My Hughes Equipment Service truck bed tour

[@billslocumb4226]

When I farmed in South Georgia years ago, I had a old farmer tell that the $30 John Deere wrench that I was buying had the exact same germination rate as the $7 K-Mart wrench....he was right too I really enjoy your videos I understand the plans change and smile everytime . POWER LADDER lol Merry Christmas

[@bendone1965]

You should add door switches to control your compartment lights, Open the door lights come on, Close the door and the lights go off. no dead batteries from leaving the lights on.

[@townsendliving9750]

Timers and momentary switches

[@austinkeatings1947]

Service trucks always get overlooked because you use them so much. A good service truck or bed is a must have

[@bdsgreg500]

You really do a great job explaining everything about whatever it is your doing at the time. Keep up the good work

[@BriansFarmingVideos]

Thanks for watching

[@kevins5092]

That truck looks great for an 04’. Take that bad boy to the local Walmart and have them buff out those headlights, will be like new when it’s done. Looks like that headache rack would be a great spot for more lights to work at night with

[@TheJimmybud]

That's a nice clean shop truck , get you a 2in square tubing and mount a vise to it that slides into the receiver !

[@jamesmoudy367]

Called them about a bed a few weeks ago. Super nice people out there. There prices on aluminum beds where cheaper then some suppliers steel beds!

[@BriansFarmingVideos]

Yeah they aren’t badly priced for what you get.

[@williamcraig1505]

Clean truck makes you happy . I use craftsman tools mainly but no name brands are fine as long as the job gets done

[@mikei2545]

I have a 2001 3500 Duramax that is a dually extended cab, 8 ft box. I installed an aluminum flatbed on it that I use for my lawn care business. The engine has all new injectors and the heads and block has been resurfaced as pretty much all 2001’s were. It is plated for 12,000 lbs which I have been over by at least 1000 lb’s, thank goodness for the duals. After having a diesel it would be real hard to go to a gas engine but $7000.00 for a diesel upgrade would be hard to swallow. That is a nice utility box you have Brian, just put a switch in that turns the lights off when you close the door.

[@woodhoundbug4697]

If you don't think your channels aren't good let me put it this way I'm a retired roofer and I enjoy your channels so very much thank you James T out of North Carolina

[@ericdevaere9726]

Brian, “customize” , flat wrenches/screw drivers, that hinged door, double walled? hook hanger/ pvc tube/ magnetic backed/bungeed across , then more sockets in drawer

[@timthompson5885]

I've never been too crazy about a service bed like that but iam pretty impressed with yours!

[@kevingordon7426]

Plus a flashlight typically has to be held. That can be a pain.

[@thomashickey1808]

You should look into getting a custom bumper made to match your bed. I believe there is a Amish family in west union Ohio that fabricates aluminum beds and tool boxes and such I'm sure they would make a bumper get it paint matched to your truck that would look great

[@kevenhiemie]

Beautiful truck. You can see it raised up and down in the video time lapse as you clean out the boxes. May I suggest a pair of one up Offroad's traction bars and a set of airless airbags. I also have a set of airless airbags on the front of my plow trucks and they make a world of difference. My dad years ago had a bumper that was built and sealed to be a compressor tank.

[@Tanks-Link]

Darling I did on my work bed was when I put my LED lights in everywhere I put pushbutton switches on the doors so that way when you open the door the lights automatically come on but when you shut the door they automatically turn off never forget them that way

[@Thomasfarmstn]

I see the Thomas Farms decal on the door. Thanks Brian.

[@smcox1991]

Such a good looking bed but they sure cost a lot. I went ahead and bought a used regular service bed and cut it down so I could still pull a gooseneck or fifth wheel trailer. Threw a couple 5 drawer craftsman toolboxes in it and it’s been the best thing ever. All said and done with paint and bed liner I think I’m in it for $1000. Always have people complementing it as well.

[@stanleywatson4563]

You need a switch like car door switch. Comes on when you oen bed door nd goes off when closed. Still have a manual switch in case you don't want it on.

[@firedtradesman]

Be curious to see a similar rundown on your new black truck when/if time permits. Thanks as always for sharing.

[@michaelhorne3456]

Sweet utility bed! Needs a POWER LADDER on the tailgate.

[@leeslife3977]

I'm just making a comment because I really love your videos and I really love to get a gift from y'all y'all have a good Christmas and a Happy New Year

[@scottmakurat5159]

I really like the way you have the truck box set up

[@jameslodge4258]

Chop chop Brian. Merry Christmas Brown's family. Brian and squishy are snip snip brothers.

[@kevingordon7426]

Very nice and practical. Do a walk around of your dads truck sometime. I like the diamond plate. Would be interesting to see it in depth.

[@briancathell9988]

Definitely one of my favorite channels to watch! I got an 06 duramax and have been wanting to do a flatbed conversion for a while now but could never find a design I like. I love the look of yours Brian

[@alexbartlett1135]

Now I would love a video on that gorgeous classic car in the background!!

[@BriansFarmingVideos]

Go back on the channel a couple years ago

[@jimbence3519]

The best feature about any brand of tool? Having it in the field when you need it!

[@trentst.romain6974]

Cole the Cornstar was twitching when this came out because of that drawer situation you had going on......lol. Really enjoy the content. YOu guys are my 5 year old sons favorite because of Gleaner. Keep up the great work.

[@rust1n0ut7060]

The best setup I have seen was on an oil rig truck. Those guys really use those trucks.

[@sammathews7891]

Like that bed for sure, set up to get moving again for sure

[@h2recoveryteam2]

I have to say. I am a die hard Ford guy. Yet I do like your truck bed for sure.

[@chicagoblair]

Weirdly, driving from Chicago to family on the East Coast of NC, I found myself in Chillicothe today, As you recommended, I didn’t stop by or stake out the farm, but coffee at Tim Hortons brought me a weird connection to you! Cheers, Have a very merry, Thanks for all you share.

[@BriansFarmingVideos]

Lol next time checkout seven mile smokehouse

[@williamwallacejr.]

Thanks for taking the time to bring us along and show what all you do. Hope ya’ll have a merry Christmas!

[@rmedlinnc]

Nice setup on the service bed. You're keeping her in good shape!

[@ridgerunner80]

Keep the inverter and get some work lights that you can put anywhere with magnets I love the ones harbor freight has

[@andrewsaunders8252]

Brian for blowing of combine fit a air amplifier to your jet , this will increase the volume by 17% works with a Coanda effect

[@charleswolf279]

Every once in a while it’s good to do a house cleaning whether it’s a shop, service truck or a tool box. Kinda like taking a shower after cleaning out a grain bin. Keep the ice coming!

[@nathanstanfill4117]

A lot of farmers in my area put flat beds on their pickups and mount tool boxes on top but I think your setup is much better.

[@gregktm8907]

My dad has a tool truck, my brother has a tool truck and my uncle has a tool truck, most of my tools are from Lowe’s, Home Depot and harbor freight. Only tool truck tools I have are gifts from my dad brother and uncle. Same boat as you. I use my tools to fix my junk and there is a 99.9% chance that tool will go missing before it wears out.

[@jasonmaurina8952]

Enjoy every video you posted.looking forward what you have planned for the winter months

[@thomasvogelgesang667]

Great video, nice truck box. I hope you iced you ba.. enough.

[@andythehomefarmcornwallfar28]

Love the "going to put some ice on my ...."comment as it made me laugh so much! I think all farm trucks look the same inside - mostly clear front seats and a tip zone in the back which has been cement mixered several times looking for stuff whilst using working words. Hope all your family have a great Christmas and an even better New Year

[@benadams9273]

I absolutely love your vids Brian! I look forward to watching yours more than anyone else's!

[@John-kr7iz]

Morning!

[@donangst9120]

Like ths truck bed.

[@johnmagill6392]

Gotta love the man store lol. Harbor freight tools is all I put in the toolbox for the side x side they will get the job done & if you loose one it doesn’t hurt so bad. Nice bed I didn’t realize it was aluminum that will last a lifetime.

[@mennoreuten1563]

Since we are living on a poststamp called the netherlands we are almost everywhere close to home or a dealership so there are not much farmers whit a service truck, anyways thanks for the video greetings from a Dutch dairyfarmer

[@adamceluch7337]

A service truck is a must on a farm

[@Pizza-km1wf]

Beautiful truck

[@wapitiheaven9103]

I like your class combine a lot you should make merchandise of it. That would be cool !!!!! So can we?

[@michaelrussell6661]

A couple of COOL CARS sitting in the background :D MERRY XMAS to all the Brown Family & ALL THE BEST FOR 2022

[@webbjoe1860]

Great service truck Brian

[@davidwilt3446]

I really like the way your truck is laid out

[@screedme]

I'd like to see a video about the cars your family has stashed around the farm. Especially the deuce. I had a '67 back in my day, so there is a soft spot in my heart for them. I love listening to your dad tell his stories. Reminds me of my grandfather, who was a small time farmer in Brown Co. I really enjoy this channel. Thanks and Merry Christmas to all of you.

[@harveystephens6115]

Nice box on your truck! I need one. Enjoy the channel! Merry Christmas to all! Remember the reason for the season!

[@waverly7681]

Nice box..... it is easier to live with yourself if you plant a $5 wrench and it does grow, compared to a $20 one...

[@erictrace]

Brian, thanks again for these years of entertainment and for sharing your views and hopes for the future. I enjoy both of your channels.

[@wesleychristman8023]

Nice utility bed

[@erickamekonapeper4007]

😏 When you interviewed the Man who makes your Bed he said the Beds are Aluminum and Stainless isolated from each other and isolated from the Truck Frame. 🤓 It’s important to isolated because of Galvanic Corrosion from dissimilar metals in contact. It’s actually something that we don’t hear about much in the details but it’s a huge factor for longevity and safety. 🤔 Lots of older trailers have fallen apart from Galvanic Corrosion before it was observed in the engineering. I work in the Marine Industry there’s lots of places on Boats that need watching because of Galvanic Corrosion. Just generalized information there’s more factors. 😊 God Bless you Guys! ❤️🇺🇸🖖🏼

[@trevnsarah]

Brian if u spec another one with an inverter I’m sure u should b wired up so that it comes on and off when u turn the key. U could probably even rewire the one u have to do that?

[@michaelsurratt9593]

Nice truck bed (nice truck too). Looks like a very efficient tool.

[@typeebs93]

The icon brand isn't crap, they are very good. My brother in law uses them in his diesel performance business. He loves them. He's used snap on and all the other big names and broken them all

[@kylemartin5805]

Good description. I appreciate your way of giving your review on things. You like what works well and gets the jib done efficiently and cost effectively. You're not just stuck on certain brands.

[@BriansFarmingVideos]

Except GM. I’m pretty partial to GM vehicles.

[@kylemartin5805]

@@BriansFarmingVideos haha ok. Well suit yourself on that. Guess I wouldn't share the same feelings there but that's no problem. 😃

[@jamesuehling2689]

Good looking hats

[@Michael2022]

That is an awesome setup for a work truck. Harbor Freight has some decent stuff that just works and gets the job done. I have a few things from them.

[@billpotmesil]

Like the air compressor! Very handy!

[@jimpinger6206]

Just wanted to say, I watch several farmtubers, and yours is the only one I listen to the opening music. Almost like a hype-up tune. I have no problem with Harbor Freight, bought many items from there. But those Icon tools still hit the pricey range for me.

[@mattyod73]

Hi Brian great video . Really nice well laid out truck

[@craigkoch5717]

That is a nice looking service truck bed I definitely like to have that or make one of those for when I have to go out and service trucks on the road

[@garyoakman6187]

Happy Holidays everyone.

[@scothazlett2630]

I haven't missed a video in 2 years. I seriously want a hat Brian!!!! Haha. Not like I'll stop watching even if I don't get one. Love the content Brian, especially considering I really don't live too far from y'all

[@banjobenson9348]

Good deal no snow and blowing stuff yet .

[@ronknight3826]

Thanks for all the Videos. Have a Merry Christmas!

[@Military-Museum-LP]

Very organized Brian.

[@kipjenkins7614]

Nice truck! Bed looks good

[@gabebruggeman8156]

That is a very nice bed and looks like it works great.

[@jpag8764]

I've broken both Kobalt and Craftsman 1/2 inch breaker bars but hydraulic floor jack might have been involved

[@billamick2338]

What you need to do with the box lights is to put them on and contact switch so they are only on when the door(s) are open. That way no more worrying about the lights running because someone forgot to turn off the lights when they close the doors.

[@rodneybrugger6771]

Impressive truck bed

[@Squirt321001]

What a truck that is.

[@chrisgossman6512]

I always enjoy when you post videos. Thanks for sharing. Happy subscriber 😀!

[@philplace5822]

Boy back 50 years ago when I was farming. I'd loved to have a truck like that.

[@darzo.]

Cool, man! Best regards from Vancouver Canada. 🇨🇦❤️🇺🇸

[@BriansFarmingVideos]

Thanks for watching

[@cordel15]

I really like hats!

[@brianwilliams2846]

Love the show. Watching 👀 from Florida

[@mundellsfamilyadventures8135]

hey Brian love the video, I seen my Mundell contracting sticker on the back compartment door, that clear piece can be peeled off it is only there to transport sticker from the backing to what you place it on.

[@BriansFarmingVideos]

I’ll fix it

[@coreyrobertson8350]

I like that truck... it's pretty clean...

[@deanreinke1148]

Nothing wrong with Harbor Freight tools on the farm! I like their socket sets and wrenches! Go ice your jewels 💎!

[@mcd5082]

Love the references and the transition about getting snipped! Hope you recover quickly! Thanks for the great videos

[@dans9083]

Nice truck bed👍🏻

[@jamessanders7209]

Hello and Merry Christmas from Southwest Georgia

[@keithpowell2786]

Great truck bed & awesome job organizing it , hope you are back to a 100% shortly

[@stuartlaing4544]

Morning from Tuesday Morning in Auckland NZ

[@BriansFarmingVideos]

Hello

[@wapitiheaven9103]

Hey hope you and your family had a good Christmas ⛄🎄.

[@tomcleghorn4005]

Nice truck!! And I’ve never seen ( till yours ) a Hughes body Thanks for the tour

[@johnbucklerfarms]

Hope you feel better today!

[@HootMaRoot]

If you thought your truck was bad, you should have seen what Ford transit van I used when I was a commercial fisherman getting 12 hour break once a week for 4 months and most of that 12 hour break was maintenance and getting spares

[@BriansFarmingVideos]

Sounds rough

[@nashcobb3056]

here to help