Рет қаралды 20,427
Build The HASEGAWA 1/24 TOYOTA 2000GT
#toyota2000gt #modelcar #scalmodeling
Index
0:37 Chassis
4:09 engine
12:43 Body Painting
16:26 Inside The Car
19:38 Finish Work
21:49 Figure
25:55 Complete Photo
HASEGAWA 1/24 TOYOTA 2000GT Super Detail Model.
This time, I made the Toyota 2000GT, which Japan is proud of.
This model is a limited edition with the addition of an engine made of metal and resin called Super Detail.
The main body itself is diverting the existing body.
* Precautions for assembly
engine
Both resin and metal parts can be easily assembled.
I feel that the resin parts are a little distorted, but it is within the allowable range.
When installing the resin parts on the chassis, erase the round extrusion marks on the chassis side.
All you have to do is to match the air cleaner of the engine with the intake port of the resin parts, and to ride the engine body on the lower part of the engine of the chassis without distortion.
For the detail improvement of the engine such as piping, I referred to the pictures on the internet.
Body installation
The tip of the main body is divided into upper and lower parts, and I think that it is normal to glue it first to erase the adhesion mark, but if you do so, a part of the added engine will interfere with the chassis and the main body. The main body does not fit in the chassis.
I scraped off the parts at the tip of the split body.
If you don't like it, you'll need to remove and paint the seams after assembling all the paint in this area.
There is a bumper around the seams, so if you glue the bumpers together, the seams will be less noticeable, but you can see them a little.
It is attractive that the body of Toyota 2000GT is integrally molded. It's an invisible part, so let's cut it.
Painting
Although it is white, I made the bonnet yellow and drew large and small red lines.
At first, the bonnet was also painted white, but if you draw a red line on the body of Hyoro Naga, it will look even longer visually.
I added the effect of cutting the red line before and after the bonnet with the yellow in between.
Rather than weathering, the white color of the old car has been reproduced.
Figure
Until now, plastic model figures have been poor, but with the introduction of 3D printers in the plastic model world, the details have improved dramatically.
Moreover, it is cheap.
I want you to release more and more 3D printed figure plastic models.
Next, I will make a MAZDA COSMO SPORTS !
Let's meet again!
thank you very much.
* HASEGAWA 1/24 TOYOTA 2000GT Super Detail Model.