BRILLIANT BEST IDEAS 2023

[@rona291]

Thanks!

[@axcreates_official]

Thank you very much for your support!!👍❤️

[@joshrichards6486]

You really should offer plans for the stuff you create. It’s great!

[@viorsa8200]

Espectacular como siempre, unos proyectos increíbles, maestro muestra la colección en un próximo tutorial, gracias por compartir, un cordial saludo y por supuesto un merecido like desde Narón (Galicia)🔝👍🤓

[@axcreates_official]

Gracias 😊👍❤️

[@NorBenz-fz3sn]

شكرا لك اخي....افكارك ملهمة... استمر....اعانك الله.

[@axcreates_official]

😊❤️👍

[@joelbruno881]

Parabéns 🎉 seus vídeos como sempre muito criativos com bastante ideias originais.

[@axcreates_official]

❤️😀👍

[@vinceianni4026]

Hello AX all good tolls good ideas well done

[@axcreates_official]

Thank you Vince! 👍❤️

[@Roel-g4u]

If you have the welding skills like you sir, it's all easy enough. But for me it's magic!

[@axcreates_official]

Wow, thanks

[@fredmercury1314]

I'm not dissing the creator here but I guarantee with an hour's welding practice you could make everything in this video. In less time than that, maybe. It won't be pretty welds, and you're not going to be out there making your own car any time soon, but you can learn the basics and make solid welds. And the cost of entry is low these days,

[@Robinsonarnaldosantanagonzalez]

Nitido gracias por compartir ideas desde República Dominicana. ... bani

[@axcreates_official]

Gracias por ver 👍❤️

[@timniven9461]

A great innovator!

[@axcreates_official]

Thank you ❤️👍

[@antonnovak533]

Odlično ti delajo sive celice.

[@axcreates_official]

Thanks 👍👍❤️

[@KeithMoore-k1h]

Very good work

[@axcreates_official]

Thank you! Cheers!❤️❤️👍

[@High-Tech-Redneck]

good stuff for sure, thanks for sharing

[@axcreates_official]

Thanks for watching!👍❤️

[@globaltim5763]

Super 👍

[@axcreates_official]

Thank you 😊

[@2sumu]

19:28 angle grinder into sander is the best.

[@axcreates_official]

Thanks, glad you liked it!👍❤️

[@kithjanramos1419]

​​@@axcreates_official what it is called?

[@everythingtv1910]

I like this video thank you for sharing it to view and i wish your channel more success

[@axcreates_official]

Thank you so much

[@davidjimenez-sf8rj]

Que moyeja de bueno. Gracias por compartir

[@axcreates_official]

Gracias, un saludo!❤️❤️

[@sangmai4983]

Quá điêu luyện❤

[@vishalsupekar]

Very impressive work

[@axcreates_official]

Thank you so much 😀

[@atinaatlna5397]

Браво!!!!! Супер !!!!

[@axcreates_official]

Thank you ❤️

[@raylidell3613]

You, Sir, are a metalworking Genius!!. Thanks for all the great ideas and techniques.

[@axcreates_official]

Thank you sir! Glad you find the content useful!! Happy New Year 🎈🎊🎆

[@arunbhatt670]

Excellent Sir, idea no.1 is quite faster and seems difficult to understand. Please show the details of materials used. Thumbs up once again.👌👍🌹🙏

[@axcreates_official]

Thank you, glad you like it! Thanks for your comment!😊👍❤️

[@nathkrupa3463]

Good work bro nice work 💪 👏

[@axcreates_official]

Thank you very much!😊👍❤️

[@Никш9с]

Кирпич можно отколоть и без этой приспособы...😂😂😂

[@droppindeuces6981]

I think I've just found my new favorite channel. Dude is a DIY Demigod!

[@axcreates_official]

Thank you! Welcome to AX Creates!! Glad you like the content!👍❤️❤️

[@PartyOf8Please]

I could use one of those angle grinder clamps (#3). That is really a slick accessory!

[@axcreates_official]

Thanks, glad you like it!!👍😊❤️

[@gmchan279]

Genius

[@axcreates_official]

Thank you 👍❤️

[@GpunktHartman]

I like the „ Pacmen“ Cutter🤣

[@axcreates_official]

Thanks 🤣👍👍❤️

[@ВладимирХолмогоров-ю8э]

Класс , молотки !!! Вещь классная ❤❤❤😊

[@axcreates_official]

Thank you 👍❤️

[@ПетроЛавер]

👍👍👍👍

[@axcreates_official]

Thank you 😊❤️

[@АлександрПанчев-с9ч]

Вот зачем я потратил 20 минут своего времени?

[@Thornik2012]

+1. Самые тупые механизмы, только просирать металл и время.

[@johnrizzato9192]

Do you have a video showing how you built the hold down device with the point on it?

[@axcreates_official]

Yes, thank you for watching. 👉kzbin.info/www/bejne/fqmwhHl9idOVaM0

[@torowazup1]

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

[@axcreates_official]

😊❤️

[@santatrifaka1524]

Дяденька, да вы маньяк в хорошем смыслеваши идеи просто сумасшедшие, спасибо за идеи.

[@axcreates_official]

Thank very much! I’m glad you like the ideas!! 👍👍

[@BXBvlog]

🥰👍👍👍👍👍👍👍

[@axcreates_official]

👍❤️

[@rsz90182]

Why not harden the blade and angle?

[@axcreates_official]

👍👍

[@figlimigli6385]

изобретатели, люди труда как правило с Большим и Добрым сердцем. они спасают Мир!

[@axcreates_official]

❤️👍👍

[@kumkumkumkum9956]

Mixer k kitne pice tools aate hai, aur kitne rupaye ki ,taki ham mixer repair kar sake,

[@kumkumkumkum9956]

1:39 1:41

[@BuckHopperJr]

it was about time to see you use a step bit the correct way for ones it's not a drill bit

[@axcreates_official]

👍👍

[@СергейСидоров-к8ф]

Да ладно возносится БРИЛЛИАНТОВЫЕ ИДЕИ! Только стойка для болгарки стоящая идея. Остальные 6 никчемные и ненужные,сам выбросишь их.

[@Thornik2012]

Опять же, если тебе так нужен "отрезатор" для железа, куда умнее купить специальный грайндер на стойке, где стойка промышленно разработана, поддерживает разные углы и т.п. А колхозить "зажиматор", потом вставлять/раскручивать болгарку - оно надо??

[@toastyovens8777]

Jeebus, get a frikkin drill press, bro.

[@ThierryFonverne]

C'est super mais il faut le matériel pour.

[@axcreates_official]

👍👍

[@Se-La-Vi]

Красива професійна робота. Але я не знайшов відповіді на питання "навіщо воно мені?"

[@Thornik2012]

В енотов кидаться! Умнее я применения не нашёл.

[@tolikt]

What do you do with your best Ideas?😅

[@axcreates_official]

I collect them! 😀

[@NorBenz-fz3sn]

و ما شأنك انت ؟؟؟!!! عليك تشجيعه بدل احباطه....

[@Thornik2012]

Just paint and throw away 🤣

[@dory95dory]

1900 annata

[@Trikk57]

Forgot to drill the hole first....

[@PeterNetped]

[@axcreates_official]

😊👍❤️