Boyd's Savage Axis Stock Upgrades

[@Nobodyever-00]

That guinea pig was a nice addition to the video. I have a ferret myself but have owned many guinea pigs before. I also purchased a Boyd's Stock for my .223 Savage Axis because the polymer stock would cause the magazine to pop out when I fired my gun. What probably caused this was flex from the recoil. Anyway the Boyd's Stock worked wonders, made my gun shoot better. Now I'm thinking of getting the Pro Varmint stock for a more tactical feel.

[@gunsandpigs]

+Reaper1911gr awesome to hear!!! & thanks

[@isaaccruz7010]

The magazine was popping out when firing because you didn’t pop it in good I was having the same problem when I first got the gun I just give the extra tap tap and I will stay

[@MrBlizzard769]

Ordered a Boyd’s spike camp for mine and was also very happy , they do now include the red dot for the safety !

[@Motohumter]

I have the same stock on my axis .223. Looks good and very comfortable to hold and shoot. Enjoy your new stock, good video.

[@tomn5880]

I had a Savage Axis in 243. I actually converted three magazines to extended round magazines. The franken mags functioned fine but Savage is so rigid with their proprietary parts that I got very frustrated and switched to Mossberg. Now I don't have to bung up several magazines to get and extended round box magazine because the Mossberg MVP (Mossberg Varmint Predator) uses standard USGI magazines. I had a lot of 243 ammo so I choose the Mossberg Patriot SS marine Cera Kote with the laminate stock. It has DBM system and the magazines were designed to be stacked. I stacked two, bonded them with JB Weld for plastic. I used the same follower and spring. Two 5 round magazines produced 1 12 round magazine that feeds flawlessly.

[@gunsandpigs]

the worst that would happen is a little slide bite but it would be ok. basically putting pressure on the slide would stop the gun from re-chambering (failure to feed). the shooter would still get one round off which is dangerous because the stray bullet may hit someone. it is an effective way to disable the gunman temporarily. just dont put your hand in front or behind the slide. the extra pressure stops the slide from going far enough to re-chamber

[@gunsandpigs]

I don't blame you, sometimes i bore myself to sleep! It's a tad heavier in the front but I like that, the grip is smooth because i didn't choose the upgraded model with texturing.

[@ALEX-xd7ko]

I have this exact same stock. Your accuracy will greatly improve. You will probably need to shim your mag catch . Open up the gr rigger hole just a tad.

[@brentyoung7356]

I love the looks of Boyds stocks. But I have an Axis II XP. The Axis II is an Axis with an Accu - Trigger and a decent Weaver scope. According to Savage both the the Axis and the Axis II both use the same stock. I called Boyds, they said if the Axis II is not on the list the Boyds stock will not work. I called back hoping to get someone more interested in selling a stock with no luck. If anyone out there has tried a Boyds stock on an Axis II please tell me about your experience.

[@brambo1755]

Brent Young I just got a damn stock from them and it doesn't fit. Got a email that is does. But doesn't. I repeat it doesn't. Fml

[@gtdano]

I bought a savage stock for an Axis and is did not fit. The action will bolt in but the magazine will not engage into the well. There's no place for the rear of the mag to click in. I contacted Boyds and they told me to refer back to the retailer that I bought the stock from since they did not sell it directly to me. That will be bad customer experience #2 with Boyds. (and my last) I'm stuck with the stock and would love to make it work since it's a rubberized coating.

[@gunsandpigs]

Hi Quickz, I got the mag from DK Rat but he no longer makes them. The bolt handle came from ebay.

[@VWOutdoors5]

Thanks for the video. I just ordered the exact same stock for my savage axis 223. in the forest camo. And also purchased a pepper colored for my Mossberg 100 atr 270. They look like some sweet looking stalks, and mine should be in tomorrow. I might do a video but I'm not sure yet.

[@URanInTheUglyForest]

You might consider a dot of bright red or orange nail polish behind the safety to let you know it's status.

[@KhalsaArmory]

Hey Bud, I ordered the Boyds Stock and the bolt handle, where did you get that mag from. I believe it comes with 4 round mag.

[@markohan2017]

I have a Savage Axis II in 300 Blackout - where did you get your bottom metal for your Boyds/Savage video? Please let me know - I am a new subscriber

[@AA-fg3wj]

How is the accuracy from the Axis II 300 black? I want one so bad. Thanks

[@AA-fg3wj]

How is the accuracy from the Accuracy from the Axis II?

[@ProfessionalArmourer]

seriously get some fluorescent red model paint to mark the fire position on the safety the visual contrast is a major factor. Don't want the piggies benefactor to not be around to keep them in carrots (try green grapes some time)

[@gunsandpigs]

Scott Schoemann will do, thanks for the tip

[@captainpegs0740]

Nice stock and guinea pig! Is the reach to the trigger really long?

[@gunsandpigs]

Thanks! The reach feels great for me, I'm 6'2 tho

[@brettbrandenburg2411]

Best looking axis ive seen so far!

[@gunsandpigs]

brett brandenburg Thank you sir

[@S.Womack346]

Can always tell a newbee when the scope is 10 inches off the barrel!😂😂

[@Picasofly]

Looks great! Best workbench ever!

[@Prometheus203]

Thanks for the post, I ordered one of those knobs right after watching!

[@gunsandpigs]

i love mine!

[@deanflewelling8702]

Looks really nice where did you get the bolt handle?

[@glenparker7067]

Thanks for the review. I hope to get one in the same color and style whenever they get them back in stock. I can't believe its only $99 for this stock.

[@gunsandpigs]

Thanks Glen! Give them a call tomorrow, they may be in stock even though the website shows otherwise

[@1quikz28]

thank you I'm looking into getting that stock and bolt hand

[@CahlosHTX]

where did you get the box magazine upgrade

[@luckysouthernboy]

Where did you order that new bolt knob from and how much was it ? one of the only things that bother me about my axis is that my bolt knob barely grazes my scope when i work my bolt because the degrees is so high for those rifles.. Does your new knob still do that or does it miss now ?

[@xcalibre222]

Awesome drop in upgrade! love it! Thanks for the vid.

[@gunsandpigs]

James K. My pleasure sir!

[@Jimmy_Boy_Kalahati]

How does one go about getting a magazine like yours or using an AR-15 magazine? I've got the .223 Axis.

[@gunsandpigs]

they're not made anymore

[@Jimmy_Boy_Kalahati]

gunsandpigs is this a factory mag or a snyder magazine? snydermags.com/index.html

[@gunsandpigs]

neither, it was built by a DK Rat, but he no longer makes them because he lives in Colorado

[@ScreamingReel500]

$90 for one magazine at Snyder. Ridiculous!

[@jasonlopez4855]

Do you know the difference in between white stock and the factory Walnut stock.

[@batmanbeyond400]

*pauses video* *goes to comments* Now that stock looks AMAZING!!! *goes back to video*

[@gunsandpigs]

lol! thanks

[@batmanbeyond400]

gunsandpigs Can you please put a link to the website where you got the stock in the description??

[@gunsandpigs]

i got it at boyds gunstocks

[@gunsandpigs]

Jacob Lord i put the link. it always shows out of stock, call them to verify availability

[@454pakr]

Very nice! Simple installation too.

[@jeffzabriskie9689]

where did you get the extended mag?!?!?!?!?!?!?!?

[@gunsandpigs]

not made anymore

[@edwineugeneeckerjr6335]

ou can still get them on Ebay for around $100

[@tomgallier0103]

Definitely gotta get me the extension for the bolt arm

[@1quikz28]

nice, where did you get your extended magazine and bolt handle?

[@travisparsons63]

Nice gun man.thinking bout get that stock for mine also not sure yet.

[@gunsandpigs]

Do it! Do it now!

[@gunsandpigs]

jk, its great. see if any of your local gun stores have a boyds stock on one of their rifles. you'll see how quality it feels.

[@MrBoo1963]

Where did you get that Mag? I have a 7.08 that is very much the same as the .308 in size.

[@CahlosHTX]

sweet video thanks for the bolt handle link man and stock

[@gunsandpigs]

Thanks!, boyds did a good job

[@stevejames5963]

was that a muzzle brake?

[@gunsandpigs]

yes

[@ChrisFlims405]

We’re did u get the mag

[@Vettespeed]

Ok where did you get that mag from doe?

[@CahlosHTX]

do you have any video on how you put that new bolt handle on

[@gunsandpigs]

I do not. You just screw it on. I'd recommend using loctite as well

[@CahlosHTX]

gunsandpigs i just got my bolt handle its awesome, getting my tacticool stock tomorrow and timney trigger wednesday and my savage will be perfect. till i can buy a better scope to help look further out. thanks for the info on finding the handle just need a 10 round mag

[@gunsandpigs]

great to hear!!! if you find someone selling them LET ME KNOW!!!

[@J3ss3443]

where did you get your bolt handle

[@ALEX-xd7ko]

Mine also has the red dot for fire

[@guerrierodelgiaguaro]

Absolutely a fantastic weapon, please: is that an heavy barrel?

[@gunsandpigs]

no, its just the factory thin barrel. the axis is an "economical" rifle.

[@guerrierodelgiaguaro]

gunsandpigs Hullo Colleague, I have always a doubt regarding the thikness of the barrel: sporter or heavy? Truly does the heating of the barrel affect so much the consistency on the target? For example, what do you suggest for the prairie dogs? Many thanks.

[@gunsandpigs]

some ppl swear by heavy barrels, i've havent been able to tell any significant difference

[@guerrierodelgiaguaro]

gunsandpigs Thank you

[@Mr1MOA]

How did you get a extended detachable magazine for that axis?

[@gunsandpigs]

***** the guy no longer makes them. someone else does but I havent tried them out www.snydermags.com/products.html

[@devinabdrool4626]

What caliber and how much and where did u get it bc im looking for an axis .243

[@jaredcruthird]

is it made for the axis? the ones I found on ebay all are for the 110 series. They will fit but not work properly from what I've researched. Thanks

[@gunsandpigs]

I put a link in the description

[@grantevans9199]

beautiful stock! Can you share where you purchased that extended magazine? I have a model 10 FLCP-K in .308 and would love to fit it with one of these stocks. Would also like to pick up one for my model 12 varmint in .22-250. Thanks for sharing with us.

[@gunsandpigs]

they're not made anymore

[@davidmoore4693]

except your aftermarket bolt handle doesn't line up correctly with the groove in the stock

[@gunsandpigs]

i have no issues

[@davidmoore4693]

i didn't say it didn't clear i just said it didn't line up, nice stock and gun though, and the original bolt is a POS that hit most scopes anyway, so its better that you replaced it, idk if i like the looks of it though

[@gunsandpigs]

yeah, theres quite a few different options as far as bolt handles if this style isnt your cup of tea. If I could only make 1 change to the stock rifle, it would be getting one of the boyds stocks. the handle is nice but it severely needed a trigger job. I heard that the new ones have the accutrigger.

[@D148521]

Nice. I may have to see about uprading to one of these stocks. Thanks for the vid. Donnie D

[@gunsandpigs]

my pleasure sir

[@MattSeesGray]

I have this same rifle. Where did you get the bolt handle? Did you have to get it threaded somewhere? I want one. Also, I don't have the extended box magazine for it, I have the one that sits flush (I live in CA.) Will it still fit with that Boyd's wood stock?

[@gunsandpigs]

Matthew Gray the link for the handles is in the description, the mags work good in the stock

[@tomgallier0103]

Hey man... Great job. Been looking for after market stock. The composite one sucks...

[@gunsandpigs]

Thanks, its sooooo much better

[@tomgallier0103]

Just looked Boyd's up. Fair price... I didn't hear how much...and where to get the bolt extension. Only one...I could find is for the 700

[@gunsandpigs]

on ebay, i believe its by southern ordanance. but can just type in "savage axis bolt handle"

[@mylesgrant2113]

Where did you get that magazine and where can I get one?? I looked for one that would fit my axis before I sold it, I really didn't like that crap mag that came with it.

[@gunsandpigs]

not available anymore

[@Havoc7991s]

Where did you get the bolt handle from on your axis? I'm having clearance issuses with my scope. It looks like your's is longer and might work.

[@gunsandpigs]

i put the link in the description. thanks for watching

[@alexwix6289]

I bought a axis in .308 about a year ago and its not the most accurate rifle iv'e ever shot. I get 1.5 inch groups at 100 yds. i figure its due to the play between the rifle and the stock. im now looking into a boyds stock but with the axis being between long and short action, did you get the short action stock?

[@gunsandpigs]

Alex Wix yes, it's a short action stock. I also did a trigger job on mine

[@alexwix6289]

did you get a new trigger or just modify the original?

[@gunsandpigs]

Alex Wix I just modified it. It's really nice now

[@ProfessionalArmourer]

Plastic stocks are notorious for skewing accuracy due to inherent flex in them. A properly bedded wooden or metal stock (yes metal) are the standards used in competition shooting because of this.

[@gunsandpigs]

i agree Scott

[@xXxBADxASSxBITCHxXx]

did the scope base come with the gun ?

[@gunsandpigs]

it came with one but i bought this one seperate

[@46738ek]

did you put that weaver rail on that or did it come like that from the factory?

[@gunsandpigs]

i put it on. its a 20 moa rail from egw. i decided to go with low mount rings instead of the larue mount due to high shots

[@46738ek]

Nice. Im thinking about getting an axis for the low cost but great shootability

[@funckycolemedina99]

Where did u find the magazine

[@gunsandpigs]

funckycolemedina99 custom made but a company called snyder magazines makes them too

[@CahlosHTX]

hey bud do you have any videos of your grouping i went shooting sunday and my axis is giving me horrible groups just wanna see other axis onwers grouping thanks..oh i found a guy that makes 10round mags for the axis

[@gunsandpigs]

sorry, I dont make those types of videos because i use my phone to record. but i dont have any issues with my groups. make sure that your barrel isnt rubbing on the stock & the type of ammo you use is also a factor

[@CahlosHTX]

i haven't checked to see if it is rubbing on my boyds stock and i was using match grade ammo winchester and i shot hornady vmax ammo i think it might be my optics or the barrel heating up

[@xXspectre170Xx]

gunsandpigs what kind of muzzle brake is that? Is that the standard barrel you threaded? How well does the brake work?

[@gunsandpigs]

it's the YHM 3080-ma. I worked great

[@xXspectre170Xx]

gunsandpigs Your axis is the standard first gen not the axis 2 or SR right?

[@The_Hi_Life]

I just recieved this identical stock for my savage 110, beautiful stock, but was worried that there were no pillar beds... Any concerns with accuracy/ durability over time without installing pillars and, or glass bedding?

[@gunsandpigs]

not as yet

[@scottsaunders1199]

what bolt is that on the axis?

[@1941pearl]

What caliber do you have there? The stock is beautiful.

[@gunsandpigs]

308

[@mattmateo9221]

hi, iv got the same savage axis in 308WIN too, im french and i dont understand in boyds site, what the difference in thumbole model with detachable box mag long or short i need ? I THINK LONG for 308 ?

[@gunsandpigs]

308 is short action

[@mattmateo9221]

ok thank's a lot

[@DrOksalev]

What magazine are you using?

[@jeffreya8329]

does the stock feel hollowed out or is it fully made of wood ? because my orginal savage broke it was hollowed out now im looking at this

[@gunsandpigs]

no

[@3GUNJUNKIE1998]

Wgere did u get a magazine for your axis?!

[@bellasenf27]

whats the advantage of the longer bolt handle?

[@gunsandpigs]

the angle helps avoid bumping into certain optics & the handle is bigger so its easier to grab and manipulate. at least it is for me

[@icecolddr-pepper4486]

If you know anything about physics, the longer a lever(bolt in this case) is, the less force you will have to apply to move whatever is on the opposing side...

[@michaellasher925]

What range are you shooting this currently? Had an trade offer for one of these and wondering how well the Boyd's stock will work for long-distance target shooting.

[@gunsandpigs]

fushion tactical in forney tx. the stock is great

[@michaellasher925]

gunsandpigs Sorry for the confusion, what I was asking was the range-distance rather than the place you are going to.

[@gunsandpigs]

currently 100yds, but they're finishing up their 300yd range. no 1000+yd ranges here :(

[@michaellasher925]

gunsandpigs That is unfortunate. Looks like I won't be getting one right now after all. I would definitely be curious to see how these stocks improve the long-range shooting capabilities past 500 yards.

[@gunsandpigs]

if you want to improve long range shooting for the axis or any bolt rifle get a timney trigger, match ammo, quality bipod, free floated stock, & a quality scope/knowledge. Plus work on your breathing & trigger control. I don't know of any stock that will improve your shooting. The boyds stock improves durability, comfort, looks a billion times nicer

[@GB_golf]

Please let me know where you got that bolt handle

[@gunsandpigs]

i put the link in the description. thanks for watching

[@jaredcruthird]

where did you get your bolt handle from or did you mod the stock one?

[@gunsandpigs]

I got it on ebay

[@TacticalPursuits3093]

Awesome stock! Could you please check out my savage axis 308 build that I just did and let me know what you think of it thanks!

[@johnnyboudreau2687]

How do i get one

[@49ergang60]

Where did u get the bolt handle

[@gunsandpigs]

ebay

[@49ergang60]

gunsandpigs For how much do u know

[@49ergang60]

gunsandpigs For how much do u know

[@gunsandpigs]

Honestly I dont remember, but there's a link in the description. $40-$50 I think

[@hensleyjames1526]

what muzzle brake is that, and how much was it?

[@gunsandpigs]

yhm 3080-ma muzzle brake w a 5/8x24 thread

[@gunsandpigs]

theres one on ebay right now for $65. i just gave mine away in a youtube contest

[@gunsandpigs]

yes, they both do

[@mattleonard3241]

Hey i ordered 2 new gun stocks from here over a week ago and they haven't said they have been shipped got any ideas on what to do? I've tried calling them and emailing them they never return

[@gunsandpigs]

Matt Leonard I never had a problem contacting them. I'd probably just call again or see if they have other numbers on their website

[@mattleonard3241]

Okay thanks for the advice

[@stuntakstur]

Hi, why did you upgrade your stock? Because of the recoil?

[@gunsandpigs]

nope, because it felt cheap & would flex a lot

[@stuntakstur]

they dont make stocks for leftys :/

[@gunsandpigs]

thats lame, sorry

[@xsun5]

How did you get this hi capacity magazine? Mine comes with a 4 round one.

[@mericaeagle9319]

its an aftermarket magazine made with an origional mag welded to a g3 mag to make it hold 10 rounds. there over 100 dollars a peice.

[@airsoft10187]

What size Allen key for the screws?

[@gunsandpigs]

I believe it's a 1/4 hex

[@airsoft10187]

Pigsnguns Thanks!!

[@airsoft10187]

Is it a good stock? Have you seen any cracks or anything like that?

[@gunsandpigs]

ghost_squad_airsoft_ great stock, no problems

[@herberthoover8275]

is that a jack russel terrier

[@gunsandpigs]

no

[@bigsanchez22]

should have put the magazine conversion kit on it.

[@JayWolf41]

What bolt is that on your axis?

[@gunsandpigs]

One i found on ebay. i think the link is in the description

[@randylagasse7767]

I bought a Boyd's stock for my Ruger American, bad idea! It came to me scratched from the hardware bag that was in the box. I called Boyd's and said they can swap it out but I have to pay the shipping back to them. So I mailed it, 2 weeks goes by and no response. I called Boyd's and they told me if I wanted another stock I will have to pay the shipping again, and if I wanted a refund it was a 20 percent restocking fee! I told the it wasn't going to happen. I called my credit card company and disputed the charge and explain to them in detail about the whole transaction for their report. The very next day my credit card company called me back to tell me Boyd's gave me a full refund plus shipping. So buyer beware of this company!

[@ozarkrogue7144]

How much does the stock weight?

[@gunsandpigs]

idk, but it is heavier than the factory stock

[@ozarkrogue7144]

thank you

[@khiemluong-c6f]

What was the magazine clip that you used?

[@gunsandpigs]

it was custom made by a guy

[@MrPlecemanvpd]

Your mount is backwards

[@gunsandpigs]

yes

[@alexanderfontenot87]

Btw were u get that mag

[@gunsandpigs]

I got the mag from DK Rat but he no longer makes them

[@alexanderfontenot87]

Oh well I'm going to keep looking for an extended mag

[@gunsandpigs]

me too sir, me too :(

[@alexanderfontenot87]

Will this fit a savage axis xp ?

[@gunsandpigs]

i dont think so

[@seisont]

Yes it will, the XP just means it came with a scope mounted from the factory.

[@gunsandpigs]

good to know, thanks clint

[@alexanderfontenot87]

Yea I figured that out the other day

[@mericaeagle9319]

has anyone tried the boyds stock that has the 10 round box mag upgrade?

[@inlandbhsk8r]

Merica Eagle I'll be getting mine in a month or so. If I remember, I'll let you know how it goes.

[@jeffzabriskie9689]

where did you get the mag upgrade?

[@johnnyboudreau2687]

How to order😅

[@Tactical-sg8eg]

Where is that mag from?

[@gunsandpigs]

It was built by a DK Rat, but he no longer makes them because he lives in Colorad

[@shanejohnson9208]

where did u get the magazine for it and will it fit right in or do u have to adjust the stock a little ?

[@gunsandpigs]

they're not made anymore

[@dougkidd4799]

Looks great

[@sanoshot]

Lol.....why is your scope mounted so high!?

[@gunsandpigs]

sanoshot :( cause I can't find a lower rail & I love my 1 piece QD mount

[@ALEX-xd7ko]

I'm more curious about that magazine

[@MHSMokeEater]

Awsome Stock, Love to get one of these rifle's just one thing man Muzzle Awareness on the Guinea Pig.

[@gunsandpigs]

lol, yessir!

[@cyrilbutt1626]

Who put a mag in a gun with live rounds in it?????????

[@gunsandpigs]

Cyril Butt I think it's a job for scooby doo

[@armaethonorem4460]

Looks nice.

[@gunsandpigs]

thanks

[@noahtotzke1526]

What kind of bolt handle do u got on that savage I want to get one for my gun

[@gunsandpigs]

Noah Totzke found it on eBay I think

[@SuperKennyo]

dude you don't have to go far to hunt varmints

[@jayflynn9832]

How much weight does this stock add? I like heavier rifles :) Do they make stocks for the Savage Axis Heavy barrels?

[@gunsandpigs]

I'm sorry but i never weighed it. I love it tho & it definitely is heavier. As long as its the same receiver, there will be no issue. No as far as the barrel goes all you would have to do is mount the axis in the stock & slip sandpaper between them. Sand it down until you reach the level of separation you desire. The wood is the same color the whole way through so you don't have to worry about removing the finish off