Quick Start with Arduino - for Beginners

[@nisarmohammed97]

Of all the arduino introduction videos I have looked at, this has to be the best one I've seen. Thanks a lot

[@jacknelson6006]

This is the best beginner tutorial I’ve found. It’s right into the fun part without long, boring, and usually useless information. Thank you

[@bayoupirate3808]

Excellent introduction to Arduino. Thanks

[@AlanJames1987]

Why are you using a 330 Ohm resistor at 2:29? I 'm just starting to learn so I could be wrong but doesn't a white LED have a forward voltage of 3.5v and consume 20mA and the Uno outputs 5v? So, if the voltage difference is 1.5v (5v Uno - 3.5v LED) and you divide that by 0.02 (20mA of the LED) you get a resistance needed of 75 Ohms. Before posting my above comment I looked up the lowest voltage and amperage I could find for an LED. It was always red and it needed 1.7v at 10mAs. So 5v - 1.7v = 3.3v. 3.3v * 10mAs = 330 Ohms. So 330 Ohms the the maximum resistance ever needed for this circuit.

[@HaxGuru]

The best video for beginners on KZbin !

[@lordtyrion007]

Did people seriously downvote this video? like wtf! this an awesome educational video.

[@sreejithshankark2012]

Thanks lot my friend... My first adruino program....I learned by you

[@PakiNewsNetwork]

Best video for arduino beginners.

[@aarifnadindla1197]

there is no drop down list in my port option ,can u please find a solution to it

[@thejaywalkingant5910]

Does the arduino Ide come with a compiler or is it just a text editor. What programming language does it use?

[@BrainergiserTube]

It's with compiler. Programing laguage is C

[@Rookblunder]

How do you stop it from blinking afterwards

[@dropdoo]

File > New > then click upload directly. just upload an empty file

[@InventionTherapy]

What is the best Arduino to start learning on?

[@asankaromani8147]

Arduino uno

[@JaquaviosDingles]

why did you need the resistor

[@BrainergiserTube]

To control the current through the LED. There are 20mALED, 5 mA LED..

[@sirbloxy007]

Thx bro ... Cause of you I accepted to competition

[@sirbloxy007]

Wth

[@sirbloxy007]

You're always online?

[@sirbloxy007]

Can I get love

[@sirbloxy007]

Thx

[@adityapawar1710]

Bhaiya I want to make a cooler with ultrasonic sensor so that when I come in front of it it will be on

[@BrainergiserTube]

Great

[@adityapawar1710]

Please I don't no how to program Arduino but I had knowledge about brushless moter transmitter receiver and I can make RC cars RC planes I want to learn about arduino

[@BrainergiserTube]

@@adityapawar1710 I have more arduino projects. You can go through those videos.

[@BluelightGaming1]

What woukd happen if you didn't add the resistor before the led? Would it still work but be brighter or would it blow?

[@dropdoo]

Just did that, thing is so bright can`t look into it

[@scalykitten7565]

2:24 I don’t think we can uptoad something...

[@aidanvega9778]

i think thats like updog

[@brandonromero421]

@@aidanvega9778 wHatS uPdog?? Don’t actually say it.

[@allenjoshua7692]

can someone tell my did he need a resistor on the negative side? I dont understand why... cant he just plug it directly?

[@BrainergiserTube]

any side you can connect the resistor.

[@techmad2808]

I have a doubt in blender I edited upto text now I were should I save it and title name is wrong

[@raghudev56]

may i use there white led with same register

[@YashChavanYC]

What video editor do you use?

[@stevenlee1726]

Hello, i have a lipo battery 11.1V 3300mAh 30c. I wonder if it can be straight connected to Vin pin of arduino? I am afraid that it will burn my arduino pin by high current suddenly flow into Vin. Urgent, please reply. Thank you.

[@stevenlee1726]

Then do you have any idea how to connect lipo battery 11,1V to arduino? Cause Vin is range from 7V-12V. I have seen some people connect it. Hmmmm, still a little bit worrying. Dont want to blow up my only arduino

[@yousafkhan525]

Were do you start learning audrino ,I mean is there any website to learn the basics

[@BrainergiserTube]

This is the video which will help you to start. Or you can see the KZbin channel named wekids. There are 4 videos. Easy to start. .

[@BrainergiserTube]

kzbin.info/door/4eQ7higlIly3a7OQiP5H_w

[@yousafkhan525]

@@BrainergiserTube THANKS

[@paraj2742]

So Cool I learn lot's of things thanks bro keep it up......................

[@rajeshkumar-sx3gl]

avrdude: ser_open(): can't set com-state for "\\.\COM9" got this error, please help. Thank you.

[@technovan1133]

it seen like your board gone you need a new one!

[@gamerchannelyt9188]

Very helpful

[@BrainergiserTube]

Thanks

[@jerryjon6679]

My Arduino board bling red light at "ON", green light at "L" is this normal?

[@dropdoo]

All good. if you see smoke then problem

[@danialmuhamad7167]

how do you determine the value of resistor?

[@wurstofall]

They are color coded using varying striped patterns. Check online you'll find it.

[@danialmuhamad7167]

Thanks for the reply sir. Sorry for not being clear in my previous question. Actually my question is, how to determine the 330ohm resistor is the right pair for the LED. For example, if i have a buzzer that is attached as the output of an arduino. How am i supposed to know the right value of resistor that need to be pair with the buzzer. Is there any calculations for it?

[@eicworld6848]

@@danialmuhamad7167 it depends on the power supply that you are giving to your led.if it exceeds the current and voltage rating of your Led then you have to use a resistor,so that you can limit the excess current.For example an LED with forward voltage drop of 2V and current rating of 20mA while if my supply voltage is around 9V then the resistor that required is R=(9V-2V)/20mA that gives me 350ohms.

[@h1ddenprogamer270]

Whatdoes this led ?

[@thenetheritechocolatebar8035]

Thank you for your help 👍

[@mohitpanjabi1620]

Very very nice video sir but i want to ask you that from where we can know this commands?

[@ElectroMentor]

Perfect 👍

[@sitarammahato9574]

sir i dont have laptop or pc can i do coding with android phone

[@eicworld6848]

yes you can download ArduinoDroid from playstore and use it for programming arduino ,but it is a bit difficult to type.

[@burhansancakl351]

1:09 thought that was a spark rip lol

[@JaquaviosDingles]

you never wrote which one was the input

[@iamdinesh8834]

How to write program?....

[@FartGaming]

Hey, could u make some kind of a simple line follower?

[@FartGaming]

hmm, id prefer small and easy to build. i dont have anything special in mind

[@subhashnair8115]

what happens if i don't use a resistor

[@anishkapse1894]

it will overheat and stop working, dummy

[@zLightc]

The LED will cause heat and it can't work this is why it's called a "resistor"

[@kumarraj4862]

Can i not work without pc

[@sadaneotmane1437]

You are amaaaaaaaaaaaaaaaaaaaaaaaaazing greaaat job. you have all my respect, this my first arduino project.

[@tiffaniepearson7508]

Thank you thank you thank you

[@phuketexplorer]

Everything the Arduino enthusiast needs can be found on the Banggood website, here: www.banggood.com/search/arduino.html?p=JQ26191551677201504Z

[@biplabghosh4219]

Can I connect led direct without Resistor

[@MarleeParanormal]

Not using a resistor can blow the LED. You need a resistor to prevent too much power from going to the LED (or any other conponent that has less capacity than the power source) The commenf is 6 months old so you might already know this. Maybe this explanation will help someone who might have the same question though.

[@harshrastogi1996]

I want to see next videos of it

[@cosif3001]

in which language u r write code

[@BrainergiserTube]

c

[@cosif3001]

@@BrainergiserTube 😲😲😲🤔😙😙thank u so much for instant reply

[@shilpab.b533]

Can I know more about Arduino

[@anthonybelcher8569]

Awesome

[@brain-circuit3900]

sir can u plss make a homemade remote by PCB board and switch which can control 4-5 motors ...for me please ...

[@brain-circuit3900]

+Brainergiser (Brainergizer) no sir.. normal remote control circuit base. rc car circuit can control 2 motor but I need to control 4-5 motor for my next project ..:)

[@brain-circuit3900]

+Brainergiser (Brainergizer) yes sir ..I saw that ..but I was talking about normal circuit bote where I can control 4 motor by tip switches .. connected to PCB board ..

[@brain-circuit3900]

+Sina Sarwar and it will not be wireless .. it will run by wire like a cheap rc car which r not wireless ..

[@brain-circuit3900]

+Brainergiser (Brainergizer) yes sir ..ryt .. but each motor should have front and back rotation .. so may b there will b 8 buttons ..

[@brain-circuit3900]

+Brainergiser (Brainergizer) thanks sir.. I always take u as my roll model ..

[@OfficialDomx]

why did my uncle come in my room and randomly give me this and said here’s an early bday present 😭

[@frippster]

Why are you crying tho?the thing’s awesome!

[@OfficialDomx]

@@frippster I wasn’t crying I just had no clue what it was

[@satan4943]

Coolest uncle

[@aspboss1973]

sir can you make video of making a robot using arduino?

[@aspboss1973]

+Brainergiser (Brainergizer) thank you,otherwise good video

[@shafikahmed6889]

how to connect rgb strip with this arduino

[@iamgoated6483]

not enough power bro

[@bipulray1905]

how to write code???

[@__jonko_with_johnko__]

use a keyboard

[@InnovateYourselfashu]

YOUR VIDEO IS AWESOME . I ALSO HAVE UPLOADED SOME VIDEOS ON arduino CHECKOUT THEM ON THE GIVEN LINK i hope you will like them: kzbin.infoVIDEOS

[@Patrickzestar]

A_RaNdOmScRaPBOT 😂😂😂😂

[@abhi-wq8xz]

Exactly what I was going to write

[@ashabohara3632]

How to reset the arduino uno

[@ashabohara3632]

No I want to reset codes that are compiled in board

[@MrLucifuge1973]

Just erase the board or click on new

[@usmanabdullah7300]

VARY GOOD

[@Habib-Daood-Rathore]

Hello Guys Can anybody tell me from where i can download Arduino software? Regards Habib

[@leoterss]

Maybe google "Arduino IDE"?

[@micahclancy9855]

The link in the description

[@p0intblank597]

no need of PC I use Arduinodroid the most trusted Android software for uploading a program on aurdino

[@ShakeelAhmad-cg4il]

Arduino IDE link Thank you.

[@Otto_Heiskanen]

he added it

[@bhaveshkhot3759]

thanks it really work

[@ramakumarr4630]

now into firmware also g8

[@jarelt7006]

2:52 hahahaha, this video is very helpful tough, its simple

[@parth5372]

the spelling of the title is wrong

[@brain-circuit3900]

+Brainergiser (Brainergizer) spelling doesn't matter ... if ur understanding is ok...

[@p0intblank597]

thnx sir

[@lmao-zo5kz]

Soe ie

[@josephmazzulla646]

music is distracting

[@jskuwait05]

thanks work fine

[@HappySlappyFace]

raspberry please!

[@HappySlappyFace]

radpberry pi tut pleasr

[@HappySlappyFace]

***** YAY

[@HappySlappyFace]

its easy buy one... download the os you want... then write it to an sd card... and power it up... thats the setup... but the coding... will take your brain to Raspberry makers... So You Neven Be A Stupid in Programming

[@KamleshKumar-us7sm]

You fool pin 13 has resistor in it already so to pin led directly

[@BrainergiserTube]

before abusing learn electronics

[@aarifnadindla1197]

there is no drop down list in my port option ,can u please find a solution to it

[@BrainergiserTube]

Go to device manager and check it COM port is detected or not.

[@aarifnadindla1197]

@@BrainergiserTube thank you,it's fixed

[@BrainergiserTube]

@@aarifnadindla1197 great