BUDGET Harbor Freight Jeep Tool Kit

[@DIRTROADCRED]

Amazon Alternatives: (In case you don't have a Harbor Freight Near You!) Ratchet: amzn.to/46XFypW Sockets: amzn.to/3tZpeX0 Breaker Bar: amzn.to/47jEvQJ 18mm Socket: amzn.to/3FQoyFS 19mm Socket: amzn.to/47eh2B7 21mm Socket: amzn.to/3FSaonH 22mm Socket: amzn.to/3Muw9Oo Plier Set: amzn.to/45ZNq90 Trim Tools: amzn.to/3so63Wr Cable Ties: amzn.to/3SrdlTM Electrical Tape: amzn.to/3SpvHVd Magnetic Lights: amzn.to/3FMq8c3 Driver Set: amzn.to/470rmfB Screwdriver Set: amzn.to/3u1lbcN Tool Bag: amzn.to/49p7EMs Spark Plug Tool: amzn.to/3SqJpas Extension Set: amzn.to/463ldOq Socket Adapters: amzn.to/3MufKJE

[@JoeSmith-nu8oo]

You're a great JEEP guy going through all this trouble to show other JEEP owners some money saving tips for tools and stuff that will do the same job as more expensive options. Hope to make some of the JEEP shows in 2024 as long as they're not too far away 🤞 wish me luck.

[@DIRTROADCRED]

Appreciate the nice comment! We plan on hitting a bunch of shows next year

[@JoeSmith-nu8oo]

@@DIRTROADCRED The Smokey Mountain Jeep Event and Jeep Beach are the two best options for me in 24 I think.

[@March1966]

Can of PB Blaster is a must for me. Midwest winters equal rusted bolts and nuts and it works.

[@austinp3459]

Coming from the BMW world I’ve found it essential to carry a computer diagnostic scanner. You can better judge how major or minor a light on the dash is to determine whether to push through or call a tow truck. Dash lights want to scare you to go to the dealer, but the codes are often benign or unrelated to the situation at hand but you’ll never know without a scanner!

[@zbow1974]

i use torque pro and a Bluetooth OBD2 scanner, just use your cell phone to check codes, good in a pinch like you suggest.

[@Asymmetrical.athlete_]

I just bought my son a jeep for his 16th birthday, I am tossing in a bunch of stuff for him (stuff we all wished we had as a kid) and I watched this video yesterday. I also went to Walmart yesterday and as I was looking around I noticed that their wrench and socket sets have the 18mm...I know it's not snap on but it's for a 16yr old and if it get stolen of lost it's easy to replace.

[@joshsmith8612]

Harbor freight has a nice rubber mallet I keep in the jeep, great for sway bars and is the most used along with my air down tool. Also like to keep a magnetic parts tray and volt meter on hand.

[@pvg44]

Do you have the harbor freight list you can share?

[@Things2Delete]

On the 3 piece set of "Handy Hex Keys" you can use a combination wrench on the shaft of each bit to get a little bit of extra torque to break the hex bolt loose. Great video guys 🤘😎

[@teedeerolo]

Thanks for the video I am glad that you show Harbor Freight tools. awesome video

[@TheBerkeleyBeauty]

Y’all made it possible to put together TWO of these tool kits, and still have money left for a decent meal for 2, for the price they want for the ready made kit. Nice job guys. 👍🏽

[@DIRTROADCRED]

Thank you! 🙏

[@Danielxperez14]

Where did you get the table of contents for the Jeep tool kit? I expected a link

[@mattskillman]

Great video! I think it's imperative that everyone has some basic tools in their vehicle, should any issues arise. Some people may knock Harbor Freight, but for as little as the tools may get used, and are more likely to get lost on the trails, having something "cheap" is better than having nothing at all. All of our Jeeps have a basic roadside emergency kit in them that includes a 12T bottle jack, chock block, torque wrench, sockets and extensions. If I ever have to change a tire on the road, I have everything on hand to do a full tire rotation should I want to.

[@kmslatton]

Just came across this video. I did the same thing last summer. Went to HF and built a nice inexpensive tool kit that lives in the Jeep. If it gets stolen I'm not out a ton of cash. After watching this I need to head back to HF for a few items. Really enjoy the channel. 2012 JKU 2.5 inch Teraflex coil lift 285x70xR17 Nitto Ridge Grappler

[@explore_off_road]

This is a great one. Some may get all pissy cuz of the brands, but we aren't full time Mechanics, so these will last. And especially if it's tools JUST for the Jeeps. I have a specific tool roll and socket set that I load in the Jeep, then others just for home. The only thing I would say, is that the tool roll would have been a great idea. Just for organizing and not having to dig around. But a tool roll can get pricey, so this bag you got is a good start. It's exactly where we all started and then just fine tuned over the years... I actually just got my tool roll a few years ago. So I was a "Bag Man" for quite a while ... Many still are.

[@BionMTG]

I did get a 20th anniversary 392, and although the mopar tool kit is hella over priced, it's just kinda cool to have. I have only been using mopar branded parts (warn included) for my upgrades, and damn they are proud of their parts, like the lights for example. That all being said, it's my bucket list rig, and will stay with my for a very long time / rest of my days (finger crossed haha), so I figured, build it the best that the mopar folks engineered, and the dealership can't ever complain that a random company's part potentially caused an issue.

[@DIRTROADCRED]

Totally agree!

[@MartinStockel-k6f]

The proof of the tool quality will come when you do break down on the trail. There is steel and there is crappy steel. I can't stand when I am pulling hard, and the wrench breaks and I smash my hand. Would like a follow up video after you have used these tools for a while to see how they holdup.

[@xtek13]

I just purchased the Home Depot Husky 290 piece set $170 for my JL. Maybe you can review it. Seems like a decent organized set. But I was thinking of making a tool roll out of common Jeep tools from it. Then I have some extra money for other tools.

[@nathanlewis3462]

I been running a craftsman bag nust like that for mobile tools for years now. As i get nicer tools for the garage the older stuff goes in the bag and i mobe it from the jeep to the tow pig depending on what were doing.

[@jlautomotive6349]

I know I say it a lot but again you guys absolutely are killing it!! As a new person into the off-road world I appreciate this video and didn’t know I needed a lot of this stuff so thank you so much for the video and the idea of stuff you need when wheeling!! As always keep up the amazing work!! 👍

[@Scottiegillespie]

Thanks, Matt and Ryan . What a fantastic informative video. This was greatly helpful and I will be following your suggestions to get my tool bag together

[@DIRTROADCRED]

Thanks for the comment, Scottie!

[@dl9955]

Thanks Matt great helpful video for the novice tool bag. I carry way to many tools including lubricant, oil, rags, Milwaukee 18v 1/2" impact, Fluke multi meter. 12 gauge wire and connectors, Milwaukee 18v sawzall to cut down trees and a Milwaukee battery charger, bottle jack, knifes, 120v extension cord, 100 ah lithium battery, 10amp battery charger. 500 watt inverter and my list keeps going. LOL We overland for weeks at a time so we take a lot in our JL. Great video as always thanks

[@DIRTROADCRED]

Thanks for watching! We are constantly adding new tools as well

[@jbjlock26]

I picked up a 1/2” drive breaker bar at HF, and a 22mm Tectonic socket on Amazon so I have a reliable wrench for changing a tire. I tucked it into a piece of pipe insulation and it can fit in the jack storage bin. Harbor Freight is really expanding, adding new stores almost everywhere. The lifetime warranty and improved quality is making it my go to tool store. The suggestion a Lou of people are making about WD-40 is a good one. I also carry a couple pieces of 12 and 14 ga primary wire, along with some crimp on connection, plus a simple voltmeter can be invaluable. (Probably more for overlanding than just a day in the trails)

[@DIRTROADCRED]

Right on! Thanks for the comment

[@CMDR-Cody]

A few extra things to consider. A small hack saw, files, and a rubber mallet. Oh and duck or gorilla tape. One time my window regulator died with the window in the down position while I was on a week camping trip and it was raining. I detached the window from the regulator and then used gorilla tape to hold it in the UP position and it held for like a month until I got a new regulator.

[@petersantulli2337]

Great video. My rig tool bag is mostly Harbor Freight. As you said it’s not everyday use so why spend the money. Sure be nice to carry SnapOn but not worth it for me. As far as the extendable ratchet I have it as well and love it. I also have the 1/2” drive one in which I used at a factory hangin molds that weighed more than my 2 dr jk without failure. Few things I wouldn’t cheap out on; breakable razor get a Stanley quick change stronger, electrical tape always get Scotch 33 the others don’t hold up, lineman pliers get a pair of Klein the other work but the cutting edge is awful. Those are from helping out my dad who’s a master electrician and found those are not work cheating out on.

[@DIRTROADCRED]

Thanks for the suggestions, and comment!

[@PamFurlong]

Please send link to tool digram you went shopping with

[@charlesnickell7257]

My number one tool that I cannot leave the house without. Is my ryobi battery powered air pump it gas lasted me 5 years and 4 different jeeps and 1 nissan frontier pro 4x

[@DIRTROADCRED]

That's a good one!

[@alexjohnson8850]

The ARB air down tool is a must-have for me, along with WD-40, socket set, air compressor, zip ties, etc.

[@DIRTROADCRED]

Absolutely!

[@leemen]

I’ve got to admit I’m a bit of a tool snob. I travel with way to many high end tools that I never use on the trail. But just in case anything ever happens I’d be able to rebuild a transfer case or differential on the side of the road. Lol

[@DIRTROADCRED]

haha!

[@zbow1974]

like you said your not using it every day, in fact RARELY using it so Pittsburgh all the way, keep a $199 dollar Pittsburgh tool set i got on black Friday in my trunk along with my jack, jack stands and a set of metric and standard ratchet wrenches, breaker bar, and some other assorted tools in a small HF bag. used a few times and not a single tool has failed me yet, think i have $400 in everything including the jack and stands, made a box the size of the floor space with lid so i dont lose any storage space and it holds everything nice and neat.

[@DIRTROADCRED]

Very nice!

[@LukeEdward]

For a breaker bar, I carry a collapsible lug wrench for the last 20 years. Mine was a “Gorilla” band but there are plenty out there. I’ve stood on that thing and it still works perfectly. Also, add a can of WD-40. Lay all your tools out on a towel and FOG EVERYTHING! Fill the bag and throw the towel over everything in the bag. I’d rather deal with wiping a film off my tools with the rag, than rust. And, let’s be honest, a cheap $25 OBDII scanner in a Ziplock can also be of assistance.

[@DIRTROADCRED]

Good point! We gotta wheel Luke!

[@TwoFeatherChannel]

have you seen the new ICON Ball Joint Press that harbor freight is coming out with? it has the locking cups like the Snap On brand has for a lot less.

[@DIRTROADCRED]

I haven't! I'll have to check it out. Thanks for the comment

[@RobHaag71]

Some of the tools, like the wrench set, may have been better sourced from Home Depot using the Husky sets especially egged there on sale

[@mcchillz]

One of the most helpful videos you’ve done. Thanks a ton!

[@DIRTROADCRED]

Appreciate it!

[@albertkelly9673]

Reacharble Magnitic Flash light Saved me more times then i can Count

[@davidjoe2600]

This is awesome! Thank you for putting this together!

[@pricekeene511]

I work on movie sets as a set dresser .. this is also a very basic start of a set kit and I can tell you from Experience that Alle wrench set is horrible at least if trying to use on a semi regular basis. I would also never pay that much for the Jeep set. Honestly you could probably get it cheaper at Lowe’s. But have a long lasting set

[@DIRTROADCRED]

Thanks for the tips, we actually got sponsored by the tool company who makes the Jeep kits and the quality is great, I am also a fan of the ICON sets from Harbor Freight!

[@ahmednesbitte4906]

Nice video, very informative. Thank you for sharing

[@jlsarge426]

I take Dewalt 1/2" impact with sockets.

[@DIRTROADCRED]

Right on!

[@billveder1071]

This was a good video, I appreciate it. I would rather buy all of these tools for half the cost plus I prefer the tool bag over a tool pouch. IMO ratchet straps are crucial tool to have on the trail.

[@Dmh06178]

Nice viewer rig! Great Harbor Freight tool ideas

[@adrian24392]

Well informative video. Heading to HF soon!

[@bucktoyota]

The adjustable 1/4-3/8 drive ratchet is crap. Fist use the plastic handle broke. Then when using the ratchet.. the direction lever always flops back and forth. Plus when you are trying to pull a bolt fast, the extinction slides out on its own and that sucks in a tighter space. And finally the 4th time I used it. I snapped the ratchet mechanism breaking loose a caliper bolt. Not worth 2 bucks its you ask me.

[@nathanlewis3462]

So the 392 XR at the end... what part of the XR is still on the jeep? Asking for a friend...

[@TolcomOhio]

The fender extensions... lol😅

[@nathanlewis3462]

@@TolcomOhio $6000 fender extensions.

[@TolcomOhio]

@@nathanlewis3462 when ya replace just about everything else. Yup. 6k worth of plastic.

[@SeanHavlik]

No pliers can replace vice grips.

[@minedustry]

What's 18mm ?

[@johngrant1337]

Good video and , thanks

[@toddhall3720]

Great content, thank you

[@DIRTROADCRED]

Thanks for watching!

[@primaljackal]

Those Allen key sets are hot garbage. I bought that exact set and they are not holding up at all. If you use any of the keys on the larger side, the entire body basically twists (cheap plastic) and the keys come loose. This is one invention that didn’t need to be invented. Normal L-shaped keys are fine.

[@JoeSmith-nu8oo]

My vital tool is Dr Pepper😝

[@DIRTROADCRED]

lol hydration is key

[@321jono]

I'm still harassing HF to sponsor y'all. But I don't get any response. They really have to see how much you use them. This is huge. They could even design a Jeep kit.

[@DIRTROADCRED]

SPONSOR US HF!

[@xtina818]

*Cries in Canadian Takes trip to Princess auto instead

[@belleviewaquatics8435]

where this kit will cost $500 instead of $200, we get it up the ........

[@TwoFeatherChannel]

Princess Auto, what a name. does all the tools come in Pink?

[@long-jeep]

Yeah, but you get tools with the name _Powerfist!_ 😆

[@DIRTROADCRED]

haha

[@happy_jcg]

No duct tape?!?!😂

[@rjet43]

sorry harbor freight has goodish stuff but their tools suck