BOSS ME-90 - All amp models through real amp and cab

[@stratbluesman]

This a great review ! Especially because you are going thru a guitar amp and speakers !

[@sandyturner1911]

The clean stuff sounds really good. I have the ME 80. This sounds better. I'm going to run my fuzz pedals in the Effects loop, and run it into my Radial, going out stereo, to my Boss Katana, and my Marshall DSL 1..it should be fine. Now I just have to update it. Thanks for the Demo.

[@trigliderider]

Thanks for the demo.

[@paulwave1560]

How did you connect your ME90 to your amplifier? are your both output R and L connected to your amplifiers?

[@PedalScience]

Just mono (left) output

[@Arthur-kw6uf]

It is on the imput of the amplifier or send & return?

[@ometgeacio6130]

do they also have a output select preamp?like in the gt effects?

[@PedalScience]

Do you mean output mode?

[@BLACKROZEROCKBAND]

They don't sound that great to be honest. I've got an Me 80 and I found the only way to get the pre amp settings sounding sweet is to plug it in front end of a full Tube amp head on the clean or crunch channel (with a headphone dummy plug in ) with the gain down low on the amp around 3 or 4. I've gigged for years using it this way and it sounds pretty nice. I've got a tranny amp and valvestate I use at home and it sounds terrible thro the pre amp settings in them on the clean channel. I release the me90 has the digital new technology but it a lot of them sound very similar to my Me80. Be interesting if you did a full tube amp head abd cab demo .Cheers for the video any way .

[@addicted2tone349]

Yeah, I just ordered one of these and I think it’s going right back without using it. This sounds like ass

[@carlossanchez-ho5ct]

Looks somebody needs to learn how to use their gear

[@priced80]

@@carlossanchez-ho5ct i think we are all trying to learn. That's why we are here

[@PedalScience]

I'm using a flat response power amp (see video description.) You can't actually disengage the cab sim on the ME-90 (more detail on this in my other videos). Switching the output mode from line to guitar amp just engages an additional filter - some people have gotten around this by selecting a blank IR preset, which works quite well.

[@carlossanchez-ho5ct]

@@TexasBlues-ip6sv read the manual duh!

[@mattdrummer6392]

Ya se vende en México?😊

[@PedalScience]

I would think so!

[@tururutururu2030]

Another noisy one….

[@PedalScience]

The video or the pedal ?

[@tururutururu2030]

@@PedalScience your music concept

[@PedalScience]

Thanks ! 😍