Breaking in a Catcher's Baseball Mitt

[@wilsonballgloves]

We’re glad you love it! Thanks for being a member of Team Wilson!

[@wilsonballgloves]

We do not have a “Breaking In a Third Baseman Glove” video for this year. We recommend checking out our “Breaking in a Middle Infield Baseball Glove” video and skipping the steps that will form a shallow pocket (pulling the glove from the thumb and pinky).

[@NCScratcherCouple]

I remember when Tim Federovich was playing at UNC, we saw him play in a lot of games over his college career bc it's about 30mins from my house, and a few of my friends that I played with as a kid were playing at UNC too.. Out of all the players we watched over those 4yrs, he is one of the last people I thought would make it to the show.. Happy for him, and he's definitely picked a great glove.. Love my A2000's

[@wilsonballgloves]

Hi Bryan, this stain is from the substance that separates the leather forming the pocket of the mitt and the leather forming the palm liner. The stain can develop over time as the leather gets broken in, but it does not hurt the mitt's performance nor the leather’s durability.

[@wilsonballgloves]

We recommend taking your glove to a local glove shop and asking them to relace your mitt this way, or check out the A2000 MN25 the next time you’re ready for a new glove. It comes laced the same way that Mike Napoli has his game glove.

[@jimlahey2461]

No other gloves have that loud explosion of a pop that the a2000 has. All my pitchers love it when I catch for them as that pop gives them that confidence of a good hard fastball.

[@bryanrmcnair01]

It's not the mitt...it the way ya let the ball hit and naturlay close hand instead of tryn "time" closing hand around ball as it hits it! Some catchers never get that "pop" with any mitt! They probably close thier thumb instead of "cupping" ball with the others minus the index!

[@akaredcrossbow]

ALL STAR has one of the best pops you will ever hear.

[@wilsonballgloves]

We’re uploading our “Breaking in an Outfielder Baseball Glove” video tomorrow!

[@wilsonballgloves]

Hi Jason, we recommend the A1K Catcher’s Mitt. The pattern is modified so that it fits smaller hands a little better. Our thought is that if you have a glove that fits your hand better, it will allow you to locate the ball more quickly which should help with transfer time.

[@wilsonballgloves]

The MN25 will only available on our Custom Glove Shop for the next year. You can find all of our 2013 gloves on our website now - the MN25 was the new Baseball Catcher’s Mitt released for 2013.

[@wilsonballgloves]

Our top glove guru Aso and other Wilson ball glove technicians work with pros and respond to their feedback year after year to make the ultimate catcher's mitts. Our Pro Stock leather sets us apart and a Dri-Lex wrist lining helps move moisture away from your skin to keep you cool and comfortable through every inning. We recommend trying one of our mitts on in a sporting goods store.

[@mattcarloto6967]

Thanks very much. I have the 1796-B for third and it's the best glove i've ever used so I'm sure this one will be worth the wait!

[@wilsonballgloves]

Thank you for providing the video. We reviewed with our in-house experts, and they think you’ve done a great job breaking in your glove. The issue you’re experiencing is common. We suggest pounding your glove with a neoprene weight in the impacted area to help smooth out the leather.

[@wilsonballgloves]

Hello, we recommend letting your glove naturally dry. If you try to speed up the drying process with a heat source like a microwave or oven you will make the laces weaker and your glove, especially the laces, will have an increased chance of breaking. Leave your glove in an area where it can breathe (i.e. not in a bag).

[@iJulSeHD]

just got my 2013 a2k pudge and it is soooooo amazing

[@wilsonballgloves]

We don’t have an official website that we recommend, but many retailers that we work with have the A2000 DP15 available.

[@wilsonballgloves]

We’ve got one coming out this week - only a few more days!

[@blakeduncan7059]

Aso always says like dis way 😂

[@JacobAlbertson2012]

Will you guys ever bring back the A2000 YBG now that Yasiel Puig is rockin' it? It looks nice!

[@bryanheavenisawesome]

Hi Wilson, I have a large dark stain in the palm of my catchers mitt and it works great as far as maintaining the shape of my mitt. I was just wondering what this substance was, it looks almost like pine tar and I've seen it on other models you've sold

[@baseballcards3]

If you guys do a video on tips to breaking in an infield glove, when will it be? I've commented a lot, my name is Sam, by the way. I got an A2000 1787-SS and I'm in love with it. It's great to be part of Team Wilson.

[@wilsonballgloves]

We do sell custom A2000s on our website, but we currently use dealers across the nation to sell our inline gloves. Once a year we create a pop-up store at College World Series. You should check it out next year - it's awesome!

[@therizbiz123]

Should I put 1 baseball in my catchers mitt or a softball in it as well. At the moment I have a softball and a baseball and not sure if it's the right thing to do.

[@wilsonballgloves]

therizbiz123 In order for your glove to maintain its shape, Aso recommends keeping an 11” softball in your mitt when you are not using it.

[@metfan157]

When will you be uploading a How to Break in a Third Basemans mitt?

[@TheJamesale]

I need a video for breaking in a first base mitt. Please.

[@bryanheavenisawesome]

Thanks wilson, keep up the good work!

[@tyman35193]

Why does my glove feel fat and like it doesnt have a pocket, and ive been using it for about a year now, is there a way to fix it?

[@noahnewman8264]

Hi Wilson, I was just wonder that when aso bends down the thumb on the catchers mitt what does he do with the fingers? Does he bend them and pound them down too?

[@mattcarloto6967]

I just got a new A2000 catchers mitt, and i am wondering if i should use a glove steamer to break it in faster. I play high school and travel ball so i want the glove to be broken in fast, but i'll take the time to use a traditional method if its better than the steamer. Please help.

[@jbcatcher28]

Do you recommend folding a catcher's mitt inside out to help stretch the leather?

[@TheDunkinDudez728]

I just got a Wilson a2000 Pudge. But whenever I close it to catch a ball, my pinky finger knuckle gets squeezed. How could I fix this?

[@wilsonballgloves]

That might happen in the beginning as you are breaking it in since the mitt is very stiff at first. As you break it in and the leather softens up and conforms to your hand, it should start to feel more comfortable.

[@wilsonballgloves]

This week! Stay tuned, we’re in the home stretch now.

[@BrwrFan806]

Can someone tell me why with the Pudge A2000 I got the ball shoots out of it when I go to close on a pitch? It like hits the glove and goes right out. Am I not using the right form? Idk...

[@wilsonballgloves]

Brewer Fan This could be due to the glove still being a little bit stiff. If that is the case you can try using the break in tips from Aso in this video kzbin.info/www/bejne/nWSni4aBZ859arM. Otherwise try focusing on catching the pitch more in the pocket, the ball will tend to pop out if you are letting it hit the palm or heel of your hand.

[@JSam21]

The Pudge (32.5") is the smallest pattern of the Wilson adult line. It might benefit you to look at a larger model like the 1790 (34") or the M1 (33.5"). Also you might have your pocket a bit too small. Work on receiving drills to help catch the ball in the same spot everytime.

[@eamasterd]

What size catcher mitt should a 11 year old be using.And what glove would you recommend

[@wilsonballgloves]

We recommend checking out the all new A1K catcher's mitt. The A1K CM is built to fit a smaller hand but still has a very high quality leather that breaks in fast but is still durable so it keeps its shape. www.wilson.com/en-us/baseball/gloves/catcher/a1k/bb4-cm-catchers-mitt/.

[@mariekekreuning4885]

Wilson Baseball / Softball I really lke how Aso prepares gloves and it will work fine with the more expensive gloves but I think it's quite important that you people at Wilson explain and stress that Aso's methods should not be used on the low end gloves.

[@wilsonballgloves]

Check out our video “Aso Breaks In Brandon Phillips Glove” to see the hot water technique he mentions here.

[@l5pchenk]

Is Aso going to be at the college World Series and would he be able to break in my glove? And if possible would he break in a Rawlings mitt

[@wilsonballgloves]

All About Baseball 22 No, Aso will not be attending the College World Series this year.

[@joemasi6543]

Hey Wilson would you recommend using the hot water method on a catchers mitt or no

[@wilsonballgloves]

We do not recommend using a steamer to break in your glove. Using a steamer can break the leather down faster and cut down on the gloves life span. It also Will void the 1 year limited warranty that we offer on our A2000’s and A2K’s. The methods described by Aso are what we recommend to break in your glove.

[@brendanbingaman8753]

Hey wilson ik its no a wilson glove but would it hurt the glove with hot water the glove is Rawlings player preferred p110v

[@wilsonballgloves]

Tim uses a Wilson A2000 1791.

[@brandonko7839]

will you upload a video on breaking in an outfield glove?

[@wilsonballgloves]

Have you tried using a weighted ball?

[@FlowResYT]

I am 16 in high school baseball. Whats a good catchers mitt that's good but not very expensive. Under 200$

[@wilsonballgloves]

FlowResYT The A1K CM 33" would be a good choice. This glove was developed with Top Shelf™ Leather and a Pro Style Pattern featuring a 2-piece web and an extra deep pocket for enhanced performance, this glove is designed to give you ultimate control. The A1K CM costs $189.95 and can be purchased here: @en-us/baseball/gloves/catcher/a1k/bb4-cm-catchers-mitt/.

[@JSam21]

The 1k leather will break down faster than the A2000 and the A2000 will break down faster than the A2K. Spend a little bit more money up front and get the pattern you like in either the A2000 or A2K and you won't have to buy another glove, if you take care of it properly, for the rest of your high school career.

[@allenshaver1121]

try a rawlings heritage

[@brittonross8379]

A1k or 44 pro fully custom for about 180

[@bryanrmcnair01]

Allstate pro advanced

[@gracieheinlein9672]

I'm 11 years old what size of catchers mitt should I get

[@wilsonballgloves]

Gracie Heinlein Hi Gracie, are you interested in our fastpitch or baseball catcher’s mitts?

[@comedymasters9690]

Do you know what's a good price for a Wilson catchers glove? I play for 11u baseball I would like to have a catcher glove all the way through college If I make it! My catcher glove know is so stiff and it's a mizuno please if you find a glove I would appreciate it Thanks!

[@yayman2627]

Is it possible to re shape a catchers mitt?

[@wilsonballgloves]

Hello, if a catcher's mitt is already broken in, it would be difficult to reshape. Is there something wrong with the way it was shaped the first time?

[@yayman2627]

Well it's kind of flat with a "v" shaped pocket i would like a U shape

[@GBSABaseball]

Another good tip...try not to store mitt in your equipment bag. Try to always carry it with you to keep it from getting smashed or losing its form.

[@ironchin79oi]

So do not boil water? Just plain old hot water from the tap?

[@Baseballbros1333]

hey wilson i play catcher and i use an easton natural elite is that a good glove or should i get a new and if so wich one

[@wilsonballgloves]

Many MLB and elite catcher’s choose Wilson catcher’s mitts because of our design and craftsmanship that we put into them. We recommend you try the A800BBCM34. It is game ready but still uses a high quality leather for durability.

[@graceann3479]

how should i shape my wilson a2000 pudge?

[@wilsonballgloves]

Grace Meadors The best way to break in your glove is to play catch with it or take a bunch of balls off of a pitching machine. To speed up the process, check out this video of Aso breaking in a Wilson catcher’s mitt: @watch?v=g3DZSK2iJ4Q

[@Yoshi-pe8fj]

I've been looking for tips for a while for my new Wilson A2000. I can't tell y'all how many times I've heard "Just play Catch" but I'm looking for answers like 'do I squeeze it like an outfield glove?' is a box or rounded form better?' or questions like that Can anyone help?

[@Sportsguy-rl8wj]

Yoshi just play around with it. Sit on it, squeeze it, catch with it and get the feel for it. Just do all of that over and over and it will break in

[@wilsonballgloves]

Yes, he’s breaking in the A2000 M1 in this video.

[@wilsonballgloves]

Yes! You can customize the A2000 MN25 without SuperSkin on WilsonCustomGloves [dot] com

[@daniellion4]

Hi Wilson, I've recently been looking to buy a catchers mitt, and I've seen many different brands. I'm wondering, what is it that makes Wilson ball gloves special?

[@tylerprock5901]

will there be a mike napoli glove for sale anywhere besides the custom glove shop? MN25. Or is there a set date of when new catchers gloves will come out for 2013?

[@wilsonballgloves]

Yes, it's OK. Make sure to let it dry naturally.

[@bikingwithben6789]

I have the same catchers mitt as tim

[@jesseweinberg4724]

hi wilson i just bought my first high end catchers mit and ive begun to break it in. its no where near ready but i can already see thats its breaking in in the pointed way that aso says not to. whats a quick way to make it the u shape like he says?

[@tylermurray847]

where could i buy the 1791 mitt like the one in the video that Tim is using?

[@smittywormenyeagermanjense4602]

Hey wilson, I know this sounds weird, but would it be bad to put something like beeswax on your glove to make it waterproof?

[@wilsonballgloves]

We do not recommend putting beeswax on your glove. There are not too many products that you can use on a glove to make it waterproof while helping keep the durability of the leather. We recommend using our ProStock conditioner on a glove to treat it. If you are needing to have a glove that is water resistant we recommend using our SuperSkin series gloves. The SuperSkin is a little more water resistant than regular leather.

[@bbnoreaster15]

how do you lace the web like the Mike Napoli glove, sorta like bars

[@sportwinner123]

how do u do that thing with the hot water i dont want to mess it up thanks

[@adrion66]

I spit in my catchers mitt, would that be a bad thing?

[@jesseweinberg4724]

hi wilson, i have begun breaking in my a2403 pudge and im very close to being done. i now realize that my glove is becoming rounded instead of square like suggested. any suggestions for turning the glove the right way or am i doomed? thanks alot

[@megakb24fan]

Is it ok to pour hot water on the glove even if the glove is already somewhat broken in?

[@tylerprock5901]

What glove model and size does Tim Federowicz use?

[@adrion66]

Do you have to be a pro to have Aso break in your glove?

[@wilsonballgloves]

Hi AJ, Due to Aso's busy schedule he only has time to break gloves in for a handful of our MLB players.

[@tylermurray7177]

where can I buy the blond a2000 catchers mitt like tim had in the video? I want one for my birthday

[@melliyasi1881]

Hey im 13 years old and thinking on what name bran mitt i should get wilzon or rawlings

[@wilsonballgloves]

carlos munoz We recommend a Wilson glove. There are two things that really differentiate our products from the other glove companies - the materials and our Pro Stock patterns. Our gloves are made with Pro Stock Leather which is made exclusively for Wilson. It is the perfect ball glove leather and makes our gloves extremely durable and have a great break in. Aso has designed the Pro Stock Patterns with the input of pros over the last three decades, and they’re meticulously crafted by our best ball glove makers.

[@anthonydangeli1851]

Of course they would recommend wilson

[@urhomeboy1]

How long does the wilson pudge a2000 take to break in

[@ryanhyman4568]

how does a glove break in to fast

[@quaqcy4336]

lol idk

[@jacksonhannah1445]

@@quaqcy4336 only 7 years late lol.

[@quaqcy4336]

@@jacksonhannah1445 haha yeah

[@samhall508]

If it’s low quality and it breaks in immediately that’s what breaking in to fast is

[@scrumdiddle123]

If you break it in to fast you can ruin the glove leather and mold of the glove.

[@petermad7476]

thanks

[@wilsonballgloves]

Hi Jesse, can you please submit a picture of your mitt to us via a Message on our Facebook page? This will help us determine how the break in is progressing and if you should make any adjustments.

[@MrNick81795]

Wilson whats your offical site to buy gloves (Dp15) the one I most want.

[@mustangct1012]

What does Tim mean by loosinning up the glove

[@thesaiya8550]

I know I'm five years late, but to answer your question I dont know

[@user-xt2bu4er5h]

@@thesaiya8550 lmfaooo

[@daniellion4]

Hi Wilson,

[@poetias]

are there any mn25 mike napoli game model that doesnt have superskin?

[@cobracjlb2112]

I put my catchers mitt in water and it is heavy how do I fix it to make it lighter and more playable

[@cobracjlb2112]

Thank you I'm glad I waited to hear from you instead of putting my not in a microwave

[@4beachballer]

Why don't you sell gloves off your site?

[@DatDudePSJ]

Breaking in a Pitcher's glove please!!!

[@lernixwilliams2666]

I am getting a a2403 pudge catchers glove

[@noahnewman8264]

I'm getting a a1000superskin on amazon for like 50 bux.

[@gracieheinlein9672]

That's my sisters picture ya I'm interested

[@wilsonballgloves]

It's not a bad thing unless it's done excessively.

[@juicebox2224]

I have a mizuno pro