring!!

[@autarko]

Your work ethic and focus is inspiring. Grrat video!

[@kotyswanson4126]

Absolutely love the Timelapse videos of you guys working on your rides! It shows us how much you guys put into all of these cars and what it takes to be at your level. Lol plus we learn stuff. Keep it coming.

[@RaymondFrazee]

I wasn't an import guy, until I started watching your channel. I'm a fan . That K 20 platform is very impressive! Love the content, keep up the great work.

[@letsgoenduro]

You impress me that you can do all this race prep and STILL find time to shoot and edit video! It is a lot of work and makes something that is already nearly impossible just that much harder. Well done boyz... well done. Good luck

[@tdlaustralia7791]

Nice trailer set-up. All those extra bits, like a/c just makes life more fun at the track.

[@djwilliams4714]

Awesome job guys!! Wyatt nailing the wiring!!

[@miiiikee_]

the fluidampr is great man, I run one on my built VW EA888 and it smoothes it out a ton

[@2LegitTooQuit]

You boys are freaking rolling on these projects/builds and I’m here for it!!! Keep up the badass work! 🫡💪👍

[@Randybobandyandy]

Full race car !!!. Amazing how far this car and Chanel have come. You definitely deserve this Kyle. 🤘

[@craighendrix9719]

Can we all take a moment to thank wyatt on making Kyle channel more about actually competing in racing definitely changed EVERYTHING!!!

[@duckedup]

I've missed the MR2 content and you brought it back in a big way! huge milestone for you and the MR2, congrats and looking forward to seeing new records! 😎

[@mksaeg]

Wyatt is the man!!! He put in a lot of hard work!

[@Adam-nv9zo]

It's been fun watching the progress of this car from the beginning until now. Great job, guys. 👏 👏 👏

[@JKHYT]

Man, I gotta say it just makes me happy to see yall leveling up like this. Massive props, this shit takes a ton of work and we just see a 20 min vid. No matter how things go at WC yall should be super proud.

[@ArthurSperotto]

Man I'm so excited for you. You're clearly going all in for this event and it shows! Good choice on the Fluidampr.

[@BadHorsie2]

Put a piece of pipe in between the tabs of the parachute mount before you run the bolt through it to mount the push mount. It will keep you from tweaking or collapsing the tabs.

[@y2kc0wb0y]

You have my full respect for the amount of work, focus and stress it takes to pull a build like this together in such a short amount of time. Looking forward to seeing the team at WCF.

[@blakep7388]

So glad you went into detail about the dampers. I had no idea but now I’ve changed my mind on which one to buy

[@turbo3sgte770]

Did Wyatt is a beast such a good add-on to the channel absolutely love the vibes you guys you guys are amazing

[@langeblauwe]

Twin scroll manifolds need 2 wastegates. One for each set of runners . Otherwise the exhaust gasses are still able to interfere with one another since the runners are interconnected at the wategate

[@Patricks_Projects]

Or split the sides all the way to contact the valve in the gate.

[@langeblauwe]

Yes, good answer. I was thinking the same thing. Some Holset turbo’s have that separation cast in the turbine housing . But adding such a wall to that manifold will take a bit of time.. time they dont have right now

[@jimibill6854]

Putting In that Work!! Keep it up guys.. That thing is gunna fly.

[@natejames5720]

I am so happy for you two! I hope you guys know you deserve the best of the best! It's one of the most beautiful engines I think I have ever seen. Drive and race safe boys and I hope you hit 200mph!!

[@bobrossdahoss]

That billet block is sick. I had the opportunity to buy a 4G63 version and didn't, but looking at this one makes me wish I had. Keep up the good work Kyle and Wyatt.

[@Garage533Ohio]

You guys have officially peaked 😅 I'm just sitting here watching that motor go together and thinking to myself like that's it if money wasn't an option I'd put that same package together. Big turbo, billet everything, e gate, big dogg intake manifold, sequential, fluid damper. The list goes on but man doesn't get much better 👌👌👌 I really hope you guys kill it at the races

[@ronjones-6977]

I was just wondering how much that engine/tranny/clutch/turbo combo actually costs. Here's hoping they get every damn penny out of that thing. It's gorgeous!

[@Huda88754]

@@ronjones-6977budget for 100k

[@Rev.Match.Reviews]

​@ronjones-6977 i wouldnt be surprised if the billet block, built cast head, PPG gearbox, turbo and ecu ran $40-50k all said and done.

[@garyhowe88]

​@@Rev.Match.Reviewsquaife gearbox.

[@Rev.Match.Reviews]

@@garyhowe88 oof on my part, I've been watching that dude Devins AWD 10th gen Type R build and I swear all I can hear is PPG when I think of gears and boxes nowadays

[@Backupnow-gf7wb]

Lets goooooo 🔥🔥🔥🔥🔥, after this you can get some sleep 😊, love the content ❤️❤️

[@Jroberts273]

Love your videos man!!! Been a subscriber for 5 years!

[@eugene-knows-stuff]

HUGE kudos to Whyatt! He is doing THE most important and arguably tedious part of this build! Good job man! 💪💪

[@MercMan115]

My mind is blown that a motor that small can produce this power. Looks so clean and compact. 🔥

[@haydenkeeslar6348]

I love it keep up the good work rest up and I believe in 6 second passes are headed your way be safe have fun when it’s all said and done!

[@Bu5H84]

Damn good work Boiz super proud of you guys MR2 is going to sound so beautiful.

[@TURBOTRISTO]

I have been waiting for this day!!!! love it Kyle come to Australia some day soon for some Honda Collab's

[@jasoncordova2762]

Best of luck on your new journey. Blessed!!!!!!

[@chrishiggins1811]

Wyatt can for sure build a great wiring harness, great work guys. I'm waiting to see right trailers sticker on the cars and the trailer as a sponsorship.

[@ianstephens8533]

Wyatt is so underrated, Johan to LZ is the Wyatt to BoostedBoiz. The man can do it all and just looking at him you’d have no idea

[@DjBud_VinD]

Ohyeah billet block, here we go. Cant wait to see this thing rip. (i always worry you forget threadlock on many of the bolts lol) Big Up!

[@robertsalinas3182]

I am proud of you guys ! I've seen you guys from struggling at the track, now you're going fully prepared even comfort I can't wait to see Brothers good luck

[@shreddmcnasty]

damn that is one pretty engine block , good luck dudes !!!

[@sammyboswelldirtybrc7580]

Dam that new car jewelry is awesome looking bro the boiz is really stepped up the game 🔥🔥🔥😎👍

[@carbon_gc855]

im loving all these comments and really wanna say kyle be safe out there first n foremost also enjoy yourself and go big bro so glad to see how far this channel has come

[@williamevans6043]

That motor is a piece of artwork! Hope it performs as good for you guys!

[@philipgagne1852]

You can see how tired that builder at jbr is ! Thats straight up commitment!!

[@wildwildcity6935]

You came a long way Kyle .. it's fun to see what success of a dream means ... Hope to see when you turbo the smart car with a busa engine

[@jamesmcivor340]

Will be disappointed if this doesn't happen, currently trying to get my friend to stuff one in the back of VW fox

[@macbook802]

I really like the bulkhead wire connection for easy swaps. Hopefully that connection stays reliable

[@BenjySparky]

Kyle and Wyatt y'all rock! Love the channel and content. Peace

[@frankgeimer5952]

Great job Guys! I can't wait to see you tear up the competition with the new setup!

[@ruckusazndude]

I remember the days of drifting in the snow with Charlie and the boys. Now your a Florida man making huge moves. MOOOON TUNE.

[@Atomic21-w1k]

That engine is a beaut’ , can wait to hear it and see it go full send at the track, you guy’s are going to crush it at World Cup , go join the 200mph Club , good luck boiz 👍🏆✌️

[@karld34]

The engine looks good.

[@alanhancock5892]

Boosted boiz gettin fancy! I’m fucking stoked. Looks awesome. Can’t wait to see it rip.

[@Edward135i]

Engine is so dope looking, next upgrade....dry sump

[@WhatIs205]

To think that when you first got the car it threw a rod, and now it's a full blown drag car. I'm happy to see you're making it, keep pushing! 💪

[@Pittsburgh-412]

Wow that engine is so damn good lookin. I think it may have a low 7 possible 6 in it with 2,000hp. And kyle you better upload a video tomorrow 😂

[@jamesmcivor340]

6.98

[@hillbillywes100]

Awesome progress, best of luck in testing and the race!

[@naydenbonchev3957]

Boss man Wyatt looked rough at 12:30 waiting the engine probably had enough of this damn car harnesses and all that but will be well worth it

[@sjv6598]

What an awesome team! Whitt and Kyle in the workshop making that MR2 a dream machine and JBR and all your sponsors coming in clutch with the parts needed. I hope you do awesome at World Cup 💪🏼🤟🏻🙂

[@hmart92]

The amount of knowledge you guys have learned over the years is insane I love watching you guys build cars

[@ToneyDanza]

Awesome video! Been a long time coming. Love the look of the black. You’ve come a long way my dude! Keep it up!

[@Birdhuntingfool]

Wyatt is a wiring genius.

[@GickelsGaming]

The fact that this engine isnt just a thumbnail anymore is an incredible feat. This engine is an absolute M O N S T E R

[@marcapell5621]

Good luck fellas, be proud of your work

[@Jay-sw4mc]

Glad you got Wyatt on your side he’s a beast at his wok 💪🏽 you came a long way Kyle

[@zacknelson1592]

This is so dope. Couldn’t have done any of this without Wyatt.

[@hatchetman6962]

I would really like to see the prelude getting some love like this!! you still need that prelude record too!!!

[@richard-em6zi]

That back pressure sensor is also a good data point for if you run into the problem of bending valves. When on 2-step, you're basically turning the manifold into a combustion chamber. That's what allows the turbo to spool up and build boost when not moving. And I think what was happening before when you had that problem was the back pressure was causing the valves to hang open a bit too long or it was making enough pressure to straight up open the valves when the cam wasn't even pushing on the valves

[@ronnyspanneveld8110]

When it rains to keep us in the shade. right.... :P Loved your face when you put up the push bar.. face wondering "is it going to hit me in the face or not" :P Plastidip that valve cover with RWB..

[@eriklarson9137]

It's so awesome to see you thinking so far ahead. Nice dude!

[@johnnycoleman2601]

Wyatt looks and sounds BEAT! Get that man a nap! You guys are killing it. Can’t wait to see it rip at World Cup.

[@rubinjames3813]

So cool…the come up is real!! Can’t wait to see what numbers it’ll run.

[@gsrjaycee4521]

That setup is just insane never seen a engine so clean 💯

[@JaydenM710]

Hell yeah Kyle keep up the hard work, I remember the first day you got the mr2 it had came a long way, I have been watching since the og days when it was just the hatch in the og house, keep up the grind and hard work I can’t wait to see what else you accomplish 💯

[@Madagon367]

Finishing a hundred things just days before the event. What could possibly go wrong? But seriously that's just how projects can be sometimes. Hope everything goes great. Looking forward to the videos.

[@Lazy_Tim]

Gone with an Australian block I see.😎

[@MartinRodriguez-yr4gf]

I take issue with using an impact on balancer bolt and flywheel bolts. awesome to see you grow!

[@Sinixstar]

Man. Car is looking great. Might need to treat it to a trip to project prime after World Cup. Can’t wait to see it run.

[@bennieleip579]

6:20 kyle thinking there “that would cost me allot off money “ 🤦🏻‍♂️🤣