BOSE DIRECT/REFLECTING SPEAKER 401 VINTAGE

Visit our store:
www.ebay.com/i...
Free manual Download:
products.bose.c...
The Bose 401 Series direct/reflecting speaker was manufactured in the late 1980s and early 1990s.
Each Bose 401 speaker weighs approximately 12.9 Kilogram. It's essentially an isosceles triangle shape with a base that is 11.1 inches wide at its widest point and 11.1 inches tall at its tallest point. The entire speaker tower's height is 29.6 inches.
Each 401 speaker contains three drivers. It has one 2-inch tweeter and two 6.5-inch woofers. Each woofer is located under one of the two grilles on the speaker's two front faces.
With the ability to handle anywhere from 10 to 200 watts per channel, these speakers will work with just about any amplifier or receiver. Given that they are rated from 4 to 8 ohms, you may want to use an amplifier which runs toward the high end of that range to ensure that it can provide enough power when the speaker is presenting a difficult 4 ohm load.
Compatibility/Impedance
Compatible with amplifiers and receivers rated from 10 to 2
Rated 4 to 8 ohms
Wire recommendations
Gauge
Length
18 (0.75 mm*) 30 ft (9 m) maximum
16 (1.5 mm)
45 ft (14 m) maximum
14 (2.0 mm*)
70 ft (21 m) maximum
Fusing
Series-connected 2A fast-blow fuse recommended
Enclosure
Vinyl veneer finish
Size/Weight
Speaker: 29.6"H x 11.1"W x 11.1"D (75 x 28 x 28 cm)
Speaker pair: 57 lb (26 kg)

[@AudioElectronicsChicago]

Vintage 💪🏻