Heewing F22 Raptor build video

[@jheath1968]

Setup on the tx would be great to see.

[@BuddyRC]

The channel mapping is straight forward AETR because of the stabilizer board in it.

[@roadstar499]

So will the board that comes with bind with xk or eachine radios...or would you need a multi protocol tx?...

[@tomaskir]

Can you please mix to mono or properly balance the stereo next time? This is not pleasant to listen to for headphone users :)

[@dward4644]

Sure-- I'm still learning this whole ADOBE thing !!!!

[@WJdriver000]

Im really struggling with this model. I cannot teach my self how to make a 3 mode switch on my edge tx transmitter. And I also cannot find where to do initial trimming of the control surfaces for a preflight.

[@MrLolman704]

is there a possibility you could do a video how to connect it with the "beginner friendly" fsi6 transmitter? (if its possible of Course), I bought this plane earlier this Week and build it without any problems, the gyro system works as it should but the setup drives me nuts and the manual is pretty much useless.. I would appreciate it greatly if you could show a simple tutorial since i guess im not the only one struggling to connect this thing with a beginners transmitter.

[@BuddyRC]

The stabilizer board only works with a compatible sbus receiver.

[@theoztreecrasher2647]

the stock Flysky FS-i6 is a 6 channel radio and will not transmit S-bus - only i-Bus which will not work with this Flight Control. It needs at least 7 channels and S-bus from the receiver. If you have a Flysky FS-i6X that will work with a receiver that has an S-bus output. (FS-ia6b/FS-ia6c/FS-A8S etc.)

[@parodyverse]

Will the PNP version of thos jet be compatible with a spectrum receiver? Are the servo intputs the traditional ones?

[@Ricksworldtv]

Is the rx compatible with Spektrum NX transmitters?

[@BuddyRC]

No, it is not compatible with spectrum

[@dutchloveRC]

cool lil plane tho

[@BuddyRC]

Yes

[@frankpantaleon6682]

Very helpful. Thank you so much, sir!

[@BuddyRC]

You are welcome!

[@ant-man1131]

I've tried every way I know to get this f22 connected to my ZORRO and it jus doesn't wanna cooperate LoL. It flies like its on rail with X6 radio but I know the control would be 3 timss better with the Zorro! Does anyone have any advise on how to set up properly? I have a new Zorro plus an R81 for S.bus. PLEASE SOME ONE HELP ME OUT PLEASE!!!!

[@BuddyRC]

Thanks for watching! Give us a call on our work phone and we can try and get you going 614-808-4488

[@ant-man1131]

@@BuddyRC the only problem I'm having is the motor won't turn on in manual mode. Everything else seems to be ok I think. It's a great flying little airplane with the X6 transmitter!

[@hatzmannhenk]

Can you tell me where the cg is located

[@BuddyRC]

right by the battery

[@leemiles3995]

Could I somehow use a dsmx spektrum receiver for this? If I could just use the AR400 reciever and use a bind plug to connect it to the flight controller that would be much better for me since I have a spare dxs transmitter

[@BuddyRC]

if you're going to use the stabilizing board spectrum receivers will not work. Only SBUS receivers will work with it.

[@vanzkid209]

Does a fs i6x work?

[@BuddyRC]

Thanks for watching! As long as its a SBUS receiver it should work.

[@dukehawaiian]

You can use a crsf receiver?

[@BuddyRC]

Yes

[@lf5133]

I was set for watching this video but the background music was overwhelming. Sorry I moved on.

[@theoztreecrasher2647]

The "M" key kills the dumb-as* Muzak. The Captions give the explanation without the Yank accent. 😉😊

[@JitenderSinghShekhawat]

Where can i get the plan in pdf. please advise

[@BuddyRC]

We do not give out plans for this aircraft