Really nice job on both the build and the video. 😎👍
@BrianGossard3 жыл бұрын
Hey, if you guys would be interested in doing a collaboration, reach out to me. I have some ideas.
@oliverread51532 жыл бұрын
@@BrianGossard lol
@EliazerLopezNica Жыл бұрын
Where can I buy this DIY Guitar kits?
@MarkK013 ай бұрын
@stewmac it sure would be nice if you had a strat style kits for left handed people. This is my issue with guitar stores and kits. No one thinks about the left handed people like myself. I do not understand for the life of me why we are always excluded. And when we do find something is cost 200 - 300% more. It is really sickening.
@obi-twokenobi99143 ай бұрын
@@MarkK01solo music gear does some left handed kits, but I think most of them are sold out. Maybe you could try to contact them. I haven't tried their kits, but I've heard good things about them
@savoirfaire89792 жыл бұрын
You know you’re getting older when a suburban guy is playing 2000-era emo rock for his build demo. But seriously, this is the best video I have seen thus far in my research on Strat building over the last few months.
@BrianGossard2 жыл бұрын
It’s my song by the way, but yes 2000s emo rock.
@greggpospiel6292 жыл бұрын
You made that look easy. I am getting started into building with almost no woodworking experience, and this looks like a great first project to try to get started. I thought the soldering might be more complicated but you made that part look fairly easy too. Great job on the guitar and video.
@matthewf19793 жыл бұрын
Those Fender tuners have different length posts to eliminate the string tree. The longest posts go to the E & A, medium D & G and shortest B & E. Since you already installed the tree, it doesn’t really matter but for the looks.
@ryanmonteclaro46163 жыл бұрын
Your correct man
@bjstein42423 жыл бұрын
Its the first thing I noticed.. the staggered posts are great when used correctly.. String trees unless graphite cause issues..
@YooTooobJeff Жыл бұрын
There are no medium, there's 2 long and 4 short... They're called staggered tuners
@prelovedguitarsni14363 жыл бұрын
Please tell me you noticed the tuners s are installed wrongly, it is unbelievably noticable as they are staggered. The tallest go closest to the nut, shortest further away & when installed properly you don't need a string tree.
@humbertobereta23763 жыл бұрын
I saw that too, decided read first because someone should already reported and you did
@briank67893 жыл бұрын
I loudly gasped when I saw that!
@Dirge4july3 жыл бұрын
Lol wrongly he says. You mean wrong.
@prelovedguitarsni14363 жыл бұрын
@@Dirge4july no I mean wrongly, correct use of English.
@spankmonkeybeatz-82833 жыл бұрын
@Preloved Guitars NI lmao damnn💀
@leftymadrid3 жыл бұрын
Ah, wait a minute! What did I just watch! Boy, what a pleasure that was! Seriously, there are tons of videos out there. But the way this video was put together was just perfect. Narration so intelligent, so understandable. I mean the English used here Is so very unaffected by today's butchered language. I will also add, I found the voice tone so soothing to the ear. Apart from being a guitarist and loving Stratocaster guitars for their unique feel and tone, the last thing I thought I would be commenting on was on how far "the human touch" can make one aware that there still seem to be incredibly nice folks out there sharing their doings with others, AND in such a natural pleasant, simple (yet hard to find) way of communication. As for the Stratocaster build from StewMac, it looks like a perfect DIY to take up. I'm sure one can come up with something very playable, and comfortable to play. Oh, I totally agree on the up grade of the pickups. I'm sure your wonderful daughter will remember partaking in daddy's guitar DIY project in the future :-) because in the end, all the life long acquired loving memories are what we can take with us... Thank you sir, for the video in its self, and for the great tips on your DIY Stratocaster build, but most of all, for the "human touch" and legit english spoken here! :-) :-)
@BrianGossard3 жыл бұрын
Thank you for taking the time to say all of that. You sir, have made me glad I actually read the comments today! Really you made my day! Thank you.
@dustybeta40552 жыл бұрын
This is the kind of video I'd probably watch even if I wasn't interested in the subject matter. Real How It's Made vibe with the editing and narration.
@Dirge4july3 жыл бұрын
I’d like to note that you should not use a radius block to sand down frets. That’s to put a radius on a fret board without frets. To give the wood a radius. Use a flat level beam to level frets. Nice build!
@BrianGossard3 жыл бұрын
That is what the instructions say. How exactly would we sand them without one? If we used a flat block, we would throw the radius of the frets off completely.
@patheticpigeon76733 жыл бұрын
@@BrianGossard using a beam is a much better option, especially when dealing with a compound radius. Using a radius block on a 12-16 inch compound neck would make the frets closer to the body thinner and uneven towards the end since radius towards the body is flatter. A beam is just a better alternative since you naturally follow the radius of the frets when sanding back and forth from the nut to the body. This is much more accurately down with a long beam so that it always stays flat and even when sanding.
@ifensler2 жыл бұрын
I wouldn't listen to this advice. The frets are not supposed to be flat.
@closetjimi2 жыл бұрын
@@ifensler except it’s not flat. It’s like trying to hand sand a bump. The paper follows the curve of the bump. Whereas in this case an incorrect radius block will be useless but a straight beam will follow the radius of the fret naturally.
@EbonyPope Жыл бұрын
@@patheticpigeon7673 This am isn't a compound radius though so it doesn't really apply. And while you can use a leveling beam is never as accurate as a radius block since you might find the radius with the beam more or less but it really depends on how long you sand in the same spot. And since doing things by eye is never really accurate a radius block works yield much more precise results and maintain the radius. That's what it's there for
@JosePineda-jn8jk3 жыл бұрын
For that end-grain issue I have seen that before when the wood is sealed and then we go to sand it flat to apply the primer (or alternatively when the primer is on there and it is being sanded flat) if you burn back through down to the wood it creates an uneven color. The thing that I found that works is if you do notice those blotchy marks and they are unsealed while everything around it is sealed, some tung oil usually helps match the color. If that doesn’t work sometimes some reddish brown stain on there will also help to even it all out. One thing I have seen in the past that I also wanted to mention was sometimes glue bleeds through mahogany and it’s entirely possible that the glue is affecting the color and that’s why all of it looks uneven. Just some thoughts for future projects.
@pmkconsultant Жыл бұрын
Hey Brian. Thanks for this super helpful and very well-done video! I think you've convinced me to give this a shot!
@jimdoner34433 жыл бұрын
Nice job loved your swivel set up to paint it. Great utility with the neck pocket.looks and sounds great!!!
@BrianGossard3 жыл бұрын
Thanks! Great to see you again in the comments, Jim.
@miltonpomales5405 Жыл бұрын
I assembled an Ukulele kit from StewMac. This will be one of my future projects as long as they make it as leftie!!! Great job and explanation!!!
@LunchBXcrue10 ай бұрын
I can't wait to do this! I've owned so many guitars now over the years I couldn't name them all, lots of Les Pauls, a bunch of different ibanez (Ibanezes? Ibanezs? Ibanie if you would? Not sure what the plural for that would be). A few months ago I traded my ESP LTD EC1000 in the matte black finish (with gold hardware, damn matte black and gold look so good together) and picked up an Ibanez RDG61ALA in black with the rain forest colour, first time usng fishmans as well. I had only ever used EMGs before but its really cool how many different tones you can get, neck, bridge, neck and bridge, pull the knob for a second voicing for all those or flip a switch that turns off one coil in each humbucker. Also was the first guitar I've had with a 26.5 inch scale so its awesome for playing in C standard but lately I've been playing just as must clapton or hendrix as I have black dahlia murder or lamb of god so I really want a strat for that type of sound and building one sounds like it would be far more fun then just buying a squire classic or cheaper fender strat. Stewmac is definitely the kit I'd be going with but I think I'd be going black and gold again cause I loved that colour scheme. Get the gold bridge and gotta have some locking tuners. I love the gotoh locking tuners, once you've had a guitar where you just push the string through, clamp and cut regular machine heads feel laborious lol. Looks and sounds awesome, I also love that pickup guard too. Definitely be saving this video for when I go to build mine!
@JosePineda-jn8jk3 жыл бұрын
Also paint when the weather is moderate, 67-77 degrees is like the most ideal with minimal moisture.
@BrianGossard3 жыл бұрын
It was winter…
@JosePineda-jn8jk3 жыл бұрын
@@BrianGossard yeah all just ideas for future builds which I am excited to see! 🙂
@BrianGossard3 жыл бұрын
Thanks man!
@victorgigante53742 жыл бұрын
Now if only Maryland weather offered "minimal moisture" as an option.
@markmckenna3615 Жыл бұрын
Brian, great video with lots of great tips. Just ordered a StewMac Tele kit. Can't wait to get started.
@tomclementsmusic16543 жыл бұрын
Great video, wish I could finish a guitar like that. 2 things I noticed you B string tuner should where the A string tuner is. Also the radius gauges improved my playing across the fretboard once I used them to set my strats. Great demo at the end too btw! Really enjoyed this video
@rivers99572 жыл бұрын
Great jam at the end
@BrianGossard2 жыл бұрын
Thanks. Hey Jackie by My Indian Summer.
@corsisongs2 жыл бұрын
New subscriber, just found the channel. Inspired man!Fantastic narration and presentation and I was in it all the way through and when you hit that chord, I hit that subscribe and bell button. Cheers!
@JustinWoo Жыл бұрын
Big Jimmy Eat World vibes at the end there! Love it! Thanks for this great video!
@TheAciddragon0693 жыл бұрын
i know this is an older video but i hope you see this. for finishing end grain if you're using natural oil finishes the engrain will be darker and there really isn't anything you can do, but if using a stain sand the end grain 1or 2 grits higher
@MixingGBP Жыл бұрын
One trick is to sand the end grain with a much finer grit, say up to 400 or 600. Don’t skip a grit. This closes off more of the pores, therefore limiting the absorption and making the color more uniform. It works for me.
@daniellelacivita45873 жыл бұрын
I feel like this video is for experienced people in this field but you did go over everything very detailed and educationally I liked it very much
@KBryanWhite Жыл бұрын
Love the video. I was decluttering and found an old off brand strat copy made by a company named Bently. It has been sitting in a closet for 30 years but I took it apart years before i really even knew how to play. And the pick ups, jack and tremolo/bridge is missing. Recently, I have decided I want a strat, but i don't want to pay an arm and leg for it. So i was kicking around the idea of buying all new hardware and pick ups for the Bently, however after seeing this video, it maybe easier and more economical to go with this kit. It looks interesting and fun! Thanks!
@luisbasurto5853 жыл бұрын
what a video, gorgeous guitar
@Annunaki_0517 Жыл бұрын
Don’t worry about your expensive lenses. Spots, scratches even (believe it or not) cracks in the front element have a minimal effect on the final resolution of your images. Someone on the internet did a whole series of tests on this and only the final test with a severely damaged lens had a major effect on images. You can find the article if you search on something like “effects of lens imperfections on image quality” or something similar.
@tremendoshd23563 жыл бұрын
13:00 tuners are in wrong. The two tall ones are for the low e and a string so they re not at an extreme angle
@phililpb3 жыл бұрын
also as they are staggered tuners if they were put in correctly you may not need the string tree
@GUITARKITWORLD3 жыл бұрын
Woah! That Stratocaster ended up really beautiful, Brian! Very impressed how you built it.. or finished it rather! haha yeah I agree the Strat kit super easy to build perfect for first time builders. And oh! love the quality of your video man! You're very artistic in editing. Just wow!
@BrianGossard3 жыл бұрын
Thank you so much! That’s so cool. I’ll have to check out your channel.
@GUITARKITWORLD3 жыл бұрын
@@BrianGossard Welcome, Brian!
@JohnBrown-z2u3 жыл бұрын
I think I'd buy a Mexican Fender. They're really good. You're almost guaranteed a good neck and you probably won't have to do any end dressing, the bridge is probably better, I believe (though am not sure) they come with Tex Mex pickups, the cavity will be shielded, and it will have some resale value. And even though it will be poly, you don't have to paint it or saw on the headstock. But you obviously wanted to put it together yourself and that's cool, too.
@BrianGossard3 жыл бұрын
I have a Mexican tele and it’s still one of my absolute favorites. No argument.
@MixingGBP Жыл бұрын
Yeah building your own is a labor of love for sure.
@sydjamieson34942 жыл бұрын
I built the Offset Trem kit from StewMac, and I can say it is a good kit. The only things you might want to know going in is the routs are narrow and if you want to upgrade to full sized pots you will find it extremely tight. Same with upgrading the toggle switch. I also had to go with a very small cap, same problem. I'd buy the kit minus all the hardware if it was available that way, as I ended up replacing almost everything. Grover Minis just drop in so no issues there.
@3r1cratpool222 жыл бұрын
I wonder how the pickups sounds. There is one offset with p90 style.
@GilderGeek_Creations2 жыл бұрын
Awesome job on the build, and production of this video!
@jcspaziano3 жыл бұрын
Great video! Love the flow! that guitar came out great!
@ScootersGroove08013 жыл бұрын
Very informative. I want one!!!
@BernRappold Жыл бұрын
Nice guitar. Thanks!
@thomasgarner2921 Жыл бұрын
awesome video! mine arrives in a few days - one thing i saw in a stewmac video is to not spray outside if the temp is high/low. For example heating up the lacquer then spraying outside in the snow - That may be why you had issues with the initial coating. - either way amazing video and guitar looks awesome! thanks
@Zeal8083 жыл бұрын
Tex mex pickups are $99 I most places. $159 probably for the fully loaded pick guard. Awesome video!
@BrianGossard3 жыл бұрын
Thanks!
@Bozo_Lord3 жыл бұрын
Anyone else have a slight stroke when he installed the tuners (STAGGERED) in the wrong order 😦? Jokes aside I love this content !!! Keep up the great work man!
@BrianGossard3 жыл бұрын
What can I say. There’s always more to learn. I definitely messed that part up. Fixed it later. Thanks though for the encouragement!
@Bozo_Lord3 жыл бұрын
@@BrianGossard no problem man! I’m getting into building and saw this last night, glad to see there’s options! Like I said in the previous comment; please keep up the great content!
@BrianGossard3 жыл бұрын
Thanks! I will be doing more. I have a lot of irons in the fire so you may not see much from me right away. Don’t be alarmed if I’m quiet for a while. I have exciting projects in the works.
@JohnnyGuitar152 жыл бұрын
great video and editing skills my guy
@JohnnyGuitar152 жыл бұрын
also the guitar aint too bad either ;)
@charvelgaming2975 Жыл бұрын
That strat turned out very nice. Good job
@ChrisCovers783 жыл бұрын
Excellent job! Really enjoyed this video.
@jimdoner3443 Жыл бұрын
Just watched the video again Brian , your daughter helping sand and your dramatic lighting made me chuckle and smile, so how is the guitar a year later now, and did you ever put a name on the head stock ??? A year later update video short would be cool !!!
@pdbordelon3 жыл бұрын
Looks fantastic!
@mikestroud99692 жыл бұрын
Good video buddy. I would of done the same with buying those other pickups. Good job 😎👍👌💯🎸🎸✔️✔️
@robertsparks35843 жыл бұрын
I think it looked and sound really good.
@DON-sp8le3 жыл бұрын
I love your vids I remember the song called Rondo, still love it 😎
@PhpGtr Жыл бұрын
Gotta admit, that project came out damn fine.
@xraygaming35703 жыл бұрын
11.7k subscribers now amazing 🤩
@BrianGossard3 жыл бұрын
Thanks!
@alexglover57273 жыл бұрын
Great job on the guitar, if you’re spraying with nitro however make sure you have a proper filtered mask as it is very toxic, for safety I highly recommend getting proper PPE
@BrianGossard3 жыл бұрын
Fair enough. I did wear a respirator though.
@alexglover57273 жыл бұрын
@@BrianGossard Awesome
@danielcastillo122511 ай бұрын
Bravo Monsieur 👏🏽👏🏽👏🏽
@kirtdecker562617 күн бұрын
I would never spray in that cold of weather. Probably said in can to spray at temps above 65
@willland12433 жыл бұрын
I just watched your video and it was very nice and you made a great guitar. You made me want to try to do it the video wasn't to high tech or hard to watch.😃👌 You build a great looking and sounding instrument and I look forward to seeing your next video. Peace and Blessings to you.🙂👍
@335blues1 Жыл бұрын
Great tutorial...... I'm ready !!!!! Any way that a genuine Fender neck can be substituted for the StewMac neck provided with the kit ?
@matts58033 жыл бұрын
Very informal video, loved the Hey Jackie demo. Great pickup choice ;)
@BrianGossard3 жыл бұрын
How did you know the song?
@matts58033 жыл бұрын
@@BrianGossard Hours of listening to it, lol
@SHERIFF8311 Жыл бұрын
hello there i can see that you use the side to side vibrato when you play, not many people use it on electric guitar, i do too. greetings from Spain, nice guitar🙂
@bryantcochran5065 Жыл бұрын
I use finishing epoxy (Zpoxy) to pore fill. It never has blotchy finish areas because the pores are completely filled.
@paraviolence3 жыл бұрын
Thanks for the video. Im about to build a T style in the same color.
@Bloodray193 жыл бұрын
Although not completely professional, but overall a very nice build. I've seen people repairing guitars as their fulltime job and not making this nice of a job
@rizmum73 жыл бұрын
Very inspiring. Thanks for d content. Love from 🇧🇳
@turftone3 жыл бұрын
Do you plan on putting the tuning machines on in the correct order ?
@BrianGossard3 жыл бұрын
What order would you put them in?
@turftone3 жыл бұрын
Looks like there are different length posts...the low E and B string are taller, isn't this for proper nut pressure/angle it's more common with Sperzel machines but it helps with not having string trees on all strings. I just thought it looked weird one short one tall three short and another tall one...wondered if you'd even noticed or was my tv playing tricks on me...
@BrianGossard3 жыл бұрын
I just checked. I’ll be darned, you’re right! They’re staggered tuners and I didn’t even notice that. I might switch the order later. Works fine though. Thanks for the heads up.
@phayzyre10522 жыл бұрын
Excellent video and thanks for posting! I’m currently looking at Stewmacs Telecaster kit and will probably be buying it here in the coming weeks. Your video here was a big help and gave me some insight as to what to expect when building one of these. Only suggestion I would like to give you is when you are spraying these guitars with paint, lacquer or whatever PLEASE use a respirator! That stuff they put in aerosol cans is not good for you. ☠️
@richarde33782 жыл бұрын
This was very interesting and entertaining to watch. Great narration, too. Thanks!
@JPCustomGuitars2 жыл бұрын
Thank you I really enjoyed this
@seattleday96903 жыл бұрын
I want to get the Stewmac Tele kit. I have ideas on that one.
@michaelvanbuskirk88452 жыл бұрын
Spray painting in the snow? 😲
@ifensler2 жыл бұрын
You can steam those dents out of the wood with a warm wet rag and a soldering tool.
@gregorio46462 жыл бұрын
It's still early in the video, and I wonder if you will mention the neck pocket, and the inline pre drilled peg holes. These details are where the devil resides, lol.
@Andersrifbjerg3 жыл бұрын
Looks great man, personally i would throw in a mex trem for 20 dollars, and a graphtech nut, and maybe do some shielding if it needs it :)
@BrianGossard3 жыл бұрын
I totally agree on the shielding. When I’m recording I do this weird thing where I connect a pedal, take off my shoe and put my toe on the wire to ground the signal and that kills all the hum. I do that with all my guitars (the fender made ones too).
@davidcarlin38502 жыл бұрын
No copper tape inside the cavities for single coil hum cancelling ? Also stew Mac makes a special paint for shielding cavities
@camilocala113 жыл бұрын
Great job!
@BrianGossard3 жыл бұрын
Thanks!
@justletmepostthis27611 ай бұрын
I didn't see you adjust the length and height of the guitar bridge saddles. Did you do that?
@benlow463 жыл бұрын
you don't need a string tree with those tuners, they're staggered if you had installed them correctly, did you not realize the different heights?
@robertbaker54453 жыл бұрын
I was about to say the same thing!
@BrianGossard3 жыл бұрын
Yeah, you got me. I learned something new thanks to the comments section this time. What can I say? We’re always learning.
@RyanChenMusic3 жыл бұрын
Did you darken the fretboard? It looks darker than in the beginning of the video
@BrianGossard3 жыл бұрын
I always add a bit of fretboard oil. It nourishes the wood and also makes it appear darker.
@minkorrh Жыл бұрын
Make friends with the painter at your local autobody shop. I deliver parts and can get bodies done for about $30 if I use what's in the gun at the time, $50 if I pick a colour. I do the sand/prep/seal and hand it over. 2 coats of clear on top which is good to wetsand smooth.
@willisleonard21352 жыл бұрын
How the hell did you get a good paint job in cold weather? I never get paint to work in cold temps
@davehendricks70232 жыл бұрын
whoa you rocked that nut file way to much side to side that can cause problems later on.
@joshemartinez25773 жыл бұрын
Can you please, PLEASE make a video about soldering the electronics? I know nothing about it, and i want to change the cheap pickups i have
@tomclementsmusic16543 жыл бұрын
Check out Breja toneworks on youtube. Step by step. great examples
@BrianGossard3 жыл бұрын
I would but I’m not the authority. Breja tone works all the way.
@duckfluff3 жыл бұрын
woah the headstock looks exactly like the one on my hohner st special
@marcosulloa40193 жыл бұрын
Is it just me or The edge of the body of the unfinished guitar looks different to common Stratocaster? It looks less rounded like the edge of the Telecaster.
@BrianGossard3 жыл бұрын
Looks the same to me. I don’t know. I mostly just play it.
@dondeestasquenoteveo3 жыл бұрын
Please use a respirator when spraying lacquer.
@Jesus4Life78 Жыл бұрын
Hey Brian.Does this guitar really play ss good as a fender stratocaster
@MehmetMАй бұрын
You probably should use a respirator when spraying paint...even if you are outside.
@ICSVortex-DCS Жыл бұрын
Did you paint this guitar in winter ??
@surfcollector9 ай бұрын
So wait, warm the spray lacquer up and then take it outside in the snow??
@kurosuzu3 жыл бұрын
What's the song at the end?! Sounds amazing!!!
@BrianGossard3 жыл бұрын
Thanks! It’s actually my original song. It’s called Hey Jackie. Here’s a link: kzbin.info/www/bejne/bZjaaqSpqsarmpY
@apivovarov211 ай бұрын
how many hours is needed in average to accomplish this project ?
@buck74772 жыл бұрын
How’s the neck? I like a chunky beefy neck!
@randyoh91492 жыл бұрын
nice guitar
@GeorgiaRidgerunner3 жыл бұрын
This video is great I have one question though what was the purpose of the nintendo unit
@BrianGossard3 жыл бұрын
Well the NES guitar was just kind of an experiment. It was okay, but impractical so I sold it.
@GeorgiaRidgerunner3 жыл бұрын
@@BrianGossard oh it was actually made into a guitar . Damn I bet you had gamers giving you grief for months over that
@pushironpatrol3 жыл бұрын
The guitar looks sweet but the neck relief should be set before you start the setup. Doing it last throws everything else out
@tomclementsmusic16543 жыл бұрын
I've heard the neck should be straight before any fret levelling.
@BrianGossard3 жыл бұрын
It should be straight. Do not set relief before leveling.
@pushironpatrol3 жыл бұрын
Yeah it's should be straight before fret levelling but the relief should be set before you start the rest of the set up, not after as it will have an effect on your intonation and action
@mlagathomason25553 жыл бұрын
I'm trying to build a guitar, wondering if it is ok to use an acoustic guitar neck for en electric one?
@owdpotter3 жыл бұрын
I have a question you may be able to answer for me , I have a guitar kit to build a stratocaster look alike but I have run into a problem .The instructions tell me to ground the green wire but i have one white wire and two black wires which is the ground >> Thanks
@BrianGossard3 жыл бұрын
I'm not totally sure since I don't know what you're looking at specificaly. What I CAN say is that whatever is wired to the back of the pots should lead to the ground.
@ekisoderqvist Жыл бұрын
Very useful and nice video, thanks for making this! I know these comments must be full of people with all kinds of criticisms and opinions (guitarists 😂….) but shouldn’t you ideally do a truss rod adjustment before string height and intonation, as adjusting it would affect those things?
@Inspector-713 жыл бұрын
Nice color choice. I wouldn't be suprised if you ran into some drying issues spraying that thing outside during winter, usually a bit too cold
@BrianGossard3 жыл бұрын
It was winter. That was kind of the unfortunate reality. Sometimes stuff’s gotta get done.
@BrianGossard3 жыл бұрын
Thanks though!
@greggpospiel6292 жыл бұрын
Also a question; how long did it take to put together from start to finish?
@ryananthony48402 жыл бұрын
This would take me under 4 hours
@mikemccourt62252 жыл бұрын
Bravo
@idontgivea17693 жыл бұрын
I’m considering building my own strat. Only thing that leaves me in the dust is electronics. If i want a single humbucker and a single volume, do i only need a 500k pot and a 500k output jack (and the humbucker, of course)?
@HCrockt3 жыл бұрын
Try with a 0k output jack, otherwise you won‘t hear anything.
@JamesWalshBristolKids3 жыл бұрын
I would condition the neck with linseed oil once a year.
@Melchisedec813 жыл бұрын
Great video and suck a great narrow tube that’s so easy to understand and follow. Great storytelling!
@BrianGossard3 жыл бұрын
Thanks Chris!
@m.l.j.14053 жыл бұрын
can you please make a video about stewmacs LP-Style Electric Guitar kit
@BrianGossard3 жыл бұрын
I’ve thought about it, but I have a really nice Epiphone LP that I’ve had for many years and Upgraded. I’m not sure I can justify having another one.
@ericr73672 жыл бұрын
Good job, nice tone.👍 I love kits, you are only limited by your vision 🤩 and skill set. 😫🤣 For me, I'm partial to candy finishes and body sculpting. That 'hogany must be 8#+ I think. 🤔 But beautiful nonetheless. 👍
@kiwi57573 жыл бұрын
What is "sodder"? Solder?
@MixingGBP Жыл бұрын
I had no idea you could spray paint outside in the middle of winter😂.