Рет қаралды 40,613
Hello everyone Today there will be such a bird and a flower. I have here is such multi-colored sequins,so same chopping menthol color of and here is such feathers, will try their, too, here to apply. Let's start: I drew a drawing by hand, redraw it on paper, cut it out and translate it to felt, cut it out, but not along the contour, but in this way. Make the loop thread, I have a 1.25, monofilament sew, she 0,12, and then I decided to make a bird beak longer, let it be like a Hummingbird, or a Paradise bird. The rest I do according to the drawing, I put the ruler exactly on the pencil. Now I start with the bird itself and such multi-colored sequins, they are different not only in color, but also in size. Sew the eye will be black color rondelle 2 mm and sheathe pink beads, then take piatco 2 mm purple and pink strung 4 mm and kept the needle 2 mm to the top, all repeat and so the whole bead is covered, here's one I did. Next, I begin to sew a menthol-colored cabin. I made the left plumage, this is the option I liked the most and now we will make the right wing together. The tip will be pink, the middle purple, and closer to the center of the sequins will be bluish. I sew the sequins from the end so that they form a scale, or in this case, a plumage. Strung 4 mm and 2 mm pietka pink hue, take the needle through 2 mm helping hand to get up sequins as I need the next pie is too pink, I bring the needle close to the sewn sequins, strung sequins again 2 pink, one darker, the other lighter, one 4mm, the other 2 mm purple next go to 4 and 2 mm, sew likewise, through 2 mm. Depending on how far you will move the needle, the sequins will lie horizontally or vertically, so I used a small distance to make the sequins slightly bristle, imitating the plumage. I repeat everything as on the left wing. With sequins, I will stop for now and glue this pink crystal 2 to 1.5 sew it from the inside out. I'll keep putting the sequins on. Let there be a lot of feathers, sequins, too, a lot, sew to the crystal. I proceed to the lower part of the body, use a glass bead, sew sequins in the middle. Now I'll go back to the spout and make it out of this gray bead. I cut out a bird, I want to make some pendants for this part, they will serve as a tail. I take an ordinary cotton thread, string pink beads and this drop, add a translucent pinkish Rondel, then the chopping block, which I have already used. That's how it turned out, 5 centimeters, I sew it here for the edge, I do not tighten it much, so that the suspensions are movable. It's time for the highlight of this brooch: it's feathers-blue, pink and menthol color. I glue them on the back side, just glue the cardboard layer so that the brooch is dense. The back side will also be made of felt, I glue the fastener to the super glue, then I do everything as usual. I start processing the edge and I do not mind that the bird was a little bigger, I will process beads in the color of glass beads, cutting the American way. This is what processing with beads looks like. This is what turned out to be a Paradise beauty. In a couple of birds made this fancy flower. I show it to myself, I can't help sharing this beauty with you, it turned out so great, it's very refreshing image.