as soon as i saw the thumbnail i knew it was WhistlinDiesel, it would be interesting if you could do more car related projects. Love your videos
@JulesGryczewskiАй бұрын
100%
@Letshavefunwithcheetah15 күн бұрын
Same
@marshallerickson493Ай бұрын
Barely woke up, opened my phone, got the notification, and now I’ve never been happier to be awake
@Tom_FoolerАй бұрын
Same here
@renefernandez4965Ай бұрын
Me toooo
@KingstonCr8tiveArtsАй бұрын
OMFG Same!
@Wuzup14119Ай бұрын
Me too, bro
@thatoneguyW7Ай бұрын
Sameeeee
@DevilsCustomsandCreaturesАй бұрын
You gotta send it to him! It's nice to see a fun build a bit different than what you mostly do (which is awesome anyway). Love it!
@OBSDCC7Ай бұрын
The model is made of styrene, paper and plastic. It wouldn’t survive 20 minutes in Cody’s presence lol
@InfantrybobАй бұрын
“This diorama means nothing to me” probably Cody.
@woody442Ай бұрын
I agree with all three of the previous comments.
@DavisMann-fy5foАй бұрын
I don’t agree with any of the previous comments accept for the 4th one
@faithrider94Ай бұрын
"what is this, a jet powered merry-go-round for ants?" - Cody probably
@adamroban7934Ай бұрын
Wow! I hope Cody sees this!
@heccingustinluedeke6154Ай бұрын
Such a random choice, but well deserving of a whole video
@apathtrampledbydeer8446Ай бұрын
Whistlin' Diesel should recereate one of you creations in 1:1!
@tteok_tteok_gooseАй бұрын
I saw my notification and came as soon as I could 🫡
@piperatthegatesofdawnАй бұрын
Ok
@Sergeant_Davey_Coterie_Of_ArmsАй бұрын
It was a great video!
@tomtruesdale6901Ай бұрын
That build is crazy insane both the real deal and your model. Well done.
@galaxykinggamer508219 күн бұрын
Bros voice sounds so good! I swear I thought I was listening to an audio book!
@lolabun715Ай бұрын
Brown 4.0 got a sensible chuckle out of me. 😄 Great video as always!
@AndrewKuntzmanАй бұрын
Now that was a wild diorama not expecting that
@trainfan9985 күн бұрын
I actually watch that KZbinr quite a bit. He's crazy, but you have to admit he is entertaining.
@jasonshiers5771Ай бұрын
No better thing to watch on a sunday
@CalamitiousАй бұрын
Euros final?
@CalamitiousАй бұрын
Or are u American
@jasonshiers5771Ай бұрын
@@Calamitious , Nah British but this channel is awesome .
@CalamitiousАй бұрын
@@jasonshiers5771 yep a great channel, who I have been following for a long time but I feel I wouldn’t take this video over the final 😅
@JulesGryczewskiАй бұрын
Yessir
@modelermark172Ай бұрын
This is whimsical and fun as well as being a good exercise in problem solving to make an animated model. You never fail to amaze, Boylei! Thanks for sharing this ! 360th Like.
@TylerKrickАй бұрын
Brown 4.0 made me lol 🤣
@Sergeant_Davey_Coterie_Of_ArmsАй бұрын
Great video!! Keep it up my man. I hope Cody see's this
@CaseySprengerАй бұрын
This is awesome. Next time can you do a "lost tapes" diorama of the Oklahoma Octopus? Or maybe a bigger merrygoround!🔥
@marshawargo7238Ай бұрын
A swing set that doubles as a gallows? A seesaw that cuts "things?" in half or pounds them into a flat oily disk? The slide will send the innocent rider into the large mouth of a large mouth bass, who's been patiently waiting, all day or all week, depending on the weather! Perhaps the monkey bars would be a better gallows? Maybe, maybe not😂... just a thought ❤
@0wl999Ай бұрын
I appreciate your tribute build. If anyone hasn't seen the original video on Cody's channel I highly recommend it, it's mind boggling, hilarious, and scary all at the same time. Good job Boylei !😅
@timothyreeves615Ай бұрын
Really love these little detours into different subjects and genres; really helps keep the channel feeling fresh. +1 engagement 👍
@bowieincАй бұрын
First time seeing your channel. Really enjoyed your blend of speed/ project progression and details shown. It’s a difficult balance and you do it well:)
@nyshockartistАй бұрын
Dude, the quality of your work, looks more and more professional every video. You are killin it, keep going :D
@furrymessiahАй бұрын
Unexpectedly here super early.
@lydiaberg2184Ай бұрын
Your maturity does you credit: not once did you make a “this ain’t rocket science” crack. Well done!
@jamescotter611428 күн бұрын
That may be the best thing I ever saw.😮
@charlesmagruder6603Ай бұрын
I know this seems out of the blue, but can you make a diorama of a deep sea oil rig with a sea monster? That would be awesome
@GoldShark21Ай бұрын
I love your videos and you have inspired me so much. I cannot thank you enough for everything. (Also make another train model those are my favorite!)😊
@SneakyNinja5225Ай бұрын
LETS GOOOO. UNKNOWN COLLAB???
@C75adАй бұрын
I would love to see a collab with North of the Boarder
@JustAboutAnything66Ай бұрын
I can't watch the video at the moment, but I have to say right now, I really feel this one!!
@TheGutsCasualGamerАй бұрын
Almost midnight, always there for the Boylei drops, w video
@wallabaatarАй бұрын
Spinning uncontrollably on a merry go round was literally my childhood nightmare….so I am wondering why this video was still so fun to watch. What a great build! Thanks Boylei.
@brendeng68938 күн бұрын
I love the link to the actual video at the end, thats awesome
@FistcrazzyMusicАй бұрын
I love your content Boylei Hobby Time👍
@deviousraptorАй бұрын
What a creative piece! And im actually suprised at how fast it went at the end. Using motors like this in dioramas would be awesome to see from you again! Maybe in a Wild Imaginary West wind-powered machine!
@hypilee3079Ай бұрын
Now can u make a diorama of the killdozer
@sabersight908Ай бұрын
hmm almost getting some bobby fingers vibes from this but tbf nobody can beat his crazy dedication to the bit xD
@neonnwave127 күн бұрын
"You spin me right 'round, baby, right 'round Like a record, baby, right 'round, 'round, 'round You spin me right 'round, baby, right 'round Like a record, baby, right 'round, 'round, 'round"
@p24p14Ай бұрын
It is weird I've now seen this first without having watched cody's video?
@SeagulBeagul11 күн бұрын
whistlinDiesel would be proud
@mitchmorrow1726Ай бұрын
This us awesome! The 1977 version of this is six friends spinning it up as fast as humanly possible. If you stayed on, you were the playground equivalent to King Arthur.
@iyervikingАй бұрын
One of the main reasons we love your videos is that you’re a really talented and skilled person who is not an attention whore like the inspiration for your diorama.
@Vault57Ай бұрын
Just awesome!
@DREDD_BOTАй бұрын
Whistling diesel the best collaboration
@kharnethebetrayer4125Ай бұрын
I just love how bizar a concept of a model this is. Inspiration comes from weird places😂
@display1718Ай бұрын
@whistlindiesel yeah. From fantastic and geams to real life
@tankertom3243Ай бұрын
The ground around the edges of merry-go-rounds was always grassless and often even worn down to the point that there would be puddles of water after a rain. The controller should have been in the middle because of centrifugal force. Yes, when I was young somebody would lay a motor bike on its side with the rear tire on the merry-go-round edge and 1) see how long we could stay on, 2) how fast could we get it going? Yes, somebody flying off and onto the bike was hilarious. We also did tough guy contests and held onto the horizontal bars with just our hands. At some point you would be straight out like a horizontal pull up, but not for long. The fun part was hoping the handle bar on the bike did not shift, that was also funny. It hurt, but was funny. The best we did was with Mikes Kawasaki 125. Mike held the throttle and managed to shift into 2nd gear somehow, while me and Jim held the rear tire to the merry-go-round. Somewhere during this both Jim and I realized that holding a motorcycle rear end with our hands about an inch from spokes and drive chains going real fast was real dumb. But man were we cool for about a month. After that the center Merry-go-round bearing was never the same.
@justanaverageaxolotlАй бұрын
We all know who needs to see this
@rowanstephenson3192Ай бұрын
This is genius …. Never heard of the Cody Guy but this is really great ❤
@alexmccutcheon10Ай бұрын
Not what I was expecting but this was really cool
@henrikdagil3684Ай бұрын
Fun little gimmick, i can sleep now with a smile on my face 🌙
@JosiahTindalАй бұрын
Yo I’ve been watching your videos since the amethyst cave video, you’re awesome man keep it up😉
@cotton678Ай бұрын
Whistlindiesel should respond to this video!
@user-pz5qn1qj5yАй бұрын
Cool
@IIIIIIIlIlIlАй бұрын
Yo, it's WhistlinDiesel!!!
@adelekefaruk2319Ай бұрын
Thumbnail 👍 😅👏
@russellpoland6637Ай бұрын
That was one WILD build! And I am sure the ride was as well! I got sick just watching the mini! Whoa! That guy needs a hobby! Something a little more "stable!" HA Great build as always Sir! Thank You for sharing! This was a most unusual one to date. Looking forward to the next one. Take Care, Be Safe, God Bless, Later
@EvanAfton-p6v22 күн бұрын
Bro went nyoom on it.
@2ndGear-Ай бұрын
What a heck of a collab
@christineblanchette598621 күн бұрын
It’s not a Collab
@Dorito_OverLord_Music22 күн бұрын
your voice is so calming i fell asleep lol
@dartmart9263Ай бұрын
WOW, I can definitely see how the real one could be fatal, easily
@paladroАй бұрын
great source for your inspiration )
@GudsurАй бұрын
Now THIS is an epic tribute build. Right on!
@burnthewitch_Ай бұрын
I think the project would have benefitted if you had purchased a disk for an angle grinder, or something similar: They're already perfectly circular, they come in different sizes, and they're specifically designed to spin rapidly without sacrificing structural integrity.
@IskelderonАй бұрын
Awesome job and I love that you even added some randomness to the flame by using a ball of filament wire.
@luke_from_onlineАй бұрын
Fr the colab I didnt know I needed. Love both channels, been a fan of both for a while. Great video
@NORWEGIAN-AIR-ENJOYERАй бұрын
7:17 eco friendly wood veneers 🗣️ 🗣️ 🗣️ 🔥 🔥 🔥
@lyonesskimАй бұрын
LOVE IT! and no spontaneous disassembly!!!
@scottjackson1209Ай бұрын
This is so awesome! I think it would be cool for you to do other viral moments by big youtubers going forward! I'm thinking Cleetus Mcfarland in his ripsaw, or jet boat or something lol
@thesaucyloraxАй бұрын
Boylei in the morning, House of the Dragon in the evening. Sundays are great
@garzilla7123Ай бұрын
That was a trippy build, really fun 😊. 👍👍👍
@masterofnone1776Ай бұрын
I didn't have a low key Whistlin' Diesel Boylei Hobby colab on my bingo card for July but here we are. I'd love to see your skills on a Roadkill build!
@FeralLeatherCraftАй бұрын
This is the crossover episode I have been dreaming of
@och70Ай бұрын
Best. Playground. Equipment. Ever.
@rhythmtreble7311Ай бұрын
Mah boi whistlindiesel !
@MGB-learningАй бұрын
Always an Outstanding Build, Video and Presentation.
@ladytara7Ай бұрын
the brownest brown
@theindyjtАй бұрын
This is one of my favorites. Great work.
@SolarcraftingАй бұрын
Another amazing build Boylei. Keep up the amazing work. ^_^
@henrikboucher2398Ай бұрын
I want to give ideas: first one is ww2, Ww1 diorama or video games diorama
@50goingon15Ай бұрын
your engineering skills are on par with your creativity.
@user-ml5sg7ut2uАй бұрын
I love the work this dude does
@wistercrimson3904Ай бұрын
Well as they say, it do go fast. Lol great job thanks for sharing.
@F40M07Ай бұрын
HELL YEAH
@FECMakerАй бұрын
You never cease to amaze. Awesome build!!!
@Snakeboi276Ай бұрын
I’m gonna put it out there. This this is cool
@caseywood9781Ай бұрын
If you used a compass/dividers, you too could make perfect circles that divided into six equal pieces
@codybrown7196Ай бұрын
That was super cool man good job.
@slserenaderАй бұрын
if only wistlin diesel saw this video
@edanwallgejwАй бұрын
Loved it! Thanks boylei.:)
@CowboyKenFLАй бұрын
Nice! LOL Something real and yet outrageous.
@ScaleModelGeekАй бұрын
Just when you thought it was safe to go to the playground again. Great build.
@WhompBunnyАй бұрын
Oh my goodness look at it go
@jdubb1973Ай бұрын
This one is hilarious I love it makes me laugh.
@The_comanderАй бұрын
Great video
@UnclePipАй бұрын
I'm not sure, but the pipe bender is used inside of metal pipes to prevent the pipe from collapsing while bending
@JayPoo1321Ай бұрын
Brilliant! Absolutely brilliant!
@hamburger_192Ай бұрын
I'd really love to see something about the new triceratops skeleton dug up in Colorado recently
@cephalopadАй бұрын
This was awesome, although I don't understand why the base was made out of polycarbonate coated with a wood veneer rather than just wood (which would have presumably been faster and easier). ... Upon reexamination, the reason seems to be, "because [polycarbonate] is two hundred and fifty times stronger than glass." ... Although after Googling to determine which material is stronger between glass and wood, all of the results are about transparent wood. Therefore, he should have used transparent wood (whatever that is) instead of polycarbonate. And then coated it with a wood veneer.