Brother DCP-J100 "init unable 30" Fixed ||How to fix Unable to Print 30 Brother all Inkjet Printer||

BROTHER INKJET ERROR - UNABLE TO CLEAN 30
If you get an error “Unable to Clean 30” on your brother ink-jet printer here are some things to try before you tear your hair out:
1-Open the lid/scanner cover and check the position of the print head and whether it freely moves from left to right
2-Check if there are any obstructions in the cleaning/cartridge park area (right hand side under cover)
3-Check the encoder strip found behind/above the print-head ~ Note: on some models this may require the printer to be disassembled.
The following is the disassembly instructions for a Brother DCP-330 which had an “Unable to Clean 30” error after a paper jam.
You will need a number 2 Phillips screw driver and a small flat blade screwdriver for popping clips etc.
Remove cable covers and scanner support leg.
Remove the 3 screws holding the display/control panel. Remove all remaining screws holding the top cover
With the top cover removed you will have full and easy access to the head carriage and encoder strip.
With this printer, the fault was caused by the encoder strip running over the top of the reader instead of in it
Another common cause of carriage problems is a dirty encoder strip so this one has been cleaned (use ONLY water on a damp clean cloth, the encoder strip is VERY easy to scratch and ruin. Solvents will wipe off the encoding).
To re-assemble just reverse the instructions and all going to plan your printer will be printing like new again.
This procedure is for the DCP-T300, however a lot of Brother ink-jet models follow the same format. If your model is different you may be able to adapt these instructions to suit.
Supported models: Brother DCP-J100 Brother DCP-J105 Brother DCP-J125 Brother DCP-J132W Brother DCP-J152W Brother DCP-J172W Brother DCP-J315W Brother DCP-J4120DW Brother DCP-J515W Brother DCP-J525W Brother DCP-J562DW Brother DCP-J715W Brother DCP-J725DW Brother DCP-T300 Brother DCP-T500W etc.
#Brother-Init-Unable-30
यदि तपाईं यस च्यानलमा नयाँ हुनुहुन्छ भने कृपया च्यानललाई सब्सक्राइब गर्दिनुहोला र छेउमा आउने घन्टीलाई दबाई All मा छान्नुहोला यस्तै यस्तै भिडियोहरु हेर्नको लागी सब्सक्राइब गर्दिनुहोला
भिडियो मन परे लाईक कमेन्ट सेर पनि गर्दिनुहोला। धन्यवाद
नोट:- यस च्यानलमा अपलोड गरेको भिडियो डाउलोड गरि आफ्नो च्यानलमा अपलोड गरेको पाएमा
प्रचलित कानुन बमोजिम कारबाही गराइने छ।
Note: - If a video uploaded to this channel is downloaded and uploaded to your channel
Action will be taken in accordance with existing laws.
Welcome to my channel Crypto Nepal,This channel is about how fix printers ,HP ,samsung , Canon,Epson,Sharp,Toshiba,Richo,Brother,Kyocera ,Xerox,Lexmark,Konica and Konica-Minolta printer
This channel have videos about Knowledge ,Technology ,Repair printer ,Fix printer Error ,and change other for printer .......
Thank you for all your visited on channel Technical Jasis

[@llf9319]

ano po yung bilog na notch sa taas ng printer head? ano po ang function nyan?

[@navpreetsingh8895]

Sir ye Jo part aapne change kiya hai vo kahaa se milega, same problem hai

[@sasoukiyt5963]

Il y,a un problème à me imprimante

[@ashnasafiullah3817]

please how to make scanner errors

[@manojthakur4152]

Sab kar liye sir kya head kharab hai ya kewsl

[@preetipatra7112]

I have gone through the same problem " my printer model no. DCP- T300 shows Init unable 30" i just tried some simple cleaning steps from the site named as " Brother at your side" plz don't open your printer as shown in the vedio coz the internal material is made of plastic and it can break easily while opening so just focus on 2 things no paper stuck into your machine and try to move the printer head by long press around 10 seconds by opening the printer cover

[@GhilieahV]

I dont understand, printer head? Pls help

[@jalindarghode1747]

Mera brother dcp_t300 he usakabhi yahi problem he

[@ssenterprizes3823]

Bro muzhe bhi help chahiye print unble 76 aa rha hai baar baar brother dcp t300

[@technicaljasis]

Head uncapping does not work normally. Remedy: - Remove the jammed recording paper from the Platen part and the Maintenance unit part. Foreign materials inside the Maintenance unit Remove foreign materials. 2 Foreign materials inside the Engine unit Remove foreign materials. 3 Carriage motor defective Replace the Carriage motor ASSY. 4 Maintenance unit defective Replace the Maintenance unit. 5 Main PCB defective Replace the Main PCB ASSY.

[@manojthakur4152]

Mere brother dcp j 100 me init unable 49 bata raha hai kya kare. Please help

[@manojthakur4152]

Sir ab 4f bata raha hai kya kare

[@rahismansuri1795]

BHAI MERE PASS CANON MF244DW PRINTER HE USME DUPLEX KHARAB HOGYA THA, MENE REPAIR BHI KRWA LIYA THA BUT AB LOCKDOWN ME FIR SE KHARAB HO GYA HE OR KOI BHI SHOP KHUL NHI RHI HAI.... BHAI AAPSE REQUEST HE KI THODA SA GUIDE KRDO KI .... KESE ME PRINTER OPERATE KRKE DUPLEX PRINTING SHI KR SKTA HU

[@technicaljasis]

ok kosis karta hun lockdown mey fasa hun

[@rahismansuri1795]

@@technicaljasis BHAI JESA BHI HO PLZ HELP KRDO YARR

[@Rama-pj8ug]

Not move 🤬🤬🤬🤬🤬