BREAK THIS SKATEBOARD WIN $10,000

[@No-oz8lz]

I cracked up when Carlos said "I'll go get the broom" XD

[@braidan7199]

The Zegon oh my goodie i cracked up

[@chancebounds6964]

Fetty: brings out Glock Also Fetty: it's notta power tool

[@adamstrickland6749]

Chance Bounds It’s not

[@chancebounds6964]

Take the fucking joke ik it's not a power tool I'm not dumb

[@ferret1252]

@@chancebounds6964 to no ruin your joke, but a firearm is a machine, it uses gas power, so techinicaly its a power tool

[@KawaiiM4A1S]

@@ferret1252 aaron said he meant electrical soooooooooooo.

[@dannyboi9552]

@@ferret1252 what about self actuated firearms, like bolt guns or pump shotguns?

[@bobgoat5994]

I don't know whats worse, the fact that he thought lighter fluid would burn hot enough to melt steel, or that he could break 5 pieces of steel rebar in half with his foot and a block of concrete.

[@adamedgar7794]

you know what they say, dank memes melt steel beams.

[@chaseramos4865]

lighter fluid doesn't melt steel beams

[@adamedgar7794]

@@chaseramos4865 DANK MEMES. MELT STEEL. BEAMS.

[@alansmithee419]

@@adamedgar7794 or the fact that after bending one way, he hit it the other way and fixed it. Also, the rebar will be weakened by the heat, though he probably overestimated by how much.

[@adamedgar7794]

@@alansmithee419 Yeah, clearly. With constant heat, the metal's breaking point will wear over time. And eventually, the metal would break after constant stress. Also, dank memes melt steel beams.

[@Seal1H]

The first attempt at breaking Obsidian with an iron pickaxe~ May 18 2009.

[@OutTheWindows]

You can actually break obsidian with your fist...

[@dlsld770]

Chris F or can you *triangles everywhere*

[@imadeyoureadthis1500]

Chris F I’ve broken it before with my fist lol

[@KevinEF]

@@Churdington how did so many people take this joke seriously... he put a date on there to make it more obvious. Almost everyone knows that obsidian isn't strong, people who game aren't stupid

[@KevinEF]

@@Churdington I learned in like 6th grade

[@Steven-gv1ke]

*Non-power tools that would have worked:* *1. Hacksaw with bi-metal blade* *2. Bolt cutters* *3. Cutting torch* *4. Plasma cutter*

[@Xsidon]

how is a plasma cutter not a power tool?

[@DaSlotho]

bench vice...simple physics

[@_droid]

he had a propane torch. all he had to do was heat it up to make it soft enough to bend. using the lighter fluid was a waste of time because it's not very hot. put the torch itself right on that metal

[@erikstraathof]

just freezing it with liquid nitrogen then super heating it would work too

[@chriskoogler5496]

where is this man gonna get a plasma cutter

[@whoopsies3412]

Can't believe I just watched 17.00 minutes of a guy trying to break a skateboard lol

[@mihatheogking]

Same ikr

[@nana78393]

Ikr, it's also 1 in the morning here so I should be sleeping lmao

[@heathercharanek5404]

ya when u say it like that it just is weird

[@nickthecherryking682]

A *rebar* skateboard

[@mistyy-16]

It’s 4am and I’m watching it

[@sethwatkins5909]

So instead of using the torch as a torch he used it to light lighter fluid....

[@zach4784]

seth watkins Well it wasn’t a flamethrower a flame wouldn’t keep without lighter fluid it’s simple pyrotechnics

[@TitanBeats]

the lighter fluid burns and heats up before the rebar just blowtorching the rebar would let fetty get it red hot or atleast hot enough to easily bend and or snap the metal

[@CODzyzz]

@@TitanBeats blow torch on same spot for 3 mins + lock cutter = gg

[@alexcrowder1673]

@@zach4784 Either you are trolling, or you don't understand how a blow torch works. This isnt a 12th centery torch we are talking about here.

[@SB-SB]

@JaysonSR that's what I was thinking as well but also a other major flaw would be the tank size. No way he would get more than 1 or 2 bars melted. Those torches last a while but getting steel to a melting point takes a while too when using that specific torch. All I'm saying is given the best case scenario it was still impossible. Next time he needs to bring something highly corrosive. I think that could at least get it weak enough to snap it.

[@tommygolbranson6623]

Aaron: “the ultimate twist with this video...” Fetty: “ ...is that it weighs more than Carlos” 😂😂😂

[@brailleskateboarding]

So good

[@shadill9461]

So, no head?

[@gameshade0864]

The longer drawn out version

[@lilhadessse6670]

all i could think about

[@sinner3372]

Classic

[@pinkjacketvideos8370]

*_breaks ankles_*

[@TheChos3nOne]

Damn it

[@kaysonwhitlow635]

Places on train track, train just explodes

[@thatshitcrafishfila208]

Or no train shows up

[@AFishBicycle]

“Fetty Destroys Everything” brilliant I would watch every single episode Please make this a reality!

[@brailleskateboarding]

Oooooooh I like it!

[@YungOmni]

yeeeeee

[@vapegod668]

Yes

[@mtgteeto5286]

Yall we aint even joking... PLEASE MAKE THIS

[@danielmoore2474]

Please make this!!

[@primordial0285]

This was a tiiiiiinnnnnyyyyy bit rigged against him honestly

[@13vatra]

All of the 10k challenges are. Aaron isn't about to actually pay that out.

[@bondedwithpotatoes0076]

That is the point.

[@lamesaqopenthempacksfoo9661]

It was fair

[@lamesaqopenthempacksfoo9661]

10 grand to break a board should be an uphill battle right ?

[@CaptainHorn]

i'm just pissed Fetty didn't get $10,000, a man's got hospital bills his Braille sponsorship will very slowly help him pay off.

[@xxgoldmoney]

Hospital bills from what

[@fannymorein]

@@xxgoldmoney He broke his jaw among things

[@atrailofblood]

they should give him 5k for effort

[@davidbaranski7718]

You just knew he was scared of losing the $10k

[@BalterBlack]

Yeah why wouldnt he

[@CleverTricksGames]

If he had focused on the weld points near the nose or tail instead of the middle of the board his chances would've been greater. That was a wild ride though. I feel a little too engineered for him to fail. "Here break a board clean in half made of rebar."Rigged! Props to Fetty for the full send.

[@mikehall4730]

They needed jet fuel

[@AfromanSkeeter]

Not necessarily true. Welds are going to be as strong, or stronger, than the rest of the surrounding metal. Unless the welds were not done well.

[@bigb67676]

@@AfromanSkeeter The heat affected zone around the weld could be weaker than the weld and the rest of the metal though

[@player-x1754]

Best Braille vid ever😂😂😂#fortnite

[@KetansaCreatesArt]

They should focus on skating skills, for durability test, rather than uncivilized manner.

[@hiensanity4665]

So today we learned that wearing a shoe over a shoe helps you kick flip

[@brailleskateboarding]

Apparently haha!

[@YuriDontPlay]

If you think about it he’s giving himself more area to whip it more slide more flip

[@RicelingOfficial]

I had no doubt in my mind that the board couldn't be broken, but I will say... Fetty definitely took it down much more than I thought he would well done Fetty! :D #notificationsquad

[@brailleskateboarding]

Yes!!

[@Ana-mg7ko]

Aaron“We’ve literally broken everything” Nigel”well yeah, you gave it to fetty” 😂

[@toooooooooooooooooooooooooooom]

This is like watching teenagers on adderall.

[@zumwaud2]

its not like.. it is.

[@DalaganGarona]

@@zumwaud2 teenagers who forgot to take their morning Adderall*

[@Xentryl]

Or with ADHD

[@Xentryl]

@@DalaganGarona I felt this

[@rjthereptilekeeper9905]

Bob 😂🤣😂🤣😂🤣😂🤣😂🤣🤣😂🤣😂😂😂😂😂🤣😂🤣🤣😂🤣🤣😂🤣😂🤣😂🤣😂🤣😂🤣🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣😂😂🤣😂🤣😂🤣🤣🤣😂🤣😂🤣😂🤣🤣😂🤣🤣😂🤣😂🤣🤣😂🤣

[@metalmyke1]

If the Zombie Apocalypse happenes, I want Fetty on my team.

[@brailleskateboarding]

Seriously

[@metalmyke1]

@@brailleskateboarding Indeed!

[@pepega3368]

You know this, boy got his free taco

[@mazon33]

*falls

[@TXRager]

Ha ha never eat a taco especially a free one a skateboard.

[@raidersrevenge9428]

Trips*

[@cryingattheclub5150]

No one: Fetty: iT wEiGhS mOrE tHaN cArLoS !!?!!

[@deadlyoppai6756]

lmao that sent me

[@seungson6514]

30 min wasnt very fair esp when you hid the main tool

[@guppy719]

Well the main problem was his choice of tools

[@slugger9492]

"Only thing you cant brake is vibranium" Thanos: "Hold my beer."

[@VinnieBanhClips]

Dang Fetty went in 😂

[@brailleskateboarding]

Seriously!

[@adrianespinoza4431]

What sup vinh

[@happycamper4315]

"Ten thousand dollars doesn't mean anything if you can't see." and other words of philosophical wisdom. - Gabe Cruz

[@Splizzniff]

What is this, Mr. Beast?

[@JColt]

NO, it's KZbin 2019.. making bets on KZbin will now be a trend.. not just a Mr. Beast thing.. So sad, to be honest.

[@ligmasurvivor997]

@@JColt what's your point? How is that sad? It's entertaining..

[@thedenverog3585]

@@JColt if you had subs you'd do it too

[@JColt]

@@thedenverog3585 No I wouldn't.

[@joshuaeppinga9706]

@@ligmasurvivor997 the pain in my stomach is sad

[@sxn6929]

Just mail the skate board to your friend and say it's fragile xD

[@raidersrevenge9428]

It's so true tho

[@johannhung8579]

*Dear Editor For Braille Team Fix The Title To:Fetty Potter Tries To Mine A Obsidian Skateboard With A Iron Pickaxe*

[@Tysoncloud]

Give the money to Fetty he worked really hard

[@sebastiansaxon]

And probably got lung cancer from the smoke lol

[@DG-kd2gz]

Hahahahaha but he didnt complete the task

[@lancewink2313]

D G there’s fucking rebar in the board how is he gonna break that

[@DG-kd2gz]

@@lancewink2313 high stakes high reward ;)

[@cianmac3934]

@@sebastiansaxon I'm 3 min in and when I heard about the smoke I was like wtfffff

[@ironsight3218]

The series should be called you make it we break it

[@albr4]

that's pretty much what the "you make it we skate it" series was.

[@ironsight3218]

That’s what I was going for

[@KetansaCreatesArt]

In an uncivilized manner.

[@Phoenixblue.]

So U want people to make a skateboard that took them months to make just so some KZbinrs could keep it and skate it but instead break it? Now that's just fucked up dude. Edit:nvm that's all they been doing.

[@brailleskateboarding]

YES

[@albr4]

fetty breaks every board in the braille house trying to break a board

[@brailleskateboarding]

Hahaha. THIS.

[@OTONGABRIEL]

Alan Braaa lol

[@onawhimadventures7672]

Easiest way to win: drive to a hardware store and buy a hacksaw. Not a power tool and even though it's not ideal for cutting through that rubber gum shit you've got 30 mins. More than enough time with a hacksaw

[@solarbbx]

It says break. doesnt say CUT.

[@mr.techaky7655]

@@solarbbx They also mentioned a blow torch... Does melting something count as "breaking?"

[@alexcrowder1673]

FAK FAK FAK YES So if someone cuts your skateboard in half, you wouldn't consider that broken? Google the word "Break"

[@alexcrowder1673]

Mr.Techaky if someone melted your stuff, is it broken? Or is it still functional? Theres your answer

[@marley___9891]

9:30 *MISSION FAILED!WE’LL GET’EM NEXT TIME!”*

[@SeraphOfTheNine]

*starts to bend it* - Awesome! *flips and and straightens it with the next hit* - WHY wouldn't folding it in completely help make a stress point?

[@vivacenontroppo]

not exactly. you can brake metal just by bending it back and forth. don't you know that?

[@amp4105]

@@vivacenontroppo you can but it makes alot more sense to constantly stress one side, he just realigned the metal which inturn made it the same strength

[@kevinmoncada9036]

amp mmm nooooo.... the metal has already weekend. Even if straight again it won’t have the same strength.

[@13vatra]

@@amp4105 lol.. that's not how physics works.

[@ryanshinault5868]

It makes the metal weekee

[@faithlewis1661]

All of Fetty’s ex’s: Fetty broke my heart because Fetty breaks everything

[@brailleskateboarding]

Lol

[@orangejuli07]

Dude should have immediately drove out and bought some giant bolt cutters.. it's not a power tool. Easily pay for itself with the 10G

[@ShadowViking47]

That's exactly what I was thinking

[@pedronabais1456]

from what i saw in comments it is steel i never tried but i am not sure if a normal bolt cutter can cut steel

[@Fatso97]

@@pedronabais1456 We use bolt cutters to cut through cast titanium at work, cutting through rebar shouldn't be hard if he used the blowtorch to soften the metal. what he was doing was straight up dumb "Oh hurr durr i throw concrete at it and jump on it"

[@pedronabais1456]

@@Fatso97 okay my bad i nevber rly got deep into metalurgy

[@alexcrowder1673]

pedro nabais steel is literally exactly what bolt cutters are designed to cut lol.

[@idontknowwhattoputhere7622]

5:36 “I used the skateboard to destroy the skateboard”

[@markg8125]

Imagine a Nokia 3310 made of that material

[@Toxim]

Nokia 3310 is much stronger

[@dypirate7193]

Only a Nokia 3310 can defeat thanos

[@james6028]

now I wanna see a fetty vs linexed 3310

[@vinnieb3627]

Line X was made from Nokia 3310 parts

[@brianestrada1738]

You should've given fetty the 10k either way because he deserves it

[@brailleskateboarding]

Its true, he deserves the world!

[@MrLvngscrfc]

Uh no. Stinkin participation trophy generation. The only reason they offered so much was because it was so unlikely. Why don't you give him 10k if you feel so bad?

[@Not_So_Fireproof]

@@brailleskateboarding give him 10k monopoly money. and then hide $50 in his big shoe

[@MattIsLoling]

@@brailleskateboarding hahahaha "he deserves the world" basically their way of saying we dont all get what we deserve LOL

[@AnteyeSocial]

@@MrLvngscrfc who hurt you????

[@travisvencil4998]

Linex a lithe carbon fiber hybrid board. Remember fetty didn't chip one because it has the polymer around the ends. It would still actually be a practical board.

[@brailleskateboarding]

Oooooh!

[@jakesnakemate2929]

RIP concrete board

[@TheRealAlpha2]

It did was it was destined to do. o7

[@brailleskateboarding]

:'(

[@Hardin_Kheder]

9:24 me and the boys trying to find diomonds

[@FalsePeak_]

he needed to heat the rebar one by one to red hot with the torch instead of the lighter fluid then hit it with the flat edge of the pick axe

[@FalsePeak_]

@DeviouS yes but I don't know if they have liquid nitrogen or something like that around within 30 minutes that's why I figured we make the steel more pliable and then introduce shock with a sharp edge to take advantage of that increase in playability

[@krupert8355]

Actually, if you heat steel that has carbon in it to a reddish temperature, then quench it with a lot of cold water it will become tempered, just like they thought, brittle. The problem is that they probably didn't get the rebar hot enough, and didn't cool it down fast enough either. The problem though is that the metal will actually be really hard even though it's brittle, but at least it would have a chance to snap.

[@twentyoneHz]

kerosene isn’t hot enough to melt rebar; would’ve been better to heat up each rebar w the blow torch and break it

[@_t_f_]

Josh Kitch that’s what I was thinking... just use the blowtorch until the rebar is super hot

[@albr4]

fetty that blacksmith, heat it enough to bend it in half

[@poowhynot1268]

shoulda used jet fuel amiright but seriously as an actual blacksmith, can say he wouldnt have broken it lol there are rebar cutters that arent a power tool tho, so go.. rent one? yeah he could have gone down to the shops and rented one in half an hour, but yeah, the blow torch would take longer than 30mins to heat up the rebar, and to hit it with the pickaxe enough to cut it, its just propane, not even MAP gas

[@ajlendful]

the guy with that flawless poo name is right

[@brailleskateboarding]

Aha!

[@JamieClark]

How long until Fetty lights it on fire? I'm guessing under 10 minutes

[@B-RaDD]

Close

[@brailleskateboarding]

Lol 😬

[@calvincoolidge6306]

All hail fetty and his giant shoe

[@dizzod123]

willetwak lol 🙌

[@brailleskateboarding]

Hahaha

[@calvincoolidge6306]

Yaay

[@stinkyfungus]

Heat it to cherry red with propane torch, use gloves and bend it back and forth till it fatigues. Or if there is a iron workers hammer and a cold chisel around, heat to cherry and use the chisel to cut right through it. Steel turns into a noodle with heat.

[@JosePerez-lk5lr]

at one point i tough your channel was going to die but way to prove me wrong. well done for not giving up.

[@jsmit9063]

I wish I could tell him to just use the blow torch and forget the lighter fluid, good effort though, buddy

[@alexcrowder1673]

Jocelyn Robyn Yeah that was painful to watch.... I know not everyone is tool savvy, but goddamn.... Anyone with working eyeballs should be able to tell that literally any torch is burning hotter than lighter fluid. What is this? his 1st time seeing fire?

[@deleted5879]

Linex glass skateboard? Edit: thanks for the likes. Like if you agree they should do this

[@alamcho]

glass would break (or melt) since linex is applied with heat

[@deleted5879]

@@alamcho its still very possible

[@deleted5879]

@@alamcho how hot is linex applied?

[@NewAgeRedBoy]

the glass definitely isn’t going to melt

[@lukeberube6990]

deleted Linex is heated to around 150-160 at the machine and after the isocyanate and resin mix it bumps to 220-240

[@yumisayama4110]

Well, if you wanna break ANYTHING just give it to Fetty. Easy lol #NotificationSquad

[@brailleskateboarding]

100%!

[@The416ification]

im thinking that the best way to approach destroying this deck, would be with some liquid nitrogen and a 2 pound sledge hammer. cold steel gets brittle and should crack or possibly shatter depending on how much nitrogen you use and how you choose to apply it. ps been a big fan of the series for the past 2 year; this channel(mainly you make it we skate it) honestly got me back into skateboarding. It compelled me to build some ramps and buy a new deck and build a few contraptions of my own thank you all so much

[@mobboikoori6501]

15:47 love how he decides to just set on fire again 😂

[@themole9898]

You should've atleast gave him a consolation prize of like $500 or something

[@baatzi5111]

Nobody: Skater dudes on KZbin: ''oH wOw''

[@MatthewL02]

That thumbnail tho

[@brailleskateboarding]

Its fire 😂

[@MatthewL02]

Ayyy, u guys are the best! 😂💪

[@helloitsmargo]

lmao im still not over carlos saying "ill go get the broom" what a dad HAHA much love

[@ѕтявяяєѕ]

he actually won this challenge, the description says he must break the board, not snap it in half, he put numerous holes in it, burn a hole right through the middle, the board was certainly broken.

[@Johnny_official_18]

This guy would bend the skateboard over and over and would put it back in place every time

[@Cragdognamedbear]

Haven't you heard? Jet fuel can't melt steel beams.

[@johnyvare]

LOL, thermite works faster. like during 911

[@craigbratty5453]

Just give the government a call they will let u use what they didn't need. Ha.

[@kyushka.]

U know a guy named Owen Kruger

[@melted7136]

13:27 HEY THAT'S MY NAME

[@xX12VincEXx]

xD

[@anthonyestrada121]

PLEASE MAKE THIS A SERIES!!! Ill learn to hardflip if you do!! :)

[@steveart2394]

I subscribed to the channel originally to watch people do stupid stuff, but now all I want is watch Fetty destroy everything. I am not disappointed. Thank you.

[@SquirrelASMR]

6:00 is it gonna be bad if those pipes got broke? 😂

[@TsukiRaiki]

i want to see this vs the giant dart guys....

[@Jason-jh9uv]

Lighter fluid doesn’t melt steel beams ahhhhm I mean rebar

[@Mr.Serious.s]

He has a lot of will and dedication

[@pizza_rat2288]

“Mom I need a new skate board” Mom: oH iTs FiNe ThAt bOaRd LoOkS fInE iTs bEtTeR tHeN nOtHiNg

[@stevenyoon7737]

please don't ever give Fetty liquid nitrogen LOL

[@viggonorgren548]

Wow! imagine if apples produkts where made out of that material

[@gracecochran4430]

I think it weighs alot they may have been joking ofc I can never tell

[@jameshite4820]

I’m a pretty resourceful guy I could have found a way to break or cut that rebar but there NO CHANCE I’d be able to kick flip that monster!!!

[@plushwuff]

*THATS SOME SERIOUS DAMAGE*

[@benjaminmuusmarcussen1618]

if you cool down hot metal quickly with water it just becomes even harder because the hot metal will harden due to the cold getting in to the metals elemental core and then react with the changing environment

[@mikehall4730]

It would have been hilarious if it broke when Aaron dropped it in the outro.

[@brailleskateboarding]

Hahahahahaha

[@mikehall4730]

@@brailleskateboarding time to edit the outro

[@RaidenBlvck]

Damn hes getting hella mats

[@-NME]

His idea of bending it at the 3-stairs was probaly the best, if he would've kept that up back in forth he could break it.

[@calebwd03]

nah if he heated each bar up with the blow torch until red hot, he could have used to pickaxe to cut the bar like he is forging,that would have been the best way

[@simondowning1741]

You guys should do a video on how long it takes the razor whip a skateboard pull up behind the car and all sorts of stuff

[@JordNEdwardz]

Yay! Braille is finally following the trends of KZbin. This is how u excel faster! Nice video

[@andreashafjall9972]

Idk why but I thought of *flex seal* as soon as I saw the skateboard...

[@kieranmurray510]

Couldn’t he have just used a hacksaw?

[@NixiShavalMusic]

What about no power tools do you not understand

[@kieranmurray510]

wolakking TM - Believe it or not.... a hacksaw isn’t a power tool..... its a handheld saw for cutting metal (in this case, could have been used for the rebar)

[@NixiShavalMusic]

@@kieranmurray510 fuck u right

[@BrickMation_Ben]

Aaron: $10,000 lf you win Fetty: we have a *skateboard* to burn

[@martinsvilands7334]

There was a way other than blowtorch. Use a CO2 fire extinguisher after shredding the insulating stuff off to cool down the rebar. at -60°C most types of steel get brittle so a tap of the pickaxe would be enough. just has to make sure it's cold enough.

[@x9x9x9x9x9]

For future reference the welds might break first. OR use the torch to get the steel glowing then use the pick axe.

[@Milko-xk5wt]

SO there wasnt any metal saw in BH?

[@brailleskateboarding]

Hmmm good question!

[@gellatiplays9075]

No power tools

[@-exillion-4307]

@@gellatiplays9075 metal saw isn't a power tool fucking Einstein over here

[@M8ImRekt]

@@-exillion-4307 That was the fucking comeback of the year LOL.

[@stinkyfungus]

@@gellatiplays9075 Uhh... ever use an old school metal workers hacksaw? Will eat right through mild steel rebar. You know we used to make shit out of steel before we had power tools... right?

[@thaman3454]

Hes trying to mine obsidian with a stone pickaxe

[@HailSatanFuckGod666]

CosmicTV lmfaoooi

[@connorhenderson2943]

Hacksaw: wassup my dudes

[@seanmacgurn2623]

When you heat steel (what rebar is made of) up then quickly cool it with water it hardens the metal, making it harder to break. I don’t think anyone realizes that.

[@NoName-zf9kf]

fetty trying to break that skate board with the pickaxe looked like me trying to break bedrock when I was a kid

[@kieroncraig3594]

as an Architecture student i will be very surprised if you break rebar

[@Dannerrrr]

kzbin.info/www/bejne/oIO7p3iJrNaso80

[@JacobTennis1999]

this actual primate decided to use concrete blocks and his leg in order to break through it last vid i watch lol

[@tophatvideosinc.5858]

I have an acetylene torch, I'll break it and take that 10k. Not even a power tool, just gas

[@mr.techaky7655]

And to make it even more simple, good quality sharp axe, bolt cutters, and a bench vice. Ez mode! All of which are all hand tools!

[@abc-uj3hg]

As blacksmith i can tell you that black metal snaps like paper if you keep twisting/bending to the opposite side/way after getting the fully bend on one way

[@dessertlimbo]

Dont need to be a blacksmith to know that i used to bend little bars with my hands and after i bent them and went back it opened like your broke a hard breadstick apart but its pretty hot near the break

[@lilmarshin8208]

Line x: you can't break this Fetty: hold my beer

[@Frank-ld4qi]

that ain't nothing looking at the 40$ pennyboard

[@cianmac3934]

That's class, I got the same shoes at Fetty. I feel like a skater now

[@dylanbenadie458]

U from ireland?

[@Kc_Fp]

He should have put it on the train tracks 😂

[@gabetinebra4866]

Trying to break my skateboard gone wrong(ON THE RUN FROM THE COPS) (thumbnail)"😲😢" Mix of both

[@rosekiller4004]

5:42 - 6:16 LOL I thought those glass sounds were edited in 😂

[@lilith9687]

Watching this skateboard getting so brutally hit again and again is making my back heart for some reason...