That was awesome, Brandon. Thank you very much. I bought everything at the same time only to find out there are no good directions that comes with either the machine nor the blade to put this on. They leave you guessing as to which way the blade goes. You made it all very easy. Again, thank you very much.
@fredjenkins837210 ай бұрын
Thank you for the refresher. It’s been so long since I put the brush blade on that I didn’t even know where to start. You are a lifesaver
@SaltyCaribbeanDfly4 ай бұрын
Holy cow! that’s how you properly explain things,Bravo sir 👏👊
@deborahpalmer82982 жыл бұрын
Just bought one of these blades. The guy in the shop showed me how to remove the string device and install this attachment but after a few days, I forgot details. Should have done it right away. I'm very grateful for your excellent, straightforward tutorial. Thank you from Canada!
@dionysushues54832 ай бұрын
Great video! Short and to-the-point. This was my first time installing a brush blade and with your video, it couldn't have been easier. Thank you sir.
@jamiewilliams970 Жыл бұрын
Thanks Brandon… between the manual and the dealer… your video was WAY MORE HELP!!!!
@jeffinillinois5 жыл бұрын
Thanks. The stihl instructions were basically garbage. Didnt even know the reverse threads. Saved me a lot of frustration. Much appreciated!
@jakobstalheim51855 жыл бұрын
Just bought a old stihl fs61R at a garage sale for 20 bucks, wasnt running, has been sitting for 10 years, threw some gas in it fired first pull and fired up the 2nd. Just bought a brush blade for it, very good instructional video since I didnt know what the hell I was doing.
@KennyE19575 жыл бұрын
Of course it wasn't running. It didn't have any gas in it.
@KeyGilz3 жыл бұрын
Thank you, your instructions were spot on. Got some brush clearing started today. Thanks for pointing out to make sure the blade is centered.
@mrdilligaf19682 жыл бұрын
Thank you very much for this video. Straight to the point without dragging the video out. This helped me alot. Cheers from Australia
@joewietlispach73518 ай бұрын
You just save my project. I’m using a STIHL FSKM trimmer you help me figure out how to get all the fittings back in the right spot. Thank you.
@rns7426Ай бұрын
Mines a little more updated. Don’t have a loose washer. Buddy you was better than manual! Thank you!
@GreatMooglyGoogly3 жыл бұрын
Thank you for your awesome help! It’s funny… you said to turn clockwise and you’re right, it is clockwise, but it looked counterclockwise in the video. Anyway, thanks. Big help!
@relaxedguy2 жыл бұрын
Exactly what I needed to see. Dad left me with a few stihl and echo trimmers and I have a box of mixed parts I’m trying to make sense of before I end up going out and buying more stuff.
@Drigoon1210 ай бұрын
Had it not been for this video I would have missed the store closing today and just been co fused as to why they sold me a defective blade. Thank you
@nataliebliesener65474 жыл бұрын
Thank you! I've been trying to figure out how to do this by reading the instruction book. THERE'S an hour of my life I'll never get back! Total gibberish. I wish I'd searched for this video a lot sooner!
@stumplifter4 жыл бұрын
You and me both. The ‘manual’ from Stihl with the blade I purchased has 29 languages in it telling the user not to put there finger in a moving object.... nothing about installation.
@kimminis2 жыл бұрын
great video. thank you for taking the time to make it. amazing to me stihl doesn’t indicate which direction to mount the blade in either better blade marking or pkg direction. your video was direct to the point and clearly illustrated. great job!!
@AodhMacRaynall-dr1sf4 ай бұрын
Yep been a while since I used the brush blade. Needed a refresher so I do it right the first time.
@ryanshepherd64572 жыл бұрын
I want you to know i revisit this video a couple times a year because i can never remember how this goes. My brain locks up and i pull up this video to get a quick refresher. Everytime
@GWAYGWAY16 жыл бұрын
Turn the machine upside down makes it a lot easier as it stays put
@paulflute4 жыл бұрын
gravity.. so useful sometimes ;9)
@caitlinmachon40303 жыл бұрын
Sounds like Peyton Manning.
@randywilbanks80662 жыл бұрын
THANK YOU VERY MUCH 🤠 You're smarter than my local dealer
@garyadams2822 Жыл бұрын
Thanks. I’ve only done this about 10 times the past 10 years and forget everytime.
@USMCArchAngel035 жыл бұрын
How did people who didn't grow up with this stuff get anything done before these videos? Thanks the help!!
@alknaussprenger10223 жыл бұрын
by reading the supplied manuals
@user-co8uy5rb2s Жыл бұрын
@@alknaussprenger1022EXACTLY
@aaronhataway900513 күн бұрын
They heard thru the grapevine and learned from grandpa
@spreadgeorgia3 жыл бұрын
Thank you very much! Straight and to the point. Super!
@katyminot1400 Жыл бұрын
Just simple common sense instructions. That really helped me out.
@bvanzetti27554 ай бұрын
Thanks for the clear explanation and demonstration. How about something on the best way to file the chisel tooth blades? Stihl hasn't been much help.
@christopherpaysse933618 күн бұрын
Thank you for this video!
@tarponjohn Жыл бұрын
excellent, was able to work on with the advise given and swap blades ...cheers
@darrylsavage3704 Жыл бұрын
Very good and thorough directions thankyou
@tcport018Ай бұрын
Thank you for this!
@malcolmpalm4 жыл бұрын
Thank you, Brandon. That was a huge help. I had it all bass-ackwards.
@robsherron39206 жыл бұрын
Great Presentation. Very easy to see and follow.
@freebird72843 жыл бұрын
found the 5 seconds i was looking for, thanks!
@dallasfarms19073 жыл бұрын
Thank you so much. It worked. I was turning the washer wrong the whole time
@abdullahiali99084 жыл бұрын
Thank you so much Brandy. You made this so clear and helped us out a lot
@gbcbpb3 жыл бұрын
Thanks Brandon!! Your video was super helpful 👏
@alexhall7561 Жыл бұрын
OMG I so love you! Like omg my weed eater is awesome now. Thx!!!
@matedobrossy10213 жыл бұрын
Thank you for your clear instrunctions!
@MasterBojangles Жыл бұрын
Thanks, method still works for stihl fs-km brush/line cutter
@HLsab3 жыл бұрын
Thanks mate , from Australia.
@helenedugre6895 Жыл бұрын
Thank you ! Very useful and it’s done 💪
@rsimpkins1601 Жыл бұрын
just found a kick to curb stihl weeder...have the blade ..need adapter to put it on
@CMK-BigFoot-14202 жыл бұрын
Thank you! I was wondering how a heck you get the head off, since it's just spins
@briansims4365 Жыл бұрын
Thanks for making the video!
@skisunvalley662 жыл бұрын
Thank you so much!!! That's exactly what I needed to know. 🙂
@bsenalaska Жыл бұрын
Great tutorial!💯👏🏻
@brianhoult48284 жыл бұрын
Thank you sooooo much!!! Awesome instructions better than the manual
@wongelfski46814 жыл бұрын
What stihl model is it?
@stevenpena94853 жыл бұрын
Does it work for any model???
@tomlindsay39124 ай бұрын
If you turn the head upside down you can center and tighten the pieces much easier. Gravity is your friend.
@Response1667 жыл бұрын
Showed everything, good video. Cheers!
@brandontipton34567 жыл бұрын
Response166 thank you very much
@shirlenemckee85986 жыл бұрын
Great Video Presentation!! I think I have got it now.
@bellyacres78462 жыл бұрын
easier to turn it over - only need to hold the lock device in the hole, but the blade is easily centered - the other parts hold in place while you tighten the nut. less fighting = easier installation.
@shawn37845 ай бұрын
Good video
@oscar01922 жыл бұрын
In the past what I have found helpful if you tip the brush cutter upside down
@smallblockfuelie2 жыл бұрын
Thank you.
@expatconn72423 жыл бұрын
Where did you buy the blade and kit at ?
@thomasdove2908 Жыл бұрын
If I am correct it saying u can put these on a stihl fs 2 40 c Strimmer?
@stl7694 Жыл бұрын
Big Help, thank you.
@Jon17London Жыл бұрын
Great video
@MissCase5302 жыл бұрын
Excellent, straight shootin' video on exactly what you need to get this done. Explained in a way that even a monkey could do it.
@drkalowski2563 жыл бұрын
Thanks boss man. cpuldnt get my blade off!
@RaimoJackson Жыл бұрын
Thx 4 the tip
@embedyourself7664 Жыл бұрын
Thank, a great explanation!
@heatherodell56412 жыл бұрын
Thank you , very helpful 😊
@kt92303 жыл бұрын
Thanks so much for the video!
@jbly25574 жыл бұрын
Thanks my man! Great video!
@dansteiner8983 жыл бұрын
Why doens't Stihl tell you how to do this on the package???
@JC05016 жыл бұрын
What trimmer did you use this on?
@barqzrdavi4 жыл бұрын
0.07 kzbin.info/www/bejne/oKGue2CbmrF6q5I all stihl have similar heads
@mikek.39652 жыл бұрын
Good instructions, thx!
@user-xw4ou4it4l Жыл бұрын
Thank you 🇳🇴😄
@Rokonmattadk3 жыл бұрын
I have a Craftsman weed Wacker, what adapter kit should I use?
@juanluther11 ай бұрын
Thank you
@lanceblack8884 жыл бұрын
Great video! I think that’s an Allen key rather than a torque wrench. Thanks 🙏
@arnoldosolisjr75194 жыл бұрын
Torx...not an allen wrench bud
@dandersondevon22404 жыл бұрын
Very helpful
@emailsender31282 жыл бұрын
Great video.. not too fast, not to drug out
@petermaxine5895 Жыл бұрын
legend, thanks fella
@gregfrench23592 жыл бұрын
Will this blade work on my FS 70 CE?
@ahrimanmagic2 ай бұрын
When I try to tighten it just spins
@76tennessee Жыл бұрын
Has anyone had a problem with taking the nut off? I cant get mine to loosen.
@johnboy30894 жыл бұрын
Thanks borther
@thinkbanq4u5 жыл бұрын
Maybe because of the video, but what you're saying is clockwise to tighten appears to be turning counter-clockwise. Not a problem, just an observation. Also, I found your helpful instructional video searching on the Stihl FS 45 trimmer. Is this that, or, will the attachment fit on any Stihl trimmer?
@michaelapplewhite47155 жыл бұрын
And the rotation of the blade looks wrong , mine spins the other way
@engieerslider81174 жыл бұрын
It will not work on an FS 45 or 46. Has to be a straight shaft. I found out the hard way.
@regeniatipton19303 жыл бұрын
He said counter clockwise to tighten and is turning it counterclockwise.
@misadventureswiththemartys3124 жыл бұрын
Can you do this with any FS model of STIHL?
@mrbrightside1873 жыл бұрын
Works on my STIHL FS 56 RC
@jonse23 Жыл бұрын
Is that your real voice or are you doing a cartoon character?
@seamusblack5876 Жыл бұрын
Turn the strimmer upside down so gravity is working for you😂😂
@johnricciojr.5324 Жыл бұрын
Excellent
@TheMike5555552 жыл бұрын
Thank you!
@philliplanfre347 Жыл бұрын
Cuts weeds good.
@411sponge724 жыл бұрын
Thank you very much!
@mathewscammell8876Ай бұрын
Nuthin' to it!!
@donwhitehead45876 жыл бұрын
Excellent👍🏻
@HRDFK7941 Жыл бұрын
Thank you a billion 😂😅
@nenadnesamilosevic82543 жыл бұрын
Thank you man
@flashatm3 жыл бұрын
Thanks man
@nevermonday78973 жыл бұрын
My blade has no holes to insert the locking rod. The blade just turns when tightening the spindle nut. Yes, it’s a Stihl blade
@popvultureinc50072 ай бұрын
HAHAHA, flip it upside down, dude!
@kuldeepatwal1614 жыл бұрын
I have blade but pls tell me Where I bought that small tool
@nhhandyman4 жыл бұрын
for me - it came with the unit. He calls it a saw tool because it also comes with their chain saws.