Bosch Innovations & News 2025 | EBIKE24

[@MarkSnop]

I wish you guys were in the US and close by to me ha ha what a pleasure to have all this information on the video. I really appreciate it. Good job.

[@texfromro]

very good presentation.. straight to the point 👍

[@ebike24]

We really appreciate your compliments. Thank you Luca

[@carlespr]

I'd love to use a 745W battery but I ready things like it goes down from 30% or other % to 1% and cannot be turned on again, is there something that needs to be done when buying a bosch active rack compatible battery to make sure it's usable in its 100% of capacity?

[@DM-dq1mh]

Great videos, very helpful, is your kiox retrofit video available yet? Will it be possible to retrofit a kiox 400 to an intuvia 100 ( smart system) ?

[@ebike24]

Thank you, we appreciate. Retrofit video: kzbin.info/www/bejne/aGXXcoamfreGkMU. It is possible to retrofit a Kiox 300 or 500 to an Intuvia 100. Cheers, Luca

[@JorgeDiazfernandez]

Hello from USA and thanks for the video , Iam really happy about the new purion 400 now my question is how can I install this new purion ?? it just need plug in on the system controller or i have to connect to the motor ,hopefully you make a video how to do it thanks for your video

[@ebike24]

Hello Jorge, actually the www.ebike24.com/bosch-purion-400-control-unit is a plug and play, just connect it to the system controller and to the motor, this video may help you, even though it regards Kiox 300: kzbin.info/www/bejne/rKbWp354atRgpqs Thanks Luca

[@douglasstephan6636]

What happened to the Bosch/TRP wireless rear derailleur?

[@ebike24]

Hello Douglas, it's still up and running we just didn't mention it because it's 2024 novelty, not 2025. Thank you Luca

[@Masemoto]

Is the Purion 400 compatible with the Gen 4 Performance CX motor?

[@ebike24]

Hi and thank you for your comment. This depends on if your CX motor also has the Smart System software. The Purion 400 is only compatible with Smart System motors. If your bike has the LED Remote or System Controller installed, it has the Smart System. You can find more info here: www.bosch-ebike.com/en/help-center/asset-asf-00512 Hope this helps! Cheers - Michael

[@JJ-kv1le]

Hello, thanks for the vídeo first of all! Can you tell me if the purion 400 works without a smart led? I have a Mondraker 2022 and i want to change de led for the Mini Remote.

[@ebike24]

Hi, and thank you for your kind words. For the Purion 400 to function, you will need either the System Controller or the LED Remote. Since the Purion 400 does not have any buttons, one of these two remotes is necessary to control it. You can find more details about the Purion 400 here: www.ebike24.com/bosch-purion-400-retrofit-set I hope this helps! Cheers - Michael

[@JJ-kv1le]

@@ebike24 thanks

[@ebike24]

You're welcome! However, I have to add that you also need the Mini Remote if you want to use the System Controller + Purion 400. If you use the Purion 400 in combination with the LED Remote, you don't need the Mini Remote. Cheers - Michael

[@Fais-v5l]

Orbea wild , santa cruz valla , made the power button on the top tube bigger ,was this deliberately prepared for future displays like DJI

[@ebike24]

Hi, thank you for your question. Well, that's very likely. Have a good weekend, Luca

[@wilko2907]

The fact u can’t upgrade from 750 to 800 is actually pretty crappy from Bosch 750 only come out in. 2022 and already dead end upgrade in 2024 Not so smart system Plus no garmin support Definitely my last Bosch e-bike Learn from your mistakes

[@ebike24]

Hello, unfortunately I have to agree with you, Bosch could make some progress regarding standardization and integration. Thank you Luca