BUILD PANEL SAW IN 10 MINUTES

#buildpanelsawin10minutes #woodworkingdiy #jhonarief
okay guys today I just rewind on the past project but this time I combine 2 parts of the video into 10 minutes video as requested, but if you guys need step by step with the plans inside the video, please check parts 1 & 2 on this link below
PART 1 panel saw: • THE ULTIMATE PANEL SAW...
PART 2 panel saw: • ULTIMATE PANEL SAW P...
hope you guys enjoy it
Support me on PayPal : paypal.me/jhonarief
Tool affiliates :
CLAMPS
1. drill pro guide rail quick clamp 160mm x 60mm
sea.banggood.c...
2. drill pro guide rail quick clamp 200mmx60mm
sea.banggood.c...
3. standard jaw quick clamp 300mm x 60 mm
sea.banggood.c...
BISCUIT JOINTER
1. HILDA BISCUIT JOINTER 760 Watts
sea.banggood.c...
ELECTRIC HAND PLANER
1. TOPSHAK TS-EP1 710 Watts
sea.banggood.c...
2. TOPSHAK TS-EP2 900 Watts
sea.banggood.c...
CNC LASER ENGRAVER
All product MAKEBLOCK xTOOL:
store.xtool.co...
xTOOL D1:
store.xtool.co...
xTOOL D1 on amazon:
www.amazon.com...
LASER BOX PRO CO2:
store.xtool.co...
XTOOL ROTARY ROLLER accessories:
store.xtool.co...
email:
[e-mail]
FB Page:
/ workshopjhonarief

[@cburvil]

Hope I don’t sound too over the top for a diy video, but to me this is brilliant work. The way you’ve combined so many skills with so much ingenuity is, well, inspiring stuff. Many thanks.

[@jhonarief]

Thank you sir

[@davidmuresan1735]

Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.

[@scottslotterbeck3796]

Clever and effective. But it's way more than 10 minutes. Unless these are metric minutes?

[@asanders364]

I’m pretty sure he was meaning the time length of the video as compared to the 2 original full length instruction videos.

[@cybyrd9615]

This isn't as precise as the JSK video

[@jakerivera4913]

Great idea!!!! but I’m thinking 10 minutes setup🤔🤔 maybe after you measured and cut all the wood and tubes, drilled out all the holes on tube, and grind the grooves on bearings, measure the length on cable, then put everything together. Yes then I see 10 minutes to install on wall. 🤣🤣🤣

[@ildefonsogiron4034]

​@@cybyrd9615JSK tools and materials are not so easy to get, and usually more expensive. This is a more down to earth approach. Regards 👍

[@lohikarhu734]

JSK does fabulous work, but, yes, components are not always inexpensive or easy to find...still..

[@oscarbaruch3086]

I’m impressed, I noticed the skateboard Bearings wow, smart man. I followed your lead , I’m not finished yet but it’s coming along great. Thanks for your innovative ideas

[@davidmuresan1735]

Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.

[@xConundrumx]

Pro tip, or more to the point, from experience: Don't use an adjustable square to test for 90 degree angles. The 'adjustable' part means they are frequently anything but accurate.

[@rinzler9775]

Yes - I wrecked a couple of projects using one of those out of square.

[@leehaelters6182]

I do keep faith in my Starrett, and I always release the tension on the locking nut before moving the blade, keeping it from contacting the head as I slide it.

[@nelsonpergui7859]

Estimado Señor Arief, gracias por compartir el proceso de construcción de esta ingeniosa y útil DIY PANEL SAW. Espero construir la mía tomando como referencia sus instrucciones. Un enorme abrazo y espero seguir aprendiendo a construir más herramientas. Gracias!!!👍

[@davidzoller9617]

Thanks for telling what you really need to have and have to to do in detail. I'd like very much to have a panel saw. It saves you a lot of space and makes cutting plywood a piece of cake. Where I learned cabinet making, there was a Striebig - 30 years ago.

[@davidmuresan1735]

Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.

Hello my friend, very nice project. It's fast and convenient. you did a good job. I would congratulate you. Thank you for sharing the details. This panel will be very useful. See you. Stay healthy and happy. Big greetings.

[@davidmuresan1735]

Do you like my "Parallel Guided Power Saw?" seen on you tube. Do you wish to join me to manufacture it. On the video you may see some pyramids I cut with my saw, which cannot be easily cut with another saw. The manufacturing company does not want my saw, so we have to start our company to make it.

[@flashwashington2735]

Well conceived, executed, demonstrated. Thanks.

[@KodyKimani]

That'd take me 10 years lol... but brilliant - well done! I'm only a beginner!

[@markkoons7488]

Good project. Especially like your sound control.

[@pthiyaga]

Fantastic. No way this can be made in 10 minutes

[@deemdoubleu]

10 minute video

[@boxdor100]

Nice work Dude It S good and affordable design but apart from this well …nowadays u can find linear bearings at good prices almost everywhere inda world …much easier to set instead of drilling and setting all that materials bought recently a four kit 20 mm bearings and end brackets under 30 euros for a similar project Thanks for tips !!!

[@marceloariasescultor3568]

Gracias!!!! Saludos desde la Patagonia Argentina!!

[@rb-ex]

good work here and a nice result. especially inventive was the way you milled the outer bearing races to accept cable for the pulley system. i would like to have seen a dust control solution. for me engineering a shop tool begins and ends with dust-control. a small suggestion re those toggle clamps. they are usually absurdly cumbersome to adjust. i silver-braze nuts on mine and replace the threaded spindle with a length appropriate to the application (can use ordinary stainless hex head bolt and mortise and epoxy in a small wood pad with sandpaper on the clamping side)

[@user-jn5zv3xr5l]

Люди,как же я вас уважаю😊

[@philippelupien7109]

Brilliant! Thank you

[@BobHolster-om8rf]

NICE JOB. BUT IF I COULD DO ALL OF THAT CORRECTLY. I WOULD BUY ONE READY-MADE.

[@jonnynguyen9015]

Love your videos.. GREAT JOB

[@user-qf6vd5fd9n]

Круто 👍👍👍

[@joeyprather4739]

Great

[@PlywoodCreative21]

Terimakasih share videonya

[@manoharsagunthalla9215]

Very good and detailed video. Thanks for sharing!

[@guidoguido8440]

Ty so much for this video man

[@cyclopwoodcrafts]

Superb indeed guru 👍👍👍😍

[@crossgrainwoodproductsltd9230]

I like this idea, but it isn't unique. JSK made one exactly like this one but used linear rails for his and when I built my 6ft Circular saw cross-cut jig I too used the linear rails. I originally bought a couple angle iron and 1/2" square tubing to keep the angle from sagging. Ultimately I used that steel for another project and bought the linear rails, block bearings, and ends. It slides with just a tiny push from a finger.

[@piyushtalegaonkar2940]

Yes but I think this one will be more rigid inspite it's huge length

[@DavidNitzscheBell]

also, you should say "10 minutes time lapse" because your title makes it sound like you can build it in 10 minutes, real time.

[@rinzler9775]

No matter what I did, it took me at least 11 minutes.

[@molambo]

For those who have space it's wonderful, but for those who don't have space and few resources?

[@BlackBuilder]

Bang sori mau buat gituan, dimensi roller dudukan cs nya berapa tu bang?

[@nivaldojosedomingos2277]

Um otimo trabalho

[@GraphFxRobins1]

Where did you purchase the hardware like the square tubes at 3cm x 3cm x 150cm?

[@michaela4141]

Is this only for crosscuts? Can it rip also?

[@user-ss9er2kg9w]

10 minutes for colecing material an may be not enough 😅😅

[@vmoutsop]

Saw is set in wrong direction, your cutting front to back instead of back to front. Blade is essentially spinning backwards, which is fine for plastic but not wood.

[@4Fixerdave]

And the results is that the tear-out is against the backing board, and thus reduced. Yes, you can run a circular saw backwards, and to good effect. It's just a lot safer on a sled.

[@toraryugraphiperso3411]

hi! Did you have the plan for this? what kind of square tube is it? aluminium? steel?

[@jhonarief]

I use steel square tube

[@toraryugraphiperso3411]

@@jhonarief thanks!

[@sachinsutar7680]

You have done wonders, which country do you belong to?

[@jhonarief]

I'm Indonesian sir

[@brianbatten3664]

Nice work but the saw is running backwards

[@ivantorr]

Are there plans to build this, as well as a hardware list? Very nice job!!!

[@jhonarief]

Thank you Ivan, the plans is only inside video, and the material for this build is just simple material I'm sure you will find this on your local hardware store

[@tomwilhelm67]

I worried you are “climb” cutting, a potentially aggressive way to have the saw ripped out of your grip or to have material sucked into the saw.

[@wolfgangkonrad37]

sir...maybe..your fine saw - work in the wrong direction !?..but nice work !!!🤔

[@alessandrosuppini943]

Hi John, dis tou build the angle grinder jig to use it for straight cutting or is it something you bought? By the way I love watching your videos 😄👍

[@jhonarief]

Thank you so much, and Yes I bought that angle grinder jig few years a go

[@alessandrosuppini943]

@@jhonarief can you send me the link where I can buy the jig for the angle grinder?

[@jhonarief]

@@alessandrosuppini943 go to amazon and type the keyword "angle grinder support base"

[@jhonarief]

@@alessandrosuppini943 or angle grinder stand cutter

[@jhonarief]

@@alessandrosuppini943 RO&LY 100-125 Angle Grinder DIY Angle Grinder Stand Grinder Holder Cutter Support Bracket Holder Cutting Machine for 100/115/125mm Angle Mill www.amazon.com/dp/B07NTXMHC1/ref=cm_sw_r_awdo_navT_g_FZS53MFEC5BZ8BP05V3Y

[@barbarianatgate2000]

This is a nice build, but that's not how you do a 5 side cut to check for square.

[@misterfee6467]

lmao 10 min but u changed ur shirt 3 times

[@willianarguello4678]

Tanto gasto para tan poco atributo. Ya tenias con que hacer eso....vi tu radial de banco.

[@su-mu]

10:50

[@ginanjarrahadian]

Habis berapa kang buat instalasinya di luar circular Saw?

[@jhonarief]

design yg ini bisa dibilang sangat terjangkau dan mudah dihitungnya misal plywood 15mm1 lembar mdf 9mm selembar kayu balok mini t track 3 x1 mtr besi holow tebal 1.8mm 1 lonjor=6mtr 125rb bearing 608= 20 pcs harga per pcs rp1800 silahkan dikalkulasi

[@KentangGoyeng500]

Mantep tenan pak 👍👍😊

[@helmi_varotex]

Melu nggawe ah

[@jhonarief]

cuuss ra dhe...

[@ericjensen3639]

10 minutes?! No f'n way. It is 10 minutes just to thread all that stuff together you show at the 2:00 mark.

[@alexblokers4762]

Itu gerinda potong berapa inch om yg digerinda stand

[@jhonarief]

kebetulan punya gerinda bosch versi lama yg 5 inch mas 125mm

[@alexblokers4762]

Mantaap om

[@ucdailoi]

It is likely that this will take 10 hours not 10 minutes..

[@DavidNitzscheBell]

intro: here's what you need for this build. video: here are more things that I didn't mention before. and what was happening from 4:44 to 4:52?

[@jhonarief]

that time line I just making blade track so I can determine where I'm going to place the T track sir

[@mightyporky]

10 minutes?

[@septimuspretorius250]

10 minutes!!!!!!??????

[@user-mi9kv6wk5k]

too fast

[@wmlaveck]

Why is it that everyone is losing the ability to talk while making videos?