#45 Homemade Pallet Fork Build For My Bobcat 743

[@robertdominiczak6523]

Glad you mentioned Andrew,I’ve learned a lot from him and I’m doing the same from you. By the way I’m 66 retired. Good work.

[@joyceosborne4179]

You are amazing at making things from nothing! I really enjoy seeing you use creativity to make something useful! I also like your Ozzie gloves...

[@Superduty_59]

I recently found your channel. I'm looking for a 743 or 763 for use around my house. Your work is impressive. I also love watching Andrew Camarata and his crazy stuff. His container castle house is awesome.

[@StevesBeyondRepair]

Thanks!

[@poolmotorrepairguyFL]

The Florida pool pump motor bearing repair guy approved ! that was good info, Steve

[@StevesBeyondRepair]

Thanks Jay!

[@btj1844]

Another great build Ozzy! You are a master fabricator for sure. We've used that Rust Reformer paint with great success out at our place where theres some rust but way too many spots to ever hit with a flapper or wire brush. Can't wait to see the new building videos from the slab on up!

[@StevesBeyondRepair]

Thanks Ben!

[@allenanderton2246]

Very nice job on these forks. I can't understand why you don't have 100,000 subscribers. Your videos are among the best on KZbin. The level of detail is just right, not to tech heavy and not to glossed over. Here's a suggestion for a new video; next time you go to the steel supply store/scrapyard shoot a video of how you go about picking out steel.

[@StevesBeyondRepair]

That is a great idea!!! And thank you for super nice compliment!!!

[@davidmartin5179]

Great job.

[@StevesBeyondRepair]

Thanks Dave!

[@lesthompson5907]

hols in the bottom bar & you will have a buck rack to once you buy the tine's ?

[@StevesBeyondRepair]

Hey Les I have a question. I need to find an inexpensive bit holder for a harbor freight metal lathe I bought used. Any suggestion on what I should buy?

[@siliconvalleyracing5370]

i love the fork build but love that bronco in the back a whole lot more i got a 1993 with a 408 fuel injected strokker

[@StevesBeyondRepair]

Thank you! One of my only regrets in that restoration is that I wish I had built a stroked Windsor!! Need to do a few things to it...maybe roll cameras on it.👍

[@jeffholm9086]

Nice build, but those damn dogs!...You should record them and play it back at high volume at 2 AM in a loop.

[@StevesBeyondRepair]

Hahaha! I agree!!!!

[@bb1mhc220]

What make and model of boots are you wearing in the beginning of this video? Awesome content btw.

[@StevesBeyondRepair]

Thank You!! The boots are Ariat work steel toe. not sure of model number. bought them at boot barn. they are by far the most comfy boot i have ever owned!

[@stuartkorte1642]

I’m wondering why the top horizontal hanger plate was stuck out and angled. You said you were doing that but I didn’t catch why. Thanks for posting. It’s the basic design I’m going to follow.

[@StevesBeyondRepair]

Looking back at this, I welded the lower slide plate for the forks flush to the 2 inch square tube on the bottom, and needed the top to be pulled or angled away from the 2 inch square tube so it could slide properly. If I had to do it again I would build the quick hitch part angled back more(spaced further on the bottom). It works great, but cant tilt back as far as I like.

[@raytravis4097]

g,day steve a job makin the forks, hows the ranch block coming along ? .cheers mate....

[@StevesBeyondRepair]

Hey Ray! Thanks! We poured the foundation for my metal building this past Thursday. Cant wait to try my hand at putting it together. Cheers!

[@1farmgate]

What was the name of the channel you recommended? The guy that hits things with big hammers and welding, also uses the clamps, I couldn’t hear what you said? Great vid again thanks

[@StevesBeyondRepair]

Oh yeah, Andrew Camarota. 👍

[@wovenwire_4.513]

Nice job! I just bought a fork for my 743, should have made one! Whats in that white plastic can you dip your welder tip in?

[@StevesBeyondRepair]

Thanks! They work perfect! Cant wait to see if I can root up some small stumps. That stuff is nozzle gel. Keeps the slag from adhering to the inside of the gas cup, makes it easier to clean it out.

[@wovenwire_4.513]

@@StevesBeyondRepair i have a friend that uses forks to rip out old pavement. I bought a stump bucket and will use it when my 743b leak gets fixed. Be useful for drain ditches too. Good idea on nozzle gel, your work always looks good. Thank you for your videos!

[@Kyle-ev4fk]

Nice work, but you shoulda put a hammer holder on there since you built it so tight. I was tryna tell you fer you painted, but it was like you couldn't hear me.

[@StevesBeyondRepair]

Hahaha! You are so right! I was using it the other day, and had them set to the outside. I was scrambling to find something to hit on them beside my foot, to move then in! I also found I needed to build in more upward rake to it... oh well, they still work really well. Thanks for the comment!!

[@johnpyle8027]

You may have the only video on KZbin doing this. I have the forks and the quick connect plate will be here tomorrow. I paid $178, I couldn't possibly buy the material for that now at $6/lf. When I got home, I started looking at the forks and realized my quick attach is a flat plate. By the time I finished your video I have all sorts of ideas not. You got my gears straightened out!

[@StevesBeyondRepair]

Love it!!! I use those forks all the time!! One thing I should have done was build in more lean back in my brackets. When I pick up a pallet of stuff, I cant quite tilt back as far as I would like! Good luck!!

[@johnpyle8027]

@@StevesBeyondRepair Good to know! Since I bought the plate, I will put it on the tractor and build to position. Thanks!

[@robertdominiczak6523]

If you need to know anything about welding see ic weld he is fantastic.

[@stevebillow395]

How much you charge to build me a back board for my forks

[@eduardfrazao3506]

don’t use the megwelding you should use 7018 or 5/32

[@StevesBeyondRepair]

Yes sir, that 7018 rod is strong! I'm just not as practiced with stick welding.

[@lylekleiber2000]

if you are chamfer your top plate your forks will slide better

[@StevesBeyondRepair]

Great idea!