Bridging Tutorial- Key 3D Pen Skill

All about the 3D Pen technique of Bridging! I start with the basics and then move on to my tips and tricks for effective Bridging.
Finally I share some easy and cheap methods to practice Bridging, which will help you improve this important 3D Pen skill.
Come say hi-
Twitter: / potentprintable
Main 3D Pen used in this video:
amzn.to/2K6c5AT
(provided by Scribbler 3D Pen-
scribbler3dpen...)
Tools and Supplies used in this video:
Wood Burning Set
(**use stainless steel tips**)
amzn.to/2Uypslu
Flush Cutters
amzn.to/2GUzqUj
Blue painters tape
amzn.to/2LggdC7
Tac Adhesive Putty
amzn.to/2Lf2j36
As an Amazon Associate I earn from qualifying purchases.
*The tools and methods shown in this tutorial can be dangerous, so please use the correct safety equipment, be careful and use caution when dealing with anything from this tutorial.*
#3dpen #3d펜 #3Dpero

[@nicksirois1251]

I no longer use my 3D pen as I have a 3D Printer but it’s still a great time watching your videos.

[@sniperdiaper2391]

Thank you! This really helped and my creations are much more sturdy and my bridging lines are much straighter! Thanks again and keep it up!

[@PotentPrintables]

Sweet, glad to hear it!

[@__kengfei__]

good tutorial，thanks for sharing

[@PotentPrintables]

You're very welcome!

[@3DPlasticFantasy]

Each time you make a straight line it makes you feel satisfied. Wonder if you can make better upside - down lines by attaching a small fan next to the 3d pen nozzle.

[@PotentPrintables]

Ha, I never thought of that being oddly satisfying! I could see that though.

[@ArmouryTerrain]

Another very solid tutorial on 3d pen foundation techniques.

[@PotentPrintables]

Thank you! Cheers!

[@MG-Raiden]

I love the actual uses of bridging, like fixing cracks.

[@tobybartlett630]

also can you just make more short videos of your projects a bit more frequent and keep doing these tutorials been loving these vid too much

[@RandomDude1487]

What do you think is the best surface to use a 3D pen on?

[@deckape714]

Thank you I have been hoping to see you do something this !

[@PotentPrintables]

You're welcome, hope it's useful!

[@roh5768]

Really hoped me learn about which 3d pen to get and what to use and improved my skills in a good a way.👍

[@PotentPrintables]

Glad it was helpful!

[@strawberry_sunshine_sparkl5229]

I own a 3d pen and this video helped me! I recommend it good job man

[@PotentPrintables]

My favorite kind of comment- Thanks!!

[@farzibrothers90s]

@@PotentPrintables please help me brother please

[@코끼리스튜디오]

That's a great video. It's the best👍🏻😍

[@quinnbalfour2139]

I love your videos!! ❤❤ Keep up the great work! You are my favourite 3d pen youtuber! I was hoping that you could make a video on stainless steel tips for the Woodburning to smooth method. It would really help me. Thx😁

[@PotentPrintables]

Thank you! I made the stainless steel tips using stainless screws and a grinding wheel. It was a little tricky to make them unfortunately.

[@brookedouglas-cb5iz]

You make really good bridges and other stuf with a 3d pen

[@SuperMouseDV]

Howdy.. Hope all is well.. Im about to get into 3D Pen printing (I have multiple 3D printers) And seeing you have some great instructions.. I noticed you have no new videos in a few years. Hope is ok and Hope to se new content .

[@PresidentBread]

how did i get back here. i still dont even have a 3d pen

[@streemotion8336]

My pen has a feature where I can put PLA or abs filament, but what is the difference between the two as I wanna improve my 3d penning?

[@DoNotPushHere]

Nice as always! I'd love to see mechanical 3d models coming to life. It seems like a world for the 3D printers only, but I love making mechanical models. I have my techinques and I'd love to see yours. Eg. If I need an axle, I don't mind mixing 3D filament with bamboo sticks. Or if I design something like a perefectly straight rail, I draw against a steel ruler...etc

[@mywip12345]

Excuse me! I'm a beginner here. Actually I got a 3d pe nas a gift but the problem is there is no temperature showing led screen. i find it a bit difficult. Can you pls show a tutorial for those pens? Thanks a lot! You are the best 3d teacher ever

[@danieljamiesonillustrates]

a really nice tip.

[@irfanshah3212]

I am a beginner and this is really useful

[@youknoweverything7643]

Bridging is fun and so is drawing up into 3d space when your board cuse it's hard to do and keeps you busy to not be board

[@sudoDavid]

Thank you! I would love to see more "techniques to help you practice" like small (even fun) tasks that reinforce core skills in 3d Pens.. also filament/spool management Did I mention you rock? ☆(❁‿❁)☆

[@PotentPrintables]

Ha ha, thank you! And thanks for the ideas, I'll keep those in mind.

[@wiktorwiecaw2493]

Thank u for tutorial :)

[@PotentPrintables]

You're welcome 😊

[@2735angel]

I’m doing a project where I need to do a lot of filling in big spaces and it takes a very long time and I have to do it double layered is there any possible faster way on filling in big gaps????

[@Rem777rich]

Hello. Please tell me which nozzle diameter is better to use

[@toxicslushpuppy]

Thanks! All I can say is BLAAAAAAAADE!

[@kristanseachon4610]

I have an idea to use injection molding Instead of extrusion because it is tricky and injection molding does not require a strong motor

[@nevankalidheen]

Hi I got a 3d pen for Christmas and it worked on Christmas day but now it wont work when it asks me to choose between pla and abs it switches off and on very fast.How do I fix it.I can ask my mum for more information on it if needed please help me

[@yuli1970]

I'm currently using the XYZ DaVinci 3D pen and it's awful when doing bridging. Also it uses PLA but the temperature is set to 190C. Stringing is abysmal.

[@kingrichard4035]

I'm in desperate need of your help Potent Printables! I know know which 3D pen to purchase after returning my 3D doodler create+. I'm stuck between the MYNT3D Professional or the Scribbler 3D Pen V3 (If I can find it in Canada). Please help!

[@cybergrassx]

2:34 This took me ages to figure out!! Thank you for this super detailed tutorial ; ) By the way, have you ever considered narrating audio books? Listening to this sounds like an audiobook I might have gotten from Audible tbh XD

[@PotentPrintables]

You're welcome! I get other comments about my voice, so you're not alone lol :)

[@leo6354]

remember me when youre famous, also can you try to make a strawberry from a 3d pen? i feel like that would be cool

[@SkylerLinux]

I noticed that you stopped half way through, I'd suggest that for more eveness it might be better to pulse so that you don't get a skinny bit at the end.

[@charleycook9093]

What temperature do you have it on for bridging

[@lover_of_fidgetxoxo6231]

I don’t know what kind of pen you have mine needs to be plugged in every time I use it

[@farzibrothers90s]

Please you are very experienced person

[@guoxiangmo9905]

I can do it now.😊😊😊

[@cassianpalmer2693]

Can you tell me what 3d pen

[@LVDLamVanDuc]

hay quá,hãy xem và giúp đỡ tác phẩm của tôi:))

[@zaraheart]

I did bridging without knowing I was doing bridging lol. I was trying to make a 3D cube for my son. I told him id make a minecraft cube, but i wanted it to be strong. So I just quickly went back and forth on each side and put lines to give it reinforcement. I guess Im smarter than I think haha

[@sociasellen1889]

Wow 😮

[@tobybartlett630]

I have a pen that uses plc. and its saggy but I'm getting a new pen for christ;mas

[@PotentPrintables]

Enjoy your new pen!

[@kristanseachon4610]

Idea:How to make filament out of waste easily like abs

[@kristanseachon4610]

To make filament out of waste plastic

[@roz5792]

Ah imagine someone building whole bridge by a 3d pe-

[@austinagustin7355]

I want a 3d pen but I don't have one

[@orangeGuy.vr24]

i cant bridge cause ive not got a 3d pen yet

[@ruzzackovich4067]

Easy to learn but Hard to MAster

[@PotentPrintables]

Absolutely!

[@augustopazcharao9096]

What is the best 3D pen you have ever tested?

[@farzibrothers90s]

Please brother can you help me by seeing your videos I will make new things

[@OrigamiTreasure]

First

[@PotentPrintables]

First reply :)