Brembo Big Brake Upgrade

Join this channel to get access to perks:
/ @davesworld2132
Contact me at www.g8brakes.com
Dave's World Discord Server / discord
Need CRUZE parts?: www.davescustomparts.com
KNN Air Intake System 16-19 CRUZE amzn.to/3U1cmqs
/ turbobayperformance
Ikon Spoiler Parts / tools
Ikon Spoiler amzn.to/3HLhtXX
6MM studs for spoiler amzn.to/3YBf09l
6mm nuts for studs amzn.to/3x8NRi6
fender washers amzn.to/3XiDbZ4
Black RTV Silicone amzn.to/3jQ00FF
Battery powered grinder amzn.to/3XnyzRk
Batter powered ratchet amzn.to/3HNGhyy
Batteries amzn.to/3jJEJ0m
Charger amzn.to/3DQovtl
Hole tap and die set amzn.to/3RM5Vbn
Tools
Spark Plug Gap Tool: amzn.to/3MhQyTT
Expensive Spark Plug Gap Tool: amzn.to/3GOKl0w
Firewall wire tool: amzn.to/37fVCd6
Dave's World build parts
NGK Spark Plugs: amzn.to/3y12LbS
GM Delco spark plugs: amzn.to/3xYTW2i
Turbo gasket with heat shield: amzn.to/3slHMx9
Link to the CRUZE IKON Spoiler: amzn.to/36d7VpC
Link to my KNN Air intake: amzn.to/3CDAkRF
Link to the 18" Enkei EV5 Wheels: amzn.to/366pUxQ
Link to gunmetal 18" versions: amzn.to/3vXAAK0
Link to Glow shift boost gauge : amzn.to/3Cxh7Be
T fitting You can use: amzn.to/3nIs0K2
vacuum hose I used: amzn.to/3IAEfjZ
Air fuel ratio gauge: amzn.to/3JFDRko
Fuse circuit add on : amzn.to/3uNcNf0
Universal gauge pod: amzn.to/3EiyRBc
Handy free car buying book! amzn.to/37Dr7Om
Brembo Big Brake Upgrade
Due to factors beyond my control, I cannot guarantee against the improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not David who is seen in this video.
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all products, I recommend testing the gauge before beginning the install process.
⚠ DISCLAIMER:
While I strive to make the information provided in this video as accurate as possible, I makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. I am not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@bernardaflores1720]

The car sounds sick, LOVE it. The brake bleeding and braking loose the line are great.

[@davesworld2132]

This thing was so cool to drive!

[@John-up7fq]

Now this is a great way to describe the difference in braking dystems... Well done my friend..liked, subscribed and will be buying....take care

[@davesworld2132]

Thank you I appreciate that.

[@bigdogchrisl]

Damn....that amazing sound. Like when Metallica plays with the Boston Philharmonic...just gorgeous.

[@jay_Jalapeno]

what are the rotors and pads from so i can get parts in the future after i buy a kit

[@quise9964]

How can I put a brembo kit on my 72 cutlass?

[@davesworld2132]

I can make a kit for it. I built a few for my Chevelle's in the past.

[@volumen__]

I have Camaro brembos can I also use Camaro rotors??

[@davesworld2132]

No only some of the Camaro parts fit

[@901_tray]

Question I have the Zl1 camaro 6piston fronts what would be different that I would have to do

[@davesworld2132]

You’re going to have to modify the steering knuckles for the calipers mount. If you do that you could never put your original calipers back on if you ever sell the car and decide to keep the brakes

[@V8von]

Do you sell big brake kits for the base model cars or some type of conversion for the v6 g8 or is it all the same??

[@davesworld2132]

Yes I have kits specifically for that. You can reach me at g8brakes.com

[@V8von]

@@davesworld2132 great im going to cantact you

[@DannyluxMx]

Just bought a Chevy ss breaks but I hear i have to drill the hub because I have to use bigger bolts but I see you don’t drill anything ANY RECOMMENDATIONS or part # of bolts you use 🙏🏻

[@davesworld2132]

I have everything in stock including bolts. Message me through my website

[@3212Dre]

Did you cut the dust shields on all 4 wheels?

[@davesworld2132]

Not required. Only mod needed is trim about 1/2”-3/4” lip off the rear dust shields.

[@usecom1]

What is the issue ; where no one has done a rear drum brake to disc conversion for the Gen 1 cruze ? I put Brembos on my front ,drilled disc and pads , desperately want to get rid of the rear drums

[@davesworld2132]

I have a set up for that. But I’ve been busy and haven’t added it to the site

[@usecom1]

For Gen 1?

[@usecom1]

Do you have a parts list?

[@davesworld2132]

@@usecom1 I have a kit I can put together. But with everything required it’s like $1,000 so I did t bother offering it.

[@usecom1]

I am guessing that included new hubs rotors calipers and pads ? OEM or aftermarket Brembo? I am just wanting rear disc not necessarily neck snapper racers

[@cmplilrere4792]

what’s up Dave’ World 🌎 I just subscribed to your channel I am your new subscriber my name is Ms Joy my nickname is mama Joy

[@davesworld2132]

Thank you I appreciate that very much.