Brownells - Using JB Bore Paste and Kroil with the VFG Bore Pellets

This video demonstrates how to properly clean your rifle or shotgun bore with JB Bore Paste, Kroil and VFG Pellets. This method should restore accuracy in fowled barrels and is used by top bench rest shooters. For more information please visit www.brownellsvi....

[@gunsmith549]

Just a Hint*** NEVER clean polish a bore without something on the scope lens. A rubber glove works well if you do not have lens caps. A single drop of oil or JB will do damage while you try to clean it off.

[@nickholderman4891]

Thanks!!

[@kyotra]

Should really have them covered _any_ time it's not in use, period.

[@michaelenochs4033]

They probably did this for the making of this video to make it look more professional and simple. But I agree, you should always have lens caps or some form of scope covers. Good idea!

[@mikemccabe1581]

Started using KROIL, JB bore paste and the pellets some time ago. Does the most thorough job possible. No way any amount of scrubbing with a bristle and cotton wads on a jag even comes close. And this does it with a lot less effort. I used to soak overnight with Hoppe's solvent and it never completely removed all the fouling. This is so much easier and faster too. A++

[@karabak8103]

Does this method completely replace the need for brushes and jags for bore cleaning?

[@mikemccabe1581]

@karabak8103 I start by running a nylon brush thru a couple passes with a cleaning solution. And then one dry patch (to get out any random crud.) Next, the VFG bore pellets and Kroll with the JB bore paste. About 20 passes. Then, mop-up with a couple cotton patches. Lastly, one cotton patch with gun oil. Works like a charm and cuts way down on cleaning time. When at the range I fire my clean cold bore (CCB) shot straight out of the gun safe. Good precision and accuracy. Cheers. -Mike.

[@jamesharrison2374]

Have been using VFG pellets for close to 40 years. They were sold at the German gun shop I worked at. Have only used them with hopes. I have had firearms that I shoot matches with, and due to the barrel design they only shot well when dirty - after 20 pre sight rounds.

[@Blastwaveactual]

Great guide, a clean bore is an accurate bore. I would however recommend using pellets for fouled barrels rather than fowled barrels unless your trying to remove heavy deposits of chicken, duck, turkey etc.. Also as a cheaper alternative google eds red as a general solvent and bore cleaner. It's simple to mix at home and costs a fraction of the price of Hoppes, Gun scrub or the like. There are even variants that will remove copper fouling and leading if left to soak one of which includes Kroil in the blend.

[@TimeForGoodCleanFun]

i love JB + Kroil! it gets my bores to a mirror shine (assuming they're in good condition to begin with, heh). i'm skeptical of using the Bore Pellets for regular cleaning - they're kinda pricey. however, they look good for applying JB because of the even pressure on the bore.

[@canjo4588]

I do normal cleaning with all of my fire arms but I use the jb bore paste about once or twice a year or before storage to get everything out that I possibly can

[@pj4433]

Just found out about VFG pellets so watching videos their own video says never use any solvents or barrel cleaners and only do 4 runs back and forth. I was worried about going backwards anyway but you are doing it 30 plus times?

[@Lonewlf7676]

Any reason Swab-it bore tips would not work just as well for this?

[@dannywarren1549]

is this a form of bore lapping and cleaning in one ?

[@5jjt]

Will firing bullets, over time, achieve the same effect?

[@notgolfman59]

I must be doing something terrible wrong. I use a Dewey .22 Rod with VFG .22 Pellets and I cannot hardly push it through. How are you able to slide it through so easily????

[@dustoff499]

Can someone explain to me why Brownell's carry the VFG adapter with a female end. My god, most all cleaning rods are female end. We need a VFG male end adapter!

[@paulyp9853]

they have a male end - I just ordered it. Its on a drop down menu

[@xenomorph1317]

Jb paste or toothpaste, same thing. Bonus, you’re barrel smells minty fresh!

[@kangarootha]

How would you recommend using vfg cleaning products on lever action rifles?

[@NoWr2Run]

You can put the rod with the adaptor on it through the muzzle end all the way to the ejection port. Then screw on your pellets already soaked & JB'D UP.

[@davidmaco1]

I do not see a .177 jag specific for the VGF listed for the system anywhere any help?

[@jldave134]

Can this method be used to clean an ar15 barrel wit push rod gas system? I' m wondering about the JB bore paste getting into the gas port in the barrel and then into the gas block and stopping it up.

[@Lucas12v]

I've used it on a DI gun without problems.

[@MrDao92]

Can the barrel brake also be done in this way?

[@gooztala]

Do you have to use it with kroill or could you use hoppes as well with JB?

[@Thoseaboutto911]

Being that JB is dark colored how do you know when to stop using it?

[@SuperSynoptic]

I've been using 'toothpaste' for forty years.

[@tomlagoe8887]

How about .58 cal.? Nobody makes 'em

[@dukebeach1]

Seems like a lot of work for something you could do with 6 passes of a well soaked bore snake. How can felt pads and paste mixed with oil remove fouling better than a brass brush and something like Hoppe's No.9? I would think this advertised combination would polish a bore, but not remove serious fouling. IDK.

[@IBoostedSS]

VFG pellets look an awful lot like felt wheels for a rotary tool such as dremel.... bet there cousins

[@jakevader95]

based on this video I ordered the VFG pellets and the VFG adapter (which only retains one pellet). So I ordered the 3 pellet adapters. I'm trying to clean a revolver, and auto rifle, and a lever action, which means I have to enter thru the muzzle. It is very difficult to get the pellet in the muzzle, and the 3 pellet adapters have a much larger diameter, so the pellets are impossible to get into he bore without reworking the pellets. Very difficult to use in this fashion.

[@jessiepinkman7736]

why not just use a bore swab instead.

[@anthonyrstrawbridge]

👍🏻

[@phillr3]

It appeared that the user used a bore protector to apply/insert from the chamber. Not the muzzle. Perhaps, that assisted insertion?

[@Slow_Hand_Luke]

Tape said: "Swab out bore after using JB... as it has a petroleum base." OK, but does this mean with simply a dry patch or with solvent, etc. ?

[@StropSharp]

Do they make the pellets and adaptor in .17 cal.?

[@brownells]

Unfortunately not that we are aware of.

[@StropSharp]

Brownells, Inc. I use JB and Kroil, but I've never tried them together. I however use Break free synthetic gun oil on the first pass to loosen the powder residue and to lube the subsequent patches of JB as well, the first pass with JB I work the throat area good.... as its where most of the copper is deposited anyway. I also monitor my progress with a clean white cotton patch placed about a 1/2 inch from the crown, then I shine a light into it or place in the sun light to illuminate the the patch. The glare from the patch illuminates the bore wall, thus allowing me to inspect the bore wall. If its clean to the metal right there in that area, it usually means the rest of the bore is the same. I've tried Kroil all by itself, but it binds my patches on the fouling and is very hard to push without bending the cleaning rod. The tiny .17 bore is really sensitive to patch size, and I don't like to cut them any smaller than I have them already.

[@jessiepinkman7736]

why not just buy a bunch of bore swabs, they are pretty much the same thing as these pellets. That probably cost the same or less then the pellets anyway.

[@tam6051]

I use cigarette filters instead

[@NoWr2Run]

HOLY SHEET, GREAT IDEA, HELL I ROLL MY OWN, HAVE MANY FITERS & THEY'RE FREAKIN CHEAP. T.Y. SIR.

[@sylviacandler5541]

Free All is better than KROIL!

[@NoWr2Run]

100%

[@Jeff_Seely]

This is some of the most ridiculous hype I've ever heard. The shooting community is supposed to be a community of integrity and this is just false marketing hype that is bereft of integrity. Every barrel has a break in set of instructions from the manufacturer. Is Brownells implying that they know more about your gun than your manufacturer? They do not! Follow your instructions from the manufacturer always and don't believe junk like this.

[@PromNightDumpsterBaby420]

He changed directions while it was still inside the barrel. I thought you weren't supposed to do that???