Love this video, I am learning so much tonight. Need to go to bed and stop watching. So much fun.
@donnacamp56632 жыл бұрын
Thank You Julie you make it so easy to learn from you
@bobbidietzmanm84217 жыл бұрын
I have been so intimidated the last few days, and even procrastinated getting my project started. Thank you so much for your easy to follow tutorial! Today I made my first design, template, and rhinestone tee shirt :) #fanforlife
@kimturner84888 жыл бұрын
I can't wait to get my machine and try this. My daughter loves to "bling" things up.
@GeorgeLangley6 жыл бұрын
TIP: lay the "shiny" backing board in a large thin plastic tub before you pour your crystals over the template. That way, the crystals don't go flying all over the place and getting lost when you brush them, AND you can push the excess away from your template when picking up the transfer sheet, so you don't get static attracting loose crystals as witnessed at 9:43. It also makes it easy to collect them afterwards to put them back into the container. (Get a tub with a lid and you can also use it to store your kit and crystals! The lid itself might even be better to use as it will be thin enough to easily maneuver the brush and other tools over the lip.)
@oodles_of_noodles.6 жыл бұрын
Thanks so much.. I have had my scan n cut for 4 years and have been scared to use it. I'm getting it out with the rhinestone kit tomorrow and blinging up some dog wear :)
@Mismochy728 жыл бұрын
your videos have been so helpful to me!! very informative and easy to understand! thank you! i do not do well with instruction manuals.
@MidSouthConstructionNashville4 жыл бұрын
Love your videos! So helpful! Thank you!
@DavidNBerg5 жыл бұрын
Thank you, once again, Julie for all your ideas and techniques with the ScanNCut. I am fascinated with sliceform cards and would love to be able to make some. I know there are PDF patterns on the Internet that are shared and free. Could you please do a video of how you would take one of these and using the ScanNCut, transform it into a popup card? Thanks so much, David
@missydavid922 жыл бұрын
So thankful for you! I am new to scan and cut and trying to watch ALL your videos. Is there a second part to this video? Can you show how you did your name? That font doesn’t match the font provided with rhinestone kit. Thank you again for all your videos!
@BrotherCraftsUSA2 жыл бұрын
Julie used her own handwriting for her apron. Here is a link for more information: www.brother-usa.com/blogs/brother-crafts/get-some-glimmer-with-the-rhinestone-kit
@sandralock60495 жыл бұрын
Hi Jenny Is it possible to do the tutorial showing how you did your name on the apron. Thank you
@douglasvilledarling29357 жыл бұрын
Great video! I will be getting one. I want to be the "master of my own universe" lol
@susannes28065 жыл бұрын
I love this, thanks bunches🥰
@ninascudder23663 жыл бұрын
Hi Julie, please could you do your apon using different fronts as they will be different size rhinestones thankyou 😊
@carolineallen72523 жыл бұрын
Where do you buy the rinestone kits as I have looked and don't come with the transfer tape and the brush
@pattsyorsburn24716 жыл бұрын
I'll have to come back and watch this again, cause my scan n cut is not set up yet. So I'll save you to other sites.
@marshaholder65107 жыл бұрын
After choosing a font to make my rhinestone tshirt, it looks as though it is double rhinestones around the lettering. How do I make it into a single line of rhinestones?
@patriciapreciado50882 жыл бұрын
Hi Julie, I have a ScanNCut CM350 model. My question is I want to start to make templates to rhinestone t-shirts, etc. Which is the product I buy, I confused. Is the Scan N Cut Rhinestone Starter Kit or the Scan N Cut Starter Kit CARSKIT1. Please advise.
@BrotherCraftsUSA2 жыл бұрын
If you would like to get started with making rhinestone templates and designs, the Brother ScanNCut CARSKIT1 Rhinestone Starter Kit would be recommended. You can see additional details below: www.brother-usa.com/products/carskit1
@suenorton32514 жыл бұрын
Just downloaded canvas and added the rhinestone option but the wizard isn't showing up like yours is. What am I doing wrong? Shall I call Brother support?
@louj1013 жыл бұрын
Hi thanks for your video ......can I ask a question, can the rhinestone kit be used on wool?
@louj1013 жыл бұрын
Thank you so much for this information X I looked everywhere but couldn't find any information or videos on this so you really have helped lots. Could it be possible if you could do a video on this, i would really appreciate it if you could 😀 Thanks again, have a lovely crafry day
@robertdumoulin46123 жыл бұрын
Hi Julie where can i order différent spécial effect like disney and other i try to find this on brother but i dont find.
@marvaloyd5607 жыл бұрын
Great video, thanks
@starmiller7Ай бұрын
My blade does not cut through the fabric😩 any ideas on what I can do? What should I set the pressure at?
@pdelmercado5 жыл бұрын
That is awesome!
@ezeprojects54255 жыл бұрын
All this stuff is really labor intensive. Isn't there another way?
@dlanahitt42895 жыл бұрын
I am having difficulty with myDX 225. The first test cut went completely through the backing. I have it set on the half cut setting. Please advise on proper recommended settings. Thanks!
@shamirrahclyburn31885 жыл бұрын
did you get a answer they are currently closed and I am having the same issue
@kimgalard90624 жыл бұрын
Hi, I love this tutorial. Question, how do you convert SVG file format to an PDF format? Thanks
@panchovilla34462 жыл бұрын
Wow. Yes you can
@barbarawebb9942 жыл бұрын
May I ask which font you used on the apron?
@darnbunny15 жыл бұрын
Hi Julie, Can the Rhinestone Kit be used with the DX125?
@MsBaje697 жыл бұрын
Julie, can I use my heatpress instead of the iron?
@mcharmayne82714 жыл бұрын
MsBaje69 have you tried it with the heat press?
@MsBaje694 жыл бұрын
M Charmayne yes I did and I still have shirts with them still intact.
@deeyee34576 жыл бұрын
Can you use images from adobe illustrator or google
@ginaduran84143 жыл бұрын
Can this kit be used with an iPad or it has to be a pc ?
@mistikbass2 ай бұрын
Where do I purchase this?
@dianevien46134 жыл бұрын
how do you find out what start up kits will work on the SDX
@AshlynsCardShop5 жыл бұрын
Will this work on paper, too? I'm thinking for card making and pocket scrapbooking.
@AshlynsCardShop5 жыл бұрын
Thank you!
@chrismaitchell56965 жыл бұрын
What blade settings did you use please?
@elmawhite66706 жыл бұрын
Are brother bringing out a new scan & cut
@louiseasmr77326 жыл бұрын
What do you set your blade to?
@znycelondon53136 жыл бұрын
Great idea. I want some templates made. If you have this machine.....in the ATL.....post here commission work for you...
@lindalimas74486 жыл бұрын
When I open my Canvas it does not show the wizard it shows rhinestone is activated but I get no wizard. I can however click on premium and see the wizard there but clicking it does nothing. HELP PLEASE
@64dita7 жыл бұрын
i got my cm350 I love it so I went get the rhinestone kit I was so happy to start and I open the box but did not seet the card to activare my kit and thur it awaythe box :( I think I thru it in the box know can't use it without the card so frusteded! plz help!!!!
@jandksplend7 жыл бұрын
Did you look through your packed materials? Mine was in with the sheets not loose in the box.
@patriciavanlierop65408 жыл бұрын
Awesome
@beautyandthelilbeast68974 жыл бұрын
CAN YOU DO THIS WITHOUT THE KIT I ONLY HAVE THE FREE SOFTWEAR
@deeyee34576 жыл бұрын
What is fcm format? I have a design n cut
@deeyee34576 жыл бұрын
I have the rhinestone software but I can only use it in the canvaswork space when I type in the website in the browser but the one (canvas) I have saved on my desktop I can’t access the rhinestone software can you help
@lindastarzenski87705 жыл бұрын
Can you use heat press to heat them on item
@leanycumare89618 жыл бұрын
in spanish please....
@25206yahooCom7 жыл бұрын
When I activated the Brother Rhinestone Kit it did not put the two icons on the scanNcut canvis. No rhinestone wizard please help me.