Borla Exhaust for 2015-2023 Dodge Challenger SRT 392 [Exhaust System Sounds]

[@gkk2001]

Best Challenger exhaust comparison yet. And with part numbers, even better. It really sealed the deal for me.

[@meowmix1569]

Fake post

[@cemsengul16]

@@meowmix1569 yeah sounds sponsored

[@CrazyAboutVinylRecords]

@@cemsengul16Why should you give a damn?

[@tonymarino1730]

What did you end up getting

[@bailey9r]

@@tonymarino1730 He got 25 bucks for the fake fan post. ;

[@reddsshaker3477]

Borla S-type sounds killer. THAT’S what the Hemi Challenger is SUPPOSED to sound like.

[@goodknight6828]

All 3, even stock sounds godly.

[@bougelaal]

man the ATAK!

[@darknightbegins85]

Sounds like it takes off out of Hell

[@mrnomad55]

I like the S type. sounds just right

[@thegreengamer882]

This is damn good video format, very well laid out for a company.

[@carnage0615]

Look at all them microphones ..this is the best press conference of them all 👀💨💯

[@ACTVRLADR]

The Atak sounds awesome. But borla should make a video of the model #140641 and the #140678.. they are both Ataks, they are both for the 392, but one has the internal exhaust valves and the other one doesn’t...

[@GAMEBANGINGMEDIA]

Man That S stype is fire but I like the Atak too sheesh!! I just go the 2020 50th anniversary dodge challenger scatpack shaker and one of these are going on!!.

[@MyJeffrey1970]

Me too , have a 50th anniversary widebody Challenger and putting 1 of these on too🤔

[@scatpackfever3926]

I liked the S Type better! Had a throatier sound.

[@rtdsbg1]

ScatPackFever 392 I liked the ataks better. The stype sounds muffled.

[@Aboite81]

Agree!

[@cheetoteeto]

S type sounds controlled which i like

[@mustangchris3194]

@@rtdsbg1 I agree but it’s ight with me don’t wanna make girls jump outta dere seat like baybay who dat is 😍lmbo but yea I’m cool with s-type

[@RumpelStiltskindarkone]

@@mustangchris3194 some people get nice cars to impress girls, and some get them because they actually love cars.

[@392_Tish]

You guys are awesome Borla when I get a WK1 SRT8 I’m getting a Borla S exhaust 💯!!

[@g6g401]

Do you have an exhaust option for 2011 Toyota Prius?

[@rtdsbg1]

Boo Ya lol

[@jessyvasquez8431]

Get rid of the car and get something else

[@Hellcat1960]

lol

[@cemsengul16]

Boo Ya epic diss haha

[@sswcubes]

G6G lol!

[@cantcme1243]

I have the Atak with kooks long tube headers on my challenger scat pack and it's a sound that will make a grown man cry every start up!

[@anthonyiadarola1201]

I just bought the same setup your talking about and can’t wait to have it installed .my car is brand new 2023 scatpack challenger t/a under 100 miles on it… I’m on the fence about putting a cam in at the same time since it needs a tune anyways after the Exaust gets put on. Opinions ?

[@lb150t]

I'd go with the Touring Exhaust you can still hear , but on a milder note . That would work for me.

[@lovethesmellofracefuelinth7374]

We considered the atacks as well as corsa extremes for my Challenger, but decided on SLP loudmouth cat-backs instead and are the best bang for the buck. They are a much simpler design and isn't much to them, so that reflects the price are also lighter than the other systems because of it. They basically consist of 3" with open chamber racing bullets, and eliminate the reso's. So they are not overly engineered, but there is a lbit of drone without the resonators. Although it doesn't bother me and can remedy it by just changing up the RPM's a little, and it goes away. They sound killer on its 6.1 and is why I say that they are the best bang, at half the price of the others

[@robinmulder8167]

I went with the Atak on my 2013 SRT8. Love the sound, yeah it's loud, but I don't find it too loud. Great fit (cat-back system) Installed myself on a friend's rack. Only took about an hour and a half. My car is very clean though, no rust etc. Saw some minor defects in the chrome tips but they are tucked under the body so they aren't visible.

[@mohamedaldory7880]

Do you want to sell your exhaust Atak ?

[@virusworld3730]

Any check engine lights?

[@MrJzlavallee]

One thing I would like to hear and Ive seen other people wanting to know too, is the difference in idle volume. I'm really liking the S-types, but worried it'll be just as quiet as stock when not under load. I assume the simulators would give a better chance of increased idle volume, but not sure about it all. I love my scat to death but unless its a cold start, it wont draw much more attention at start up and idle than a minivan a few parking spaces over.

[@Ceecost]

MrJzlavallee cam it 😂

[@vikolafuente8373]

The atak what a savage sound

[@mustangchris3194]

Borja clarity is great

[@coryp_3926]

It’s the S Type for me. It makes my toes curl 💯🦾🦾🦾

[@rblbatb]

That was the best sound comparison video I have ever watched/listened to in my life. Damn.

[@Michael-pk5pp]

Just right! Have ATAK on two Vettes, current 2SS centinneal Camaro; thinking about new Wide Body Scat Pack, of course will add Borla ATAK; because there is nothing like Borla ATAK; is what it is.

[@raymundofelipe4222]

I’ll keep it stock for now my 2019 has a really good exhaust

[@CrazyAboutVinylRecords]

I just bought a 2019 Scat Pack Widebody and think the exhaust is pretty tame. I had a Mustang GT that I put a Borla S-Type on and I loved it. A Borla S-Type or ATAK will be going on my Challenger in the next week or two.

[@youtubechangedmyname]

Stock exhaust on a muscle car sucks dude.

[@frankiefernandez5252]

NOOOOOOOO. !

[@mikeh6564]

@@CrazyAboutVinylRecords what did u end up going with brother? S type or ATAK? Do you like it?? Thanks!

[@CrazyAboutVinylRecords]

@@mikeh6564 Neither. I traded in my Challenger and bought a 2013 C6 Corvette Z06 with only 2,300 miles on it. I put a Corsa Xtreme on it.

[@afrosamurai4465]

Were these tests done in default, Sport and Track mode? Those modes do produce different exhaust sounds.

[@roberthamilton7013]

If you are considering these pass on them. I ordered the Borla ATAK in September of 2021 from my Corvette dealer. They did not arrive until a/4/22. It was so long I decided not install these and had found another product available. Borla with not having even made them yet refused to cancel the order. Grudgingly, I had them installed and low and behold it has an issue that generates a sound like you have a fan belt that is loose. So now I have to order a replacement for 3 to 5 months from now while driving what sounds like a souped up '72 Vega. The candle on top of the icing is that Borla will not pay for the require labor to remove their faulty product and install the new set. They do not have good customer service and will not support you their customer.

[@borla]

Hi, I'm sorry to hear about the long wait for your new exhaust and that it seems to be defective! All Borla Cat-Backs are covered by a Million-Mile manufacturer’s warranty and we would be glad to send you a replacement system. If I may ask, were you working directly with one of our Customer Service team members or your parts distributor for a replacement? We always recommend contacting us directly for issues with our products. Please reach out to our Customer Service Manager for help getting a replacement system and to discuss potential reimbursement. His email address is [e-mail]. Again, I apologize for inconvenience and trouble. We'll get you taken care of. Thank you.

[@armin7851]

I got Borla ATAK on my Challenger SRT 392. Its very mean :)

[@H-DFLSTS]

Bosnian Dragon is it better than the muffler delete Mod? I’m thinking about getting the Atak muffler.

[@themarathoncontinues2289]

It's worth it I got it on my charger srt

[@lmjames33]

@@themarathoncontinues2289 drone and all, huh??? I have Challenger srt 392 as well. Did active exhaust delete, removed resonators and just left stock mufflers. I've had my share of loud exhaust but like to hear motor mite than just loud noise. I'm on Instagram. Take it easy! Meherrinnation_392

[@timothyxanamane7532]

How loud is it really?

[@alaalaloul2181]

thank god i went with the right option s type

[@d9103365]

Love the Borla exhaust, the s type is my favorite...but an exhaust in this price range should have custom tips. that's the only thing stopping me from buying.

[@frankhoffer3504]

Agreed 👍 100%

[@TheNickmacmanus]

ATAK!!!!!

[@timothyxanamane7532]

I’m soo slumped between an s-type and a atak .... like is the atak going to be too loud when I cold start it in the morning, it will wake people up ? Or the s-type would be damn near the same as stock ? .. I don’t want too damn loud but I’m hearing the atak is not stupid loud but people have preferences ..!! someone please help me!!?

[@ElijahGilio]

Best video ever!

[@coupeboy392]

I wish people would do exhaust comparing like this one

[@technogov2]

I've had my Borla Ataks on my Challenger SRT 392 for about 3 years and they sound great except for the vacuum whistle sound the valves every time they open. Kind of a shame because you know it should be there.

[@javierchavez9656]

Put this on to help me fall asleep😪

[@thegreatest8112]

Great video all together

[@lucaszylka9607]

Borla is the king!

[@matthieuduclos7694]

Very good video, good sound comparation

[@frickenbored]

Man that atak is nice

[@perrydimarco67]

do these systems have an active exhaust capability? If not, how do you prevent codes from getting thrown?

[@borla]

Yes, we have systems that include functioning MDS (multi-displacement system) valves and systems that have valve simulators (deletes valves). Please call us at 1-877-462-6752 (Monday-Friday 7:30am-4pm PST) with any questions.

[@mejawmeyaw]

Stock 392 reminds me of 454 Chevy big block

[@darknightbegins85]

An Italian owned company, making cars in Canada, makes most authentic US muscle car

[@Grimr33fer]

I had the atak on mustang gt sounds fucking beautiful

[@bigred22ize]

My neighbors are gonna hate me lol

[@rickeytaylor9174]

FLOWMASTER !

[@masonhall3101]

Does this type of exhaust work for the rt 392 skat pack or are they completely different?

[@aldolizalde481]

They're both the same, they're basically the exact same car, I think on the Borla website it says "scat pack/srt392" something like that

[@WeeklyTravels]

Would this void any factory or aftermarket warranties?

[@christopher87264]

No

[@392swamp5]

Not the headers or the exhaust, but a tune would

[@anthonyquintero1680]

Where to find borla exhaust s for cheap just looked online shiii is expensive

[@CodyTheBmxMan]

How much horsepower do you get in a Borla exhaust system from 485 Horsepower? How much total horsepower will you get? What should I order?

[@19jody72]

Why is there 4 mufflers on the atak system? Would it be loud with just the rear atak mufflers?

[@truthhurts228]

Still waiting for My 2021 Challenger Scat pack Shaker RT to arrive. I really like this system, a question: Are the tips on my 2021 reusable for this system? I called Borla but never got called back? I really want the Atak system with the simulators.

[@borla]

Hello! I’m sorry to hear you didn’t hear back from us. Our Cat-Back system reuses the factory exhaust tips.

[@antoniocail5608]

Do they make a borla exhaust system for the Dodge Challenger Scat pack

[@borla]

Our systems for the 2015+ Dodge Challenger 6.4L will fit both the SRT 392 and Scat Pack. We offer systems with functioning valves for the active exhaust feature and systems with valve simulators. The simulators are there so as to not get a Check Engine Light.

[@team-mh7fb]

0:44 1:17 1:54 2:38

[@angunotv]

Borla Atak is da best

[@frankiefernandez5252]

Were the resonators removed....my 2017 challenger is straight piped but I'm looking for a deeper rumble....any advice?

[@davidhammond10]

Just from all my internet searching I’ve done over the last day, seems like your gonna have to sacrifice loudness for deepness.

[@cidhomerimperialpneulemen2107]

are there versions of these exhaust system for the SXTs? Yknow the 6 cylinder ones. oh, snap, nvm lol, i went to the site and answered my own question. but, the V6 variants are just normal configurations, may as well just stick with the stock. So much hate against the v6 challengers.

[@jonweller51]

Because it's an imposter😂

[@tr3ynag4ta]

It ion sound good and it’s sucky. 🤷🏿‍♂️ Who like the sound of a v6 dodge? Not me 😂

[@justaguy9152]

I have atak on my v6 it sounds pretty good for what it is, I have a vid if you want to listen

[@carsoncrafton6809]

few questions, i hear people asking for active valves does that mean they have theirs where they can open and close them? and which would u prefer, atak or s type, for someone who always wanted loud. ps. i don’t know if the exhaust sounding controlled effect performance since the atak sounds way less controlled then s type

[@borla]

Hello! All Challenger SRT 392 vehicles have the Active Exhaust feature from factory. If you're looking for something aggressive, we would definitely recommend the ATAK. Our exhaust systems do not change the behavior of the Active Exhaust. It uses the stock valve motors/actuators.

[@carsoncrafton6809]

@@borla so when i go to purchase do i purchase the “replacement active exhaust valves” or “active exhaust valve simulators” btw my scat is stock and has no exhaust upgrades so far

[@borla]

It depends on whether or not you wish to retain the Active Exhaust functionality. If you do, you will want the system that includes Active Exhaust valves. Our system with simulators do not have valves, the simulators are there to prevent a CEL due to not having valves. If you let us know which system you want, we can help get you the part number.

[@carsoncrafton6809]

@@borla i want valves to open and close, and i don’t know whether or not i have them since my car is stock. i want the one that will give me open and closing valves and i need to know which option to choose

[@borla]

@@carsoncrafton6809 All 2015+ Challenger SRT 392 cars will have the Active Exhaust feature stock from factory. I've linked the system with active valves below. Link: www.borla.com/products/dodge-challenger-srt-392-cat-back-exhaust-system-140641

[@sofa675]

I like the stock much better sound

[@johnelleriv4952]

i just had my attaks put on this past Saturday and doesnt sound like this they must've had the resonators deleted in this video and didn't put that in the video

[@borla]

Hello! We're sorry to hear you're not happy with our system. The only modification to the cars featured in the video are our Cat-Back systems. These Cat-Back systems bolt-on behind the catalytic converters. There should not be any stock resonators left in the exhaust system once our Cat-Back has been installed. Which part number did you purchase for your 2015+ Challenger 6.4L?

[@JamesMorris-g4p]

That's the one son😅

[@mbk7367]

Nice

[@gabrielomalley6266]

Do any of these exhaust add horsepower?

[@robertehrler475]

They all sound great!! 😎 But $$$ you can do a lot of mods for the dollar!! Just saying

[@lmjames33]

Stock doesn't sound bad at all

[@corvettedude3257]

It's a great sound and the Atak really doesn't sound any better.....or change it much.......it's really all about the VOLUME!! More is, as you might expect, .BETTER!!

[@lmjames33]

@@corvettedude3257 I actually went with the Carven R series mufflers. They sound absolutely amazing!!!!!

[@ChristonHan]

no dronage for all systems?

[@borla]

Hi. Thanks for reaching out! Our systems are drone-free.

[@declaratedvet]

No dronage, but some drainage...

[@jeffcombest6466]

I like the last one I got a ram I'm running super 10's , I want to be able to hear radio and have conversation will the borla be too loud

[@borla]

Our systems do not drone so it's not going to be loud during steady, cruising speeds such as on a highway. You will really only hear our system during startup and acceleration.

[@jeffcombest6466]

@@borla ok

[@therealdirtydan908]

I'm not sure if you guys still answer comments here, but if I were to buy the Atak system for my 2016 Scatpack, would it throw a code from the active exhaust system?

[@borla]

Hi. Thanks for contacting us. We have systems with functioning valves and systems with valve simulators. Neither of the two will throw a CEL. Let us know if you need help finding a part number.

[@therealdirtydan908]

@@borla thank you very much for the prompt response, would atak be the cheaper option out of the two?

[@borla]

@@therealdirtydan908 The system with valve simulators is going to have a lower price point, but since it does not have valves, you will lose the active exhaust function of your vehicle.

[@therealdirtydan908]

@@borla alright, thank you guys for the info, when I finally decide to pull the plug on it and buy one I definitely will be choosing borla!

[@borla]

@@therealdirtydan908 Of course, you're welcome! Thank you for your support!

[@chiragtyagi2020]

do you guys do i20

[@KevinLopez-to1eo]

Will these work with the active exhaust on the 2020 challenger scatpack?

[@borla]

We offer systems with and without functioning valves for the Active Exhaust feature. We can help get you a part number for the valved systems if you'd like. We'll just need to know which sound level you're interested in.

[@KevinLopez-to1eo]

@@borla I'm interested in the atak

[@borla]

The part number you need is 140641, here's the link: www.borla.com/products/challenger_srt_392_scat_pack_catback_exhaust_atak_part__140641.html If you plan to purchase, we recommend ordering from one of our dealers as they will have the better price than ordering direct from our site.

[@crazyfastyfz450]

Any horsepower gains or is it all just noise?

[@borla]

Hi. Typically for a V8 you can expect a gain of about 10-12 horsepower.

[@lmjames33]

🙄

[@corvettedude3257]

@@borla Yeah, I'd have to see dyno numbers to prove that. I really doubt it. It's OK though. It's still a great sound you guys have put together with these systems.

[@Jt_473]

Is the Atak legal in CA?

[@Locallybuiltauto]

Do you guys do jetta?

[@borla]

www.borla.com/vw-jetta-exhaust-systems/

[@アントワーヌゴディーズマン]

1:54 2:38

[@Hemiroc196]

Atak dammm

[@Jass906]

Please please help meeee I have TA392 scat pack (2021) can this atak cat back exhaust fit in my car!!!!

[@borla]

Yes, it does! We have two ATAK systems, one with functioning valves for the Active Exhaust feature and one with valve simulators. If you wish to keep the Active Exhaust feature, you'll need the ATAK with valves (part # 140641). The part number for the ATAK with simulators is 140678.

[@Jass906]

@@borla thanks sooo much man for help me🙏🏻🙏🏻🙏🏻

[@malikkurd1018]

how much does borla atak exhaust cost with installation ?

[@borla]

We offer an ATAK system with and without valves for the active exhaust feature in the 2015-2021 Challenger 6.4L. The system without valves has an MSRP of $1488.99 and the system with functioning valves has an MSRP of $1892.99. We recommend ordering online from one of our dealers as they will be about 10% off of MSRP. Please let us know if you need assistance getting a part number. I'm afraid we don't perform installs so you'll have to check the price with the shops in your area.

[@kaibertolini5319]

Is it legal in austria?

[@tonymarino1730]

So I'm on the fence between the S type and ATAK. Anyone have any input i use my car as a daily.

[@jfresher925]

Get the atak bro i just ordered mines today

[@speeduh-de2pz]

@@jfresher925 how are you liking it

[@jfresher925]

@@speeduh-de2pz bro its definitely worth it my challenger sounds way more aggressive and the cold start sounds amazing and it has no drone

[@nottabidenfan660]

@@jfresher925 does it have a lot of "crackle" like a mid muffler delete?

[@jfresher925]

@@nottabidenfan660 nope honestly it sounds like the stock exhaust but more aggressive

[@johncena4913]

So can I use the atak for my 2020 Charger Scatpack?

[@borla]

These systems are for the Challenger 6.4L, we have different systems for the Charger 6.4L. For the 2020 Dodge Charger 6.4L, you will need part number 140672. That is our ATAK Cat-Back with functioning valves for the Active Exhaust feature.

[@justinmarshlack]

@@borla just bought a 2021 scat charger with the srt tech package. Want the atak, which ones will I need? Can't wait to hear this car runmble!

[@borla]

@@justinmarshlack Both part numbers 140672 and 140675 will work on the 2021 Dodge Charger 6.4L. It depends on whether or not you wish to keep the active exhaust feature on the vehicle. 140672 includes functioning valves that will work like the valves in the stock exhaust system. We recommend 140672 if you would like to keep the active exhaust functionality.

[@ryanurukalo4347]

Is this the Hellcat or 392?

[@redguitarfilms]

SRT 392

[@matthibbs2871]

Can you read?

[@u1richh]

Ryan Urukalo That's the base model V6.

[@2ValveMiri]

@@u1richh lmao

[@MBballer2]

I would get the s type then delete the mufflers

[@danieltorquemadajr5395]

Lol the ATAK sounds the same as a mid muffler delete. 😂😂😂😂

[@hemifire4092]

Daniel Torquemada Jr...I thought the same..

[@D_day1969]

Yea what advantage does the ATAK have over the mid-muffler delete? That I can get for just under 100 bucks..? Sounds almost the same to me as a mid muff delete although the ATAK does sound a little more raspier and meaner at higher RPM and looks like a well made system but not that more different sounding than a delete So does this system add more TQ? And is it worth the price..? For a little more TQ gain over my stock mid delete?

[@davidrosowski6476]

because it is... the atak series is a straight pipe all the way to the axle resonators for the drone delete. its literally, leaving your mopar resonators on, and deleting your midmuffler. with 1800$ pipes.

[@themarathoncontinues2289]

False I had the muffler delete on my charger srt and then got the Borla atak and it sounds wayyyyyy better You can notice the difference and for some reason it rides smoother

[@frankiesaldivar8518]

But without the rattle noise when you do a mid muffler delete eventually your exhaust will start making a real bad rattling noise when Accelerating

[@rayn4188]

Does his helmet say "Durant"?

[@fortycaliber6707]

Ray Norwood No it says "Bondurant" like on the side of the car

[@rayn4188]

Forty Caliber ohhhhh lol ok I see it now. Thanks!

[@krypticbee0816]

They sounds the same honestly just ATAk was loudest but they all sound same

[@XWabbit]

0 videos for the v6 models LOL!!!!!, great way to alienate V6 owners.

[@NakedChicken69]

SillyWabbit they did that themselves by buying muscle cars with mini van motors

[@XWabbit]

Luke V I 4got everyone had $ to buy V8's, my bad

[@vallee5720]

I had a v6.. ended up selling it 2 years in for a 392, trust me if you can do it

[@davidrosowski6476]

because every 3.6 owners knows all you need to do do is delete the mid muff and leave the rear res' and youre set.

[@thermonuclearwarfare]

Dodge should have NEVER put a Pentastar in the Challenger line.

[@gabrielomalley6266]

Atak way too loud and obnoxious

[@soapydrinks3042]

The 21 dislikes are fortnite kids who like lambos

[@218422100]

Imagine any of those with long tube headers and a good tune.....

[@yahboiijoshyyy9482]

when you put this on the challenger can you switch the modes to it like touring, stype, borla attack? or is it just 1 certain sound?

[@borla]

Hi, sorry for the delayed response. The Touring, S-Type, and ATAK are all separate systems.