Fixing a Bird's Nest on the Brother 1055X or PR670e Machine! Sometimes things just happen!!!

[@terrijob7818]

You were right the first time. It is a pain in the ass. I learn so much from your videos. I'm an old grandma trying to learn new tricks.

[@BoricuaSewingCrafts]

Hi Terri! Glad you are enjoying the videos!

[@ozziepaez9846]

Awww... Glad you got it corrected It's like they say... "Follow The Thread"

[@BoricuaSewingCrafts]

Me too!!! I got orders to fill! :-)

[@chrishowell9499]

Thanks for sharing this, so many of us have been right there with you!

[@BoricuaSewingCrafts]

LOL!!!! Chris i was ready to pull my hair out!!!!

[@delightfulreminderswithnic6804]

You saved me! I was going crazy. My machine was not threaded right. I was almost pulling my hair out. You rock!

[@BoricuaSewingCrafts]

Glad this video was helpful! Have fun with your machine!

[@myaddi4874]

Thank you so much. I couldn't figure out why I was getting the birds nest, and because of your tutorial, I was able to fix the issue.

[@BoricuaSewingCrafts]

Fantastic! So glad the video was helpful! Have fun with your machine!

[@imjme444]

Thank you! I searched for this issue on Google, this was the first video that popped up & fixed it perfectly!

[@BoricuaSewingCrafts]

You're welcome! Glad the video helped out!

[@catherine9708]

Super video Jeanette. Thank you for sharing.

[@BoricuaSewingCrafts]

You are so welcome! Glad you enjoyed it!

[@judybower2096]

Wow, it's like your heart sinks when your machine jams up, it's bad enough on a single needle machine, BUT on a Big Multi Needle EEEEKKKkkkk!!!! Thank goodness you got it fixed and figured out and back rolling on!!!!!! Thanks for showing it all in detail, it really helps!!

[@BoricuaSewingCrafts]

Yes Judy. Especially when you are right in the middle of an order. But It was my error. Now I really know the importance of threading the machine correctly.

[@starlakull7441]

I have cleaned my bobbin 3 times this morning. Nothing was working. Thank you for this video. I just had to rethread my upper thread! Waste of a morning, but it is fixed!

[@BoricuaSewingCrafts]

Glad the video helped. I know when these things happen it can be frustrating, but it is a learning experience. Happy Sewing and Embroidering!

[@Lillian.M.]

Wow, so happy you were able to get it cleaned out and corrected, you go girl ! By the way, great video, thank you for sharing

[@BoricuaSewingCrafts]

Thanks Lillian!!! DETERMINATION! I have to keep going and fill these orders!

[@EmbroidPrintNow]

What a coincidence I had the same today 😅 when I was working with polos on one of the machine, I ended unstiching a portion of the design because I lost the registration 😳 but after 1 hours I was back in business, good the you did this video for the people that don't know 😀.

[@BoricuaSewingCrafts]

That is awesome!

[@TrinityWon-j3m]

Pipe cleaners are good for cleaning tight spaces!

[@BoricuaSewingCrafts]

Yes! Also get disposable eye lash brushes. Very cheap and does the job!

[@AngelaBowman-dn9ll]

Hi Jeanette: I have the Ricoma EM 1010. One thing I have learned (the hard way) is setting the timing of the machine. That might be a good tutorial. Setting the timing can be very challenging. Throwing the machine out of proper timing can be triggered by the needle hitting the hoop. Oops. Ugh.

[@BoricuaSewingCrafts]

Hi Angela. Yes. I always do that when I am first starting to embroider an item.

[@lindabrown3326]

😊I had the same issue on needle number one. I checked my threading, done correctly. Changed the needle, jammed again. Changed to another thread and needle, bird nested again! I’m perplexed, don’t know what todo.

[@BoricuaSewingCrafts]

Rethread the entire needle. Sometimes it can be something simple that you are not seeing. Like the thread not being placed properly under the tension sensor.

[@RhaeyaCreations]

OMG, Thank you, I had the EXACT same issue. Geeze, clearing that nest was giving me anxiety on my machine. I got it though. It was very VERY careful.

[@BoricuaSewingCrafts]

YOU DID IT!!! Have fun embroidering and using your machine!

[@RhaeyaCreations]

I absolute am! Thank you for the project saving solve and helpful advice!@@BoricuaSewingCrafts

[@netty3767]

Thanks Jeanette for sharing this, I had anxiety watching this lol…so glad you got it fixed! I’m looking for a multi needle but I’m so intimidated with the threading of all those needles getting the thread in the right way and around the tension knobs…..is there a big learning curve with going from a single to a multi? Are you still happy with your Brothers? Thank you so much again for all of your help and your time in helping us and explaining things so well ❤❤

[@BoricuaSewingCrafts]

Hi Netty. Whatever machine you have you will always run into an issue here and there. Don't be afraid of these machine. In time you learn them and you will be doing amazing things!

[@netty3767]

@@BoricuaSewingCrafts yeah I know I just have to get past the intimidation part….I’m so use to doing a single threading like the back of my hand so it will become that with a multi as well….I know you thread them so quickly so it’s all very possible!! Thank you❤️

[@monicamimiscreations7625]

O like all your cleaning brushes. Mind to share where you purchased them?

[@BoricuaSewingCrafts]

I got these from 5 and Below. You can get them from the dollar store too. They are makeup brushes.

[@lplp8529]

Thank You for sharing this. Where did you get that brush?

[@BoricuaSewingCrafts]

I purchase the brush from the dollar store.

[@julierlee1]

I can’t get the screws out to be able to get to the bobbin housing. How can I move the position bar to get to it? It’s stuck…

[@BoricuaSewingCrafts]

You need to use the screwdriver that came with the machine. Turn it to the Left - Lose the screw.

[@julierlee1]

I saw where you talked about the tool that came with it right after I sent that message. Thank you. Now my problem is that the machine is not cutting the thread. Can you help me with that?

[@jeanetteharrington8591]

Thank you, I made the same mistake, tore it apart and still birds nest! Guess what, yup didn't thread the eye ughhhhh. Saved me a house call from my tech!

[@BoricuaSewingCrafts]

Glad it helped!