Brondell Swash CL99/S101: The Ultimate Non-Electric Bidet with Dual Nozzles and Adjustable Pressure!

[@drinny26]

I just bought one, and as an American, I can say I am late to the party. This is the best toilet seat. I wish I bought it 10yrs ago. If you’re reading this go out and buy one right now. Your life will change. lol

[@juniorvanderwoude2645]

I just installed this exact seat to my toilet and I think it works great. I was concerned about the cold water only but actually I think you can get by without the hot water. I had no hot water line or electrical plug handy so that made it difficult to install a seat with all the bells and whistles. Wish I would have gotten one sooner.

[@raindrop2309]

Unless the toilet is heavily used water will sit in the pipe, feeding the toilet for hours and will be warmer than your cold water

[@ivylam0168]

But don't you need to dry after the water spray? And is it clean enough? Perhaps for pee but not for poo...are you confident that you are all clean? And if it can dry up, your pants will be all wet. It doesn't seem practical for me at all to replace the tissue paper

[@smokeskull]

I am no environmentalist but I love these bidets. Never have nicotine stains in my shorts any more.

[@HipIOReviews]

😂

[@silvanamatias2]

Do you know why sprays outside the toilet when changing from front to rear? Even outside the toilet?

[@CharlesBenvoulin]

That’s an automatic self-cleaning cycle

[@IOXY3]

Non electric? Does this mean it shoots cold water up the bunghole?

[@HipIOReviews]

That is correct 😄. They have another non electric version S102 that you can hook up another line to temperature adjust.

[@pechos26]

Perfect to wake up early in the morning

[@HipIOReviews]

😳

[@johnbarone8948]

Good if your bunghole is too 🔥

[@johnbarone8948]

Better than caffeine 😂

[@kevinkim2299]

I think washer is already installed. Just extra one provided

[@RusSELLHutchings]

How do I adjust the seat forward once installed. I can't seem to adjust even after loosening the fastener bolts.

[@HipIOReviews]

Mine leaves a .5" lip.

[@DirtyMoneyHipHop]

I think you just push a button near the back on one of the sides of the toilet seat and then pull/push the seat to where you want it. I did it when setting mine up a few weeks ago, and I remember I had to do that. Although I bought the S102 dual temp. model, but I think it is very similar to this S101 model. Or watch the Brondell installation you tube video, that's what I did. They show you exactly how to do it. Great product in my opinion for it's price, simplicity of installation (I'm not much of a handyman and it was easy), and ease of use. Stay fresh my friends! Cheers

[@NAN-CAN]

Thank you . I struglled with pulling the seat out for the last hour. I read your reply and one push of the button did it . Thanks @@DirtyMoneyHipHop

[@roxannewilson5882]

Is there any way to warm up the water from the nosel. Thanks for the review.

[@HipIOReviews]

I believe the S102 will allow you to do that.. honestly the cold water isn't as bad as you think it's going to be 😂

[@Drag596]

I just installed one and cold water is not an issue. I also thought it would be but, it doesn't feel cold.

[@raindrop2309]

Unless your toilet is heavily used water will sit in the pipes, feeding the toilet for hours warming up to room temperature. It will be cool, but it won’t be freezing cold no need for heating.

[@bobbyjamieson7878]

Hi. Newby here. Great video. I bought the Brondell CL99 and tried the easy install. However, when I slid the seat onto the mounting plate, it didn't connect properly and now the mounting plate is attached to the seat but not to the mounting bolts under the bowl. Can I reverse the process to start again? i.e. - how do I get the mounting plate off the seat?

[@Volfas]

One thing I am confused by is how do you slide it out after it clicks in? I am using good force but it's stuck

[@HipIOReviews]

There's a button on the right side, just press and hold as you pull

[@andrewcarson5567]

What does the button on the left side of the bidet do? How do I remove the bidet?

[@HipIOReviews]

That button is the seat release to take the seat off

[@nobay3622]

So this one is only cold water? Which one has water temp adjustment? Please

[@HipIOReviews]

S102

[@drinny26]

The cold water doesn’t feel cold. You don’t need warm water.

[@danielbaron2358]

Brondell is an awful company to deal with.. I was sold a defective Swash 1700 and Brondell expected us to pay for the parts. Terrible to deal with.

[@gusrui]

Does it include a plastic threaded fitting or brass threaded fitting?

[@HipIOReviews]

Nope only what I show in the beginning of the video

[@curtisthompson3611]

Its a flex hose and brass tee. But the 3/8 nipple on the seat itself is just plastic.

[@brianduchowicz5321]

Can I use a shorter hose connecton

[@zisisstip49]

I am wondering, why don't someone mention that these back-to-front jet bidets splash (or not?) water mingled with poop towards the urethra? It is time for every body to know that there are FRONT-TO-BACK sanitary bidets and of very low cost.

[@arod88]

Such a bad feature I’m amazed it got through quality checks. How would you think splashing nasty poop water is ok? They should have had a separate button or twist switch even further for the self cleaning mechanism

[@samanthanembhard500]

@@arod88how do you think it’s two different parts an they are out of sit while the other is being used I have used these for years no problems

[@arod88]

@@samanthanembhard500 can you say that again? don't understand what you're saying

[@modyyaso9482]

السعر

[@imppaco]

This is an install instruction video. Where's the "review"?? I'm trying to see if it's better/worse than others.

[@Roombacare]

worse. This is not a rear end cleanse, it is a frontal assault.

[@cookerama6265]

Agreed. It sprays too far forward and no adjustment.

[@raymondharley9812]

​@@cookerama6265 Are you sure you are using it correctly? You have to turn the knob all the way to the front or back to get the bunghole.

[@cookerama6265]

@raymondharley9812 yea dude. It has 2 sprayers but both shoot too far forward. Even my girls say the same thing.

[@homeark]

It was total disappointment. Badly made video. Failed to show properly the T-Valve installation.

[@HexaDecimus]

Just screw it in

[@hurhurhurhurhruhrurh]

Just use a wrench?