Ford ZF Fairlane 34 Restoration

[@daleyurk4369]

Jason, wow! She looks a treat. And those bonnet springs and brackets!! Nice!

[@BoyAnachronism01]

Everything is looking so lovely aye mate… fresh, clean and new

[@dsrunner69]

Thanks for the video update. The car looks great! Love seeing the the fresh clean pieces going back onto the that beautiful new paint. Cheers mate.

[@BoyAnachronism01]

Yes it’s always a treat to bolt on a new or cleaned up part aye mate.

[@aussiebogan8770]

Great job mate, looking forward to seeing it being assembled

[@stevefalzon2885]

Thanks maté again love your show

[@sandocheese45]

Great to see you Jason. Yet again your work is amazing. Great work mate 👍👍

[@BoyAnachronism01]

Cheers mate

[@darrenpalmer6073]

White really suits the shape of the Fairlane.

[@markbehr88]

Great video Jason. The car is looking tremendous.

[@BoyAnachronism01]

Yes getting excited now that I’m bolting bits on her

[@gedgedk4929]

So awesome to see this beautiful car come together. Ty for putting the vid up. Waiting patiently to see the engine go in and start :)

[@BoyAnachronism01]

Oh mate thanks for sticking around and watching. Yes I can’t wait for the engine to be assembled and put in… then we will be close

[@georgepap]

Great progress Jason…she’s looking good mate!

[@BoyAnachronism01]

Cheers bud… pretty excited now that I’m over the hump of panel and paint… hope all is good with you.

[@Andrew.quigley]

Looking dam nice. Looking forward to next video.

[@BoyAnachronism01]

Cheers bud…

[@samsnelling5204]

You could eat off that paint work. Delicious. Getting so close

[@BoyAnachronism01]

Yeah really happy with it mate. Was down in the shed last night and finished off cutting and polishing the drivers side of the car and it’s near perfect mate.

[@frankagius2364]

Really like this series

[@BoyAnachronism01]

Really appreciate the feedback mate… I’m going to try to make the XA coupe videos more dynamic when I start that resto.

[@rescuedandrestoredgarage]

Such an incredible job on this beautiful car, brother.

[@BoyAnachronism01]

That’s high praise from someone in the know… thank you so much mate. I appreciate the feedback.

[@rescuedandrestoredgarage]

@BoyAnachronism01 you really do incredible work, brother. The wife and I have a few projects, and we are learning every day. We find it awesome to watch others and get ideas, so keep up the great content 👍.

[@carlf8291]

Car is looking very nice can't wait to see it all finished.

[@BoyAnachronism01]

Yeah she’s finally getting there aye mate… the vids will be a lot more fun from now on

[@TheMrShinagami]

You've really made some great progress there, She's starting to come together now. Congrats on putting the deposit on the factory, I know you've been looking forward the that for a while. I cant wait to see it when you get it.

[@BoyAnachronism01]

Great to hear from you mate… hope all is well with you.

[@TheMrShinagami]

@@BoyAnachronism01 Things are going well thanks mate.

[@drifterdrifter9558]

Good work Jake

[@BoyAnachronism01]

Onya bro

[@brucescott2263]

Love your work Jason!

[@BoyAnachronism01]

Thanks so much mate… she really is looking smart now aye.

[@kderbyshire7949]

Very nice job can't wait for the two door to start I live in Tassie 😊

[@BoyAnachronism01]

Yeah same here …

[@phillipleeds296]

Hi Jason, so good to see all the progress and the incredible work you do. The end result will be magnificent. Cheers and regards.

[@BoyAnachronism01]

Thanks for hanging in there mate… the vids should become way more interesting from now on… hope all is well with you

[@phillipleeds296]

@@BoyAnachronism01 A bit chilly in the Blue Mountains right now, but otherwise OK, thanks. Will certainly stick around to see this one finished and what you do with that XA coupe. Regards to your very understanding partner!

[@BoyAnachronism01]

@@phillipleeds296 winter in the blue mountains would be stunning.

[@phillipleeds296]

@@BoyAnachronism01 Always stunning, but especially in winter. Cheers.

[@morantaylor]

I imagine it will be off the rotisserie and into a roller in the next video. It will be good to see it and Pete's XC GXL side by side.

[@BoyAnachronism01]

Oh wow what a great idea mate! Yes we could have side by side footage. Hey thanks so much for the feedback

[@daveb5016]

Looking great Jason, really nice work. Not my taste in colour choice to be honest, but I bet Peter Anderson approves. 😀

[@BoyAnachronism01]

Same here mate, polar white is boring and lacks imagination and skill. I chose it for ease so I can get this car finished and out of the shed so I can start on the coupe. Thanks for watching and your feedback aye. Take care mate

[@andrewstewart8704]

Hi Jason, Awesome effort with this car! I have a ZG but haven't gone the whole hog like you. 1500 or 2000 grit has no place with primer. start with 400, re guide coat and finish with 800 for perfect results.

[@BoyAnachronism01]

Thanks mate… yeah I kinda figured that out by the end but I’ll use your advice when I’m doing the body work on the coupe … thanks again mate

[@chriskyriazis4163]

awesome video Jase

[@BoyAnachronism01]

Cheers Chris

[@V8AmericanMuscleCar]

Great work! Cant wait to see more.

[@BoyAnachronism01]

Same here bud

[@dank5432]

Great progress and I might try your polishing pad on the da sander myself

[@BoyAnachronism01]

It’s a 7 inch pad that fits on the orbital … absolutely brilliant after the grief I’ve been through

[@mickyd8755]

Really coming together well now mate. Seems an age ago when you were on the welder fixing rust.

[@BoyAnachronism01]

It does aye mate…

[@messylaura]

don't throw that sponge pad away yet, its great for putting on the floor jack when you lifting up painted parts like the sub frame or rear axle etc

[@donaldhollums3278]

Your project is coming along, I’m still working on getting caught up one episode at a time. It’s gotta be like eating an elephant, you keep going one bite at a time. If you’re taking music requests I would like to hear some Merle Haggard, John Conlee, Charlie Pride, or even some Alabama, George Strait, John Anderson or Alan Jackson.

[@BoyAnachronism01]

Ha ha there’s a huge list of copy right breaches there mate… I like trying to test the algorithms with obscure music and even then sometimes I get busted lol Hey it’s nice having you along for the journey

[@ellesmerewildwood4858]

Geez, it's taken some huge leaps forward since the last video, looks bloody beautiful. At this rate, next video will be doing burnouts down the street. Don't worry about the F bombs, just bleep 'em out, we'll fill in the blanks.

[@BoyAnachronism01]

lol I don’t know how to bleep things out when I’m editing mate… yes we are so close to the burnout video aye mate. Hope all is good with you.

[@melbgrk6725]

Nice... nice ... Nice ..... well done Jason ...:) ..... I've a question, Did you paint the car same colour as your mate Peter Anderson's beautiful XW sedan ? .... Take care and can't wait for your next vid ... 👍

[@BoyAnachronism01]

Yes mate!!! It was one of the most common colours back in the day. It was the original factory colour that the car was painted and the easiest colour to spray and because I want this car finished asap to get on to the XA coupe I decided to smash it out in polar white. Hey thanks for following the vids and for the feedback mate.

[@melbgrk6725]

@@BoyAnachronism01 Looking forward to your next vid .... 👍 .... Hopefully one day you could put your fairlane beside Pete's XW .....

[@gmarshall1026]

Great stuff as usual Jason cheers

[@BoyAnachronism01]

@@melbgrk6725 great idea

[@BoyAnachronism01]

@@gmarshall1026 thanks for hanging in there on this journey

[@MetalMania3DTV-TAS-AUS]

Sweet so far still watching 😊

[@BoyAnachronism01]

Legend !!!

[@MetalMania3DTV-TAS-AUS]

​​@@BoyAnachronism01 thanks ill tell the wife 😂😅 😊 still watching 👊🇦🇺

[@stevefalzon2885]

Jason just started watching you show it’s great I have a ZG Fairlane learning lots off you. Just a quick question my fuel flap doesn’t close can you get a new spring or repair, I probably have a lot more questions just started on the car. Cheers

[@BoyAnachronism01]

I know a guy who is parting out a ZG mate… he might have a spare flap… his name is Jamie Mack and sells on FB marketplace… if I was stuck like you are I’d consider a magnetic option

[@karlvanboxel561]

Did u sand the por 15 totally off? If so not much point having it was it ? She’s coming on mate

[@BoyAnachronism01]

No mate, I just scratched it up to key in surface

[@karlvanboxel561]

Is there any need to spray rust proofing thru the sills and doors etc?

[@BoyAnachronism01]

I guess anything helps mate… I just flooded the areas I could get to with POR15