Custom Gun Show & Tell with Bobby Tyler

[@JWheeler331]

Excellent!!! Bobby seems like such a nice down to earth guy.

[@Bulldog75stp]

Love the finish on that second gun.

[@paststeve1]

As soon as I'm finished typing this comment, I'm going to the Tyler website! Beeeeeutiful guns!

[@diehardoutdoors]

Look at that 1911 I’m in love, I wouldn’t be able to keep that out of my hands lol

[@roadking99jokerst60]

Right. I see the grip panels are not cut for the main spring housing pin, cool that way.

[@josecanisales3491]

The PYTHON is a beautiful gun that is delicate and sometimes does not work the way they should. Some don't strike the primer hard enough to set it off.

[@johndilday1846]

Very beautiful guns. I love the stag and mammoth grips.

[@Lucastrujillo59]

Thank you for showing these beautiful side arms

[@brownells]

Thanks for watching!

[@jamesbasler1521]

Great work! I'll take a beautifully blued gun over a stainless gun any day.

[@MrRebTyree]

Thanks for taking us along for the ride!!! Tyler Gun Works does some exceptional work for sure!!! I really like 1911 and the Ruger Blackhawk. Heck I'm on the Tyler Gun Works website now!!! Very impressive Custom firearms!!! Love the stag grips, the Custom front sights and that octagon barrel the finish work is amazing on the Blackhawk!!!

[@EverettBaland]

Mr. Tyler makes the point that all should start with. What are you going to use it for? Beautiful pieces there.

[@adqak503]

Fantastic examples of his work. Really enjoyed this video.

[@Monster11B]

I love the deep blue of the finish. I may have to look you up for some work. There are very few real smiths left. I have had too many ruin my guns. Straight hacks. That's why I started to work on my own and when I first started ordering from Brownells.

[@randallbyrd1973]

Very nice work.TY for sharing

[@apkaapnachannel5149]

Great video

[@brownells]

Thanks for watching!

[@erikjensen6503]

Beautiful work! Great advice. I always thought a custom would be out of reach but hearing it may not be makes me excited

[@tk423b]

Great work.

[@roadking99jokerst60]

I've a 3 screw small frame Blackhawk now modded to .44 spl. One smith bored the cyl. another hung a super blkhwk tube, another shortened the brl and put in an after mkt rear sight and patridge front. Belt mtn pin.It has walnut burl grip made by my Dad decades ago that I found again at a gun show. Dad had fit bomber window grip to a first gen Colt when in the Army Air Corp.

[@bobbioook5612]

Good guys 👍🏻

[@joeguzman3558]

If he's form Texas he's going to make a beautiful gun

[@Meta1704]

working on a custom gold cup slide, safari frame 1911... case hardening sounds appealing now.

[@john-paulsilke893]

Some incredible work. I’ve done a few parts bin builds, (AR’s, Tactical Solutions .22’s and the like) but these are definitely next level. The depth of those colours. 😳

[@steveg3593]

Great video!

[@brownells]

Thank you!

[@MrThomass281]

Next video on leather holsters, PLEASE.

[@doranmaxwell1755]

Because my hands are large I always get/make custom grips on my revolvers.

[@lawrencelewis1036]

I had Ben Forkin build a 44spl.on a old model Ruger 357, With Roy Fishpaw stock's, Bowen sights. Ben line bored this gun, as all guns Of this sort should be.I didn't here you mention this.Maybe I missed it.

[@abuzaben]

More vids like this plz

[@brownells]

We hear you!

[@roadking99jokerst60]

I second the motion !

[@jeromehigdon187]

Do you work on Colt SAA (PEACEMACKER) 45COLT ??

[@jackrichmond9899]

Would it be too difficult to ream the chambers on an OM Blackhawk .30 carbine. If I send it to Ruger, they’ll mess with the action. Unless the case length is exactly1.290”, having a hard time with reloads and factory ammo being too long for cylinder travel.

[@dougrybarczyk4449]

Is a freedom revolver close to a custom revolver?

[@TERAN-m3t]

Очень хорошая коллекция, особенно Colt 1911

[@thestonethatthebuilderrefu5231]

How do you make stainless steel look like color case hardened?

[@thestonethatthebuilderrefu5231]

Or is it just blue. Because the cylinder is blue right? How do you turn stainless blue? I mean I remember seeing it turned blue from heat but I thought it was toasted at that point. What ever it takes to make another video. I think I've watched you reface at least three side by sides

[@jayclark2077]

Ruger says they won’t put a longer barrel on my .45 New Model Vaquero with a birds head grip. And they also say you can’t change the grip frame and grip. But here it seems that you have changed both. So can I have a new grip and a longer barrel installed on my New Vaquero? JWC

[@ethanp7183]

Yes, from what I’ve learned Bobby will do new grip styles but ruger only allows re finishing of the original finish and re barrel of stock offered barrel lengths in that particular model/caliber.

[@stevenrush9862]

I need to get my 1911 fitted with mammoth grips

[@eliinthewolverinestate6729]

My pinky finger never knows what to do on a plow handle.

[@kirksmith347]

Why does the cylinder not have the same finish as the frame?

[@KH-rt3ef]

They most often do not. Historically it’s because they were not machined and finished together; the frame required extra carbon hardness while other parts did not, at least, not enough for it to make the production process more expensive than necessary.

[@thestonethatthebuilderrefu5231]

There are a shit ton of perfectly rotting like they died yesterday mammoths in Russia I think, or used to be ussr way up north. Where the ice is melting because of the perfectly normal changing of the earths temperature.

[@Jardarn160]

I didn’t know Neal Patrick Harris gained weight and made custom guns

[@TotalRookie_LV]

It's all nice, but.... (puts play speed to x1,5)

[@ascicomputer]

Mr. Bobby Tyler should answer his email messages.

[@johnsmith-lx9lw]

Custom = RICH and FAMOUS only= IF YOUR NOT RICH DONT WASTE YOUR TIME HERE.