Budget 5.3 LS build (Cheapist you can do it!!)

[@jasons4790]

Appreciate the video parts list and links would be nice

[@adamcaballero8538]

Awesome I’m doing a 1980Z28 Camaro

[@johnbehneman1546]

I love it. A Totally Awesome Build

[@Chicagomoney86]

Great content

[@johnbehneman1546]

Please keep us updated

[@613HalfwitGarage]

Do you have a link for the harness you bought?

[@davea5113]

Hi Landon, great video. Do you have the manufacturer or part # from Amazon for the wireharness. I am going to use a 4L80e tranny and I am finding it hard to get a harness. Thanx

[@LandonBooker17]

www.amazon.com/Standalone-Compatible-1997-2006-Transmissions-Throttle/dp/B09PMJ3JPK/ref=asc_df_B09PMJ3JPK/?tag=hyprod-20&linkCode=df0&hvadid=647337651596&hvpos=&hvnetw=g&hvrand=5064128224971577559&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9002599&hvtargid=pla-1664689407505&psc=1&mcid=acfe6b5a9876345283e55ca5535074bf

[@davea5113]

Thanx Landon for your help, there must be 100 different harnesses on ebay & amazon.

[@LandonBooker17]

@@davea5113 that harrnes should work for your setup

[@davea5113]

Sorry, I ment to say, thanx for pointing me to the right harness because there are so many to choose from, thanx again.

[@LandonBooker17]

@@davea5113 just make sure it's the right year for your motor

[@johnbehneman1546]

Thank you so much

[@sXvoutlaw]

Good video

[@عليمعادالغديان]

stock harness not hard only you need to remove the starter ild prefer the original

[@glennmanchester5696]

The cheapest and best way to do a rebuild is to not touch the bottom end at all they say not to touch it even w over 200 thou on it when you look at the main and rod bearings they are pristine unless someone ran it w no oil also the cylinders still show the cross hatch on them the robots at gm know exactly when to torque what bolts and what to torque them to and they last forever if you dont touch them so all that money on the bearings etc could have gone intto a cam and springs a timing chain headers and send it thats how you do a cheap rebuild not at all and it will stay together just as long as your rebuilt one will even the oil pumps dont wear out a new o ring on it and thats it anyone who tears apart a good L.S . Motor and puts bearings in it should not be doing it unless they are building a full race motor or something lots of guys take a boneyard motor slap a turbo to it and make lots of hp and it lives a very long life

[@mason5540]

I agree. def should upgrade the cam and valve springs. and leave the bottom end alone

[@mikefew4232]

You should put links to the parts you used.

[@randallvaughn9318]

Dude! 140,000 is a NEW engine. I'd leave the bottom end alone

[@mason5540]

yeah

[@chasef6275]

Should of never touched the bottoms end you can pull 200k miles motors port the heads csm and intake and boost at 800hp

[@johnwarren737]

What ebay harness did you use ?

[@عليمعادالغديان]

you try the fly wheel my if not good do as me for nissan patrol gear iused truck fly for clearance also custom adapter

[@kaspera2577]

Do you play no limit drag race?

[@LandonBooker17]

Yes

[@dustinclemons1099]

forgot to mention all the accessory's

[@mason5540]

add 2k lol

[@عليمعادالغديان]

icould go cheaper just make sure oil pressure ok then send it

[@mnicovic123]

Where did you get the harness ?

[@LandonBooker17]

Amazon

[@teabag402]

​@@LandonBooker17I got a Amazon harness as well, drove me half crazy lol. Trying to figure out why my motor was running all sorts of bad. Turned out the harness was pinned way wrong. I figured that out after a good 4 months of "testing" until I finally ripped out the harness and checked the pin outs. Just fyi in case you have issues watch the pin outs

[@treyhayenga437]

any links for the parts?

[@michaelatkin9649]

I hope that was a typo

[@edgarparrish3457]

Is it for sale I’ll take it if it is

[@javiertrujillo1916]

When cam bearings show copper don’t mean they are trash 😂

[@henriquehernandez6]

Why is that ? 🤔

[@javiertrujillo1916]

@@henriquehernandez6 do your research you’ll see

[@gordocarbo]

@@javiertrujillo1916 They need changing out period if copper is showing

[@gordocarbo]

@@henriquehernandez6 As you see he has no answer...hes dead wrong. lol

[@javiertrujillo1916]

I mean whatever you say I’m running 100.000 plus miles after cam swap and bearings was showing copper whatever makes you sleep at night change them I can care less