Bosch Disc Brake Installation

[@syenosis]

I've literally never seen a mechanic do a brake job this thoroughly.

[@DoctaDoon]

I do my brake jobs this thoroughly....

[@wenisinvietnam]

This is a really relaxing video. Thanks! Good info!

[@jontoker]

I wish there is mechanic like this exists here. Look how professional this guy works! Here, nobody will spend that much time.

[@easylivingsherpa]

Then you'd complain about his prices.

[@koopasayer5999]

@@easylivingsherpa yes only like $100 an hour hehe

[@araofmadisoncasey4247]

we do

[@deelupriyadarsh4859]

Job done with passion, Great..!

[@jims2507]

Could you explain the brake bedding procedure better? Are these instructions for the semi-metallic as well as the ceramic? 20-0 ten times. How long is a short cooling period for stopping? 40-20 slow down cycles ten times. How hard to slow down? Normal rate of slowing down? How long is a short cooling period for slowing down? I'm looking forward to installing my first pads and rotors, and I bought Bosch semi-metallic pads.

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@BoschAutoNA]

Hi Jim. I apologize for the delayed response. Here is some information on the bedding procedure. Bedding-in Procedure • During the test drive, the vehicle should be driven at a moderate speed (30-35mph) and brakes should be applied gradually (normally) without coming to a complete stop, to initiate the material transfer process. • This process should be repeated for 8-10 times. • Avoid more than a minute between each brake application to maintain the temperatures needed for the bed in process. • Next, increase speed to 50 MPH and strongly brake down to 5 MPH. You don't want to brake strong enough to activate your ABS or lock up the tires. You should be able to come down to 5 MPH within a few seconds • Repeat this process 4-5 times, then drive an additional 1-2 miles while very lightly braking to cool down the brakes. • When handing the vehicle back to the customer, it is essential to advise them to brake gradually (normally) and to continue the bedding in process correctly.

[@dimlu308]

Лучшее видео которое я видел на тему замены тормозных дисков и колодок. Жаль что не на Русском языке.

[@74pakhan]

А зачем тут озвучка? Все ясно и понятно. Особенно полезно на 2:31 частичная замена отработанной торм жидкости. Ну и если так надо русский язык, то можно включить субтитры с переводом. Полностью согласен - это лучшее видео.

[@stephenmaurer7008]

Do you recommend Bosch Blue or Quiet-cast pads?? I drive a 09 Toyota Tacoma 4x4 and put 25-30,000 miles a year on this truck. I also tow a 1300 lb small fishing boat during the summer. Which pads best match OEM??

[@BoschAutoNA]

We recommend QuietCast pads for the front axle, specifically part number BC976. This pad features out latest copper free premium friction material that will provide excellent stopping power while remaining extremely quiet, low dusting, and long life. You can find out more about our friction material at www.boschcopperfree.com/en/. We also offer replacement rear shoes for your vehicle, part number BS871.

[@thanveerthaha9999]

@@BoschAutoNA Hai.. I am from India. I have Toyota innova 2006 model. I am recently changed new bosch break pads and disc rotors. But the pads not good. I think that is not original pads. So please let me know which is the best pads?? (original bosch pad and the code(part) number.I am waiting for your reply. Thanks

[@ismaell615]

Why does the rotor look dull? Does it turn shiny after a use?

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@BoschAutoNA]

The dull appearance referenced is the coating on new rotors. The coating will be removed from the contact area between the pads and rotors. The contact area on the rotor then becomes “shiny” after a few brake applications. The non-contact areas of the rotors will remain with the coating to protect from corrosion.

[@allanr1515]

what does the spreader spring do?

[@joeheskett7225]

So I just installed Bosch QuietCast pads and rotors on my 2004 Corolla. Went for a test drive and oh wow, the noisiest grinding noise I've ever heard after a break job. I'm 100% sure I put everything back together correctly but getting a lot of grinding noise. Is that normal for the QuietCast pads and coated rotor? I did my 10 complete stops from 20 mph to 0 and then 10 slow down cycles from 40 mph to 20 mph. Your thoughts? I'll be pulling the tires and checking everything again. Wow, loud grinding....

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@BoschAutoNA]

Hi Joe. I'm going to have this sent to our technical support group. We would like to look into your issue. Please fill out our form so that we can get you in touch with our product specialists. spr.ly/6055G9WgN

[@johnmiller9219]

what did it wind up being?

[@joeheskett7225]

@@johnmiller9219 Human error. I placed the pads on backwards. The metal pad was gone and rotor scarred pretty bad.

[@joeheskett7225]

@@BoschAutoNA Human error.

[@BillSW]

what is the grease ushipped in the pad box for? he didnt use it

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@BoschAutoNA]

Hi Bill. Thanks for reaching out. Bosch brake pads come with synthetic brake lubricant for use in disc and drum brake systems. This lubricant should be used on metal-to-metal contact points and sliding surfaces to reduce corrosion, noise, and vibration. An example of usage in the video is at the 5:40 mark.

[@BillSW]

@@BoschAutoNA where can you get Bosch brake pads in Ontario Canada? I cannot find stores that carry your pads!

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@BoschAutoNA]

Hi Bill. What is the year, make and model of your vehicle?

[@KarolosAthens]

BENDIX

[@davidderfus3462]

I call Bull#%&t !! !! !! There is NO WAY you are removing bracket bolts with an air ratchet !! !! !!

[@johnremcastro]

For an old rusted card with brakes not being serviced for years maybe. But for a car following the service intervals for brakes, a breaker bar or a long enough wrench will do the job.

[@stevenbryant4718]

Wow, through the magic of editing they skipped the time he went to take a piss. No way I do a complete brake job without taking a leak. Imagine that you maroon, LOL !!

[@chien-shengtsai8626]

@@johnremcastro I couldn't get my caliper bracket bolts off. Will try with longer wrench and breaker bar and using a jack. The impact wrench couldn't get the bolt off and only had access to one of them.

[@THE.DIYGUY]

I AM AS HAPPY AS POSSIBLE for choosing BOSCH Brake Pads. They are impressively durable and offer Superb braking performance! I own a Audi A6 C6 2.0 TDI 170, and after a Performance Software Stage1 Upgrade & FMIC , to 220PS, i decided to get proper brake pad's, preferably from a trustworthy company so i choosed BOSCH. After fitting the Bosch brake pads, very proud with my Stage 1 MOD, i have been driving like a MANIAC for about 5k Kilometers / 3k Miles , and brake pads were still usable , for another at least 3k Moles/5k Kilometers , but decided to change them, and again i choosed BOSCH Brake Pads ! ❤ I i 100% Sure that if i would've drive that car nicely , BOSCH Brake Pads would've last for as long as 45.K Miles or 75 K Kilometers . I am a mechanic and i re-clean & Re-lube the braking pads+sliding rods & caliper every 1 year as i love my car working Perfectly ! Will definitely choose Boche next time as well.

[@BMan100]

one issue I have is with the website itself, it would be nice to be able to buy your products straight from the website. It's hard at least here in Ontario to buy your products, as most of them are available only in the states and cost twice as much as the item itself.

[@hkiceca]

Try Rockauto, the total cost of parts plus shipping is still cheaper than that sold in Ontario stores.

[@MM2009]

Same grease to the guide pins and pad carrier? Spraying brake cleaner and putting grease inside right after? Shit job! Pins need silicone high temp grease neutral with rubber. Pads need ceramic paste that will dry.

[@Integrity.is.everything]

True but would you honestly still say it's a totally shit job?

[@longfade]

Beautiful presentation.

[@aa1yhm]

This video is a dream 😂, a mechanic will not do half of what you did to change the brakes 😂

[@72pupsik]

Nice, But you should check runout with indicator.

[@dirkbanzhaf234]

Always change both break disks and pads.

[@janimara3578]

Hi, I just bought the front brake pads from Bosch and to my surprise only one of the four has a wear indicator. What's is the theory behind this. OEM have one wear indicator for each wheel.

[@BoschAutoNA]

Hi Jani. Thanks for reaching out. Can you tell me the year, make and model of your vehicle and the part numbers on the front brake pads you purchased?

[@martinschmitz8399]

Bonjour Bosch auto parts , ma Kia ceed freinait vraiment mal ( aucun mordant dans le freinage ) et chez Kia ils me disaient " tout est ok monsieur" au contrôle technique ils me disaient " tout est ok monsieur" . le jour ou ma voiture a eu 7 ans donc la fin de garantie j'ai commandé des disques de frein Bosch blue line et des plaquettes de frein Bosch blue line depuis ce jour ma voiture possède un excellent freinage avec du mordant , les disques de frein ne rouillent pas en cas d'immobilisation preuve de l'excellente qualité du revêtement du disques Bosch , puisque j'ai été très satisfait des freins Bosch j'ai commandé tous les filtres de A à Z en Bosch et réalisé l'entretien moi même et démontant ma Kia lors de l'entretien je n'ai pu que constater que les pièces Bosch sont d'une qualité supérieur aux pièces d'origine Kia , voilà pourquoi je n'utilise plus que la marque Bosch pour tous mes véhicules depuis ce jour je n'ai plus jamais eu le moindre soucis et toujours la meilleure performance . .... je suis retourné chez Kia pour plaider ma cause au sujet du freinage et le mécanicien kia m'a répondu en toute discrétion " monsieur Schmitz si votre véhicule fonctionne mieux c'est par ce que vous avez monté du Bosch " de plus les freins Bosch sont vraiment sûrs , silencieux , et résistants a une conduite dynamique ce que les freins d'origines sont incapables de faire!!!! seul problème Bosch ne propose pas toutes les pièces de A à Z je ne trouve pas d'amortisseurs Bosch ou d'embrayage Bosch par exemple , si cela était possible de remplacerait toutes les pièces par du Bosch par ce que je veux garder mon véhicule le plus longtemps possible n.b. que j'ai déjà un excellent niveau en mécanique et un garage a ma disposition mais j'ai du suivre le véhicule chez kia durant 7 ans a cause de la garantie !

[@BoschAutoNA]

Hello. Thanks for reaching out. Where are you located? In France? I want to direct you to the correct place to solve your problem.

[@martinschmitz8399]

@@BoschAutoNA j'avais des problèmes de performance de freinage avec les pièces originales Kia . Depuis que j'ai monté des pièces Bosch j'ai un excellent freinage !!! BOSCH a déja résolu mon problème . Lisez bien mon 1er commentaire qui explique tout . Je suis a 40 minutes de l Allemagne en Belgique

[@cuarto5748]

Bosch pads have no V-ring?!

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@JoeG2013]

are the inner and outer brake pads the same?? looking to install tomorrow

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@BoschAutoNA]

Depending on the application the inner pads and the outer pads are usually the same but there are part numbers where they are different as well as left wheel and right wheel. Most applications all 4 pads are the same. Since we don’t know which part number you are going to install, we suggest as you pull off the used pads off the vehicle you mark them where they came off (inner/outer) and left wh/right wh). If all four coming off your vehicle are the same then the replacement set from Bosch will be the same way as well. If they are different coming off the vehicle then you can match up each used pad to the new pad out of the box. If you give us a part number we can tell you exactly which is the case.

[@JoeG2013]

@@BoschAutoNA it was a Bosch bc 1084 . I put them on and so far so good. Brakes well so far.

[@BoschAutoNA]

We're happy we were able to help!

[@johnmiller9219]

won't opening that bleeder screw let air into the system?

[@BoschAutoNA]

Thank you for taking the time to reach out. We've forwarded your inquiry to consumer care, who should be reaching out to you soon.

[@marco1173]

Not if you have a hose connected to it and immediately close the bleeder screw when the piston retracts all the way.

[@thedeaffarmer4422]

It could. This is why I never touch the bleeder screw. (plus it could create a fail point if not tightened properly) Instead, I pull the assembly apart, and remove the pads, then use a "C" clamp to compress the brake piston. This pushes fluid back through the entire brake system. Just make sure you have your brake reservoir cap off.

[@srikarvundavalli5934]

@@thedeaffarmer4422 For cars with ABS this is not recommended as pushing fluid back through the Abs unit might cause it to fail.

[@johnmoore1495]

You definitely don't need to bleed the brakes while compressing the piston. Just make sure you do it slowly.

[@ncyankee101]

He said the idea was to avoid pushing old fluid that might be contaminated with corrosion back into the ABS module. I have never done it this way but I think I will start. Actually a good idea to freshen all the fluid if you're only doing brakes every 2 years or longer anyway.

[@cbarkwell1000]

J.Moore, Opening the Brake Bleeder Valve & allowing the Fluid to run into a 15 % - 25 % filled bottle is the Professional way to do Brake jobs ; even for your Enemies. Email me & I'll attempt to Screen Shot one of my 1 page Articles from the Professional Bendix Brakes Answerman on this "Critical Subject" that most people don't even do..If I can't S. Shot it, I'll re-write & email , if you "ain't" one of those paranoid Americans. [e-mail] Southern California Professional Automotive background

[@h22bomb]

Bed in at 8:50

[@mattl.4993]

This video fails to play.

[@mattl.4993]

This video fails to play.