BOSCH GWS 12V-76 Cordless Mini Angle Grinder Unboxing and test

[@zizilazy]

you should take battery off every time you change blade. Thanks for you vid

[@NikolaosTsarmpopoulos]

It is very dangerous to add/remove/touch the disc while the battery pack is connected. Always remove the battery before touching the discs.

[@Nitrxgen]

ok mother

[@hidad5601]

Only little girls remove the battery when changing the disc. Us men keep it in.

[@johnsalcido5436]

Blah blah blah, keep your advice to yourself

[@akmaldiable7060]

Pfft 10 fingers just too much

[@Bojansakotic]

@@hidad5601 yes we know... And heard so many about US guys....

[@AndrewMaslyanko]

Don't hold the power slide button with your thumb. You should engage the lock mechanism by pressing the tip of the button into the tool as you turn it on, then let your thumb loose, and the lock should hold the button in the on position.

[@MobileGedas]

Oh . thank you!

[@Runemasque]

The angle grinder is perfect for trimming hooves, horse hooves, with a Werkman disk, which looks like a wood carving disc but is specific for hooves. Hoof trimmers who use angle grinders have a hard time finding a tool like this. The more common 4 inch grinders are too big and too noisy and scare the animals. The Hoof Boss is marketed specifically for hooves, but Bosch is the best in my view. Living in the US, I ordered mine from abroad, as they weren't being sold in the US. A touch up trim requires one battery, but more extensive work, like overgrown walls and bad dorsal angles might end up requiring two 2.0 batteries for just one horse. You can even turn the grinder on its side for targeted overgrown bars. The rasp is still handy for a smooth and level finishing touch, and to sight evenness between heels and overall of the walls.

[@labrat7357]

Let the disc do the work and don't force it.

[@alantimmins7343]

Just bought one, when cutting i find starting the cut at the far side of the material and pulling the tool towards you give you more control than pushing away from you.

[@raulstaines8701]

Take off the battery when charging the disc..

[@Runemasque]

How can I use this for grinding down bumps and bulges? I intend to use this for hoof trimming of horses. I need a small tool like this that is quiet to not scare the horses. Larger angle grinders use flap discs, which work well for this purpose. How can I do it with this mini Bosch?

[@MobileGedas]

everything is the same as larger angle grinders. only here the discs are smaller.

[@Runemasque]

@@MobileGedas Do you know how to find a disc for this grinder? It seems to me that the 3 inch discs are all rolloc? I am so puzzled as to how to find a sanding disc that will work on this grinder.

[@MobileGedas]

@@Runemasque www.ebay.co.uk/i/274345229447?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=274345229447&targetid=910259638509&device=c&mktype=pla&googleloc=1006500&poi=&campaignid=10195651178&mkgroupid=107296207892&rlsatarget=pla-910259638509&abcId=1145987&merchantid=113393974&gclid=EAIaIQobChMIvpiClPLN6gIV0WDmCh1NRgWMEAQYBSABEgK4I_D_BwE

[@Runemasque]

@@MobileGedas Thank you for looking that up for me! The ebay link is for grinding, not cutting, right? That could be the best thing! The other link looks maybe not the right size? Thank you so much for taking time to help me!

[@MobileGedas]

@@Runemasque yes,ebay link is for grinding not cutting.only ebay link the right size.You're welcome my friend!

[@driverspy1631]

Disculpa cual es la medida que indican los discos en el orificio interior?

[@MobileGedas]

disc 76 x 10 mm

[@driverspy1631]

​@@MobileGedas muchas gracias

[@MobileGedas]

@@driverspy1631 you welcome ! :)

[@Bojansakotic]

Very good choice bro... I bought these GWS 12v and I'm realy not dissapointed. Top compact at first

[@electrocomm]

I hope you figure out that the switch can be locked, and not keep the finger always pressed on it. nice toy.

[@Serbian_Coyote]

Of course, you can lock the switch easily. Push them up till end and at the end press them down. Done. Best quality, best choice. German Tools.

[@Leelicious1312]

Does it cut well through bike locks? Just out of curiosity...

[@MobileGedas]

simply curious? 😁

[@Leelicious1312]

@@MobileGedas what can I say, I have a thirst for knowledge. So, does it or not?

[@MobileGedas]

@@Leelicious1312 i can't say because i didn't try

[@Bojansakotic]

Hahahahahahahaaaaaaaaa

[@jasonjohnson6216]

It cuts mini storage buildings great. I can cut a small hole and squeeze through it and bargain shop

[@jostertervar9916]

thanks for the review !!

[@MobileGedas]

You're welcome!

[@abhinandankumar4939]

What is price

[@MobileGedas]

113-254 £

[@dandyer8351]

Where is the unit made ? China, Germany or malaysia ?

[@rjsvids]

Hungry

[@Leelicious1312]

Zimbabwe

[@dandyer8351]

Can confirm its germany for uk based stock.

[@robertb.3651]

Afghanistan

[@unboxinqit]

Germany for Malaysia base stock

[@vitthalnikam4917]

Very nice. I want to purchase set of engine. From where i got it. Can you tell me.i am from India.

[@MobileGedas]

unfortunately i am not a seller . i bought it in england

[@successislife1143]

Khase liya

[@MobileGedas]

thanks

[@ВасяГоловейчук]

👍👍👍👍👍👍👍👍👍👍

[@saifihasan0751]

Let me know price

[@MobileGedas]

£104.51

[@sureshnathan3792]

How much price

[@MobileGedas]

Body Only £92.00

[@definitelynotinosuke4418]

L

[@rampalkanwar6235]

Price

[@MobileGedas]

£260.86

[@rampalkanwar6235]

@@MobileGedas kaise order karte bro

[@rampalkanwar6235]

Order kaise kare

[@MobileGedas]

@@rampalkanwar6235 with in england usually .buy and everything

[@rampalkanwar6235]

India price

[@rajkumarpatkar970]

कितने में आएगा कहा मिलेगा

[@MobileGedas]

?

[@qanononabong8491]

Aggravating muzak.

[@alexx070185]

Отличное видео, я тоже снимал на этот прибор несколько своих. Заходите, смотрите, подписывайтесь.

[@MobileGedas]

спасибо дружище ;) неплахои кантент у тебя с обеснениями.толко видео делаи во вес екран и будет сщасте,люди хочеть качество в изображение ;) я немало видел такое видео в россии толко по центру екрана.. у вас ето тренд или как? sorry за громатику,я Литовец ;)

[@victorr-name]

Buenos flores

[@MobileGedas]

😁

[@pietdeboer5008]

I think..no..i know, the Metabo 12 V Powermaxx CC 12 BL is much better I live Bosch Blau, but in this case... i prevere the Metabo. Greetings fromm Germany Piet

[@MobileGedas]

I think that BOSCH GWS 12V is much better :)

[@rjsvids]

@@MobileGedas metabo came with a 2ah battery and bosch came with 1.5ah, that matters , so put a 2 or 4 ah in the bosch and youll see

[@MobileGedas]

@@rjsvids and I use 4 ah battery.

[@siaband]

Next time wear gloves and sunglasses.

[@MobileGedas]

as you say

[@pauluslung8579]

Dimana saya bisa membeli ini barang

[@philbagus9662]

Paulus Lung Di perancis ada🤣

[@carlosbatarritaurkiza4034]

No se debe manipular la mini amoladora con la bateria puesta, ni colocar o quitar disco con ella puesta. FALLO GARRAFAL. Carlos bat

[@MobileGedas]

como tu dices

[@ranjeetrkm470]

Bettry beakup

[@carlopalladino5595]

Parksid💪💪💪💪e🤠🤠🤠🤠

[@rjsvids]

yeah right, my experience, I bought one of those parkside, work 3 times, each time i have to work with it, the tool turn of cause it was very hot when working more than 3 minutes, send it to the store, bought the bosch, couldn be happier, works perfectly, normally more than 10 minutes and it won't turn off. YES parkside seems to be quicker, but life isn't a sprint, is a marathon, and Bosch costs more but you pay what you got, PARKSIDE is complete garbage.

[@dandyer8351]

@@rjsvids The Bosh has brushless motor so last alot longer too. Plus if ur deep into to the bosch 12/18 line its a no brainer to stay with Bosch.

[@umitcihangir1991]

Bosch failed

[@leonk.1031]

Ümit Cihangir Why

[@AndrewMaslyanko]

Don't hold the power slide button with your thumb. You should engage the lock mechanism by pressing the tip of the button into the tool as you turn it on, then let your thumb loose, and the lock should hold the button in the on position.