If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
@jamesventress5200 Жыл бұрын
Awesome as always Wayne
@njdevfan20 Жыл бұрын
Nice
@Zammpie Жыл бұрын
Nice job! KUTGW!
@bobbybates2614 Жыл бұрын
Hi wayne lights camera action lol
@mattalki Жыл бұрын
I liked that you taped everything down inside. That was actually clever. One suggestion? put some hot glue over the LED tape. The backing does fail, and they do work their way loose. I've found out the hard way on that one. I love watching these vids, as it's neat to see all the different ways people go about the build. It increases the tools in the belt.
@MartinFutter70 Жыл бұрын
I think every modeller over the years has thrown a part away without double checking... Good soldering skills, you make it look sooooo easy!
@mikeking2539 Жыл бұрын
Everybody does,m I can't solder to save my life... lol
@MartinFutter70 Жыл бұрын
@mikeking2539 I still have the solder burns on my hand from school, and that was 1985/86. I'm not sure I'm keen on picking the 'iron' back up again 😀
@tachi98lep Жыл бұрын
Nice work on the Saucer section!
@suddeneye9836 Жыл бұрын
You're the best Wayne. So so good.
@michaelbaldassarre838 Жыл бұрын
Wayne, Really looking good! Suggestion, Put a couple of drops of CA at the corners and in the center of your light strips to make sure they stay in place.... The heat could loosen the adhesive on them, Just a thought. Loving this build !
@Joepacker Жыл бұрын
Great work Wayne, the only change I would have made is connected the strip LED in parallel vs in series like you did. If something goes bad on one of the strips they all go out vs if they are parallel if one goes out the other ones still work.
@F22ERaptor Жыл бұрын
Looking really, really good! 😀
@milanondrak5564 Жыл бұрын
It's Federation Friday already! Nice work so far Wayne old buddy.
@nigelvickers6496 Жыл бұрын
It is certainly looking good Wayne ⭐️⭐️⭐️⭐️⭐️
@chrisgwilliam9893 Жыл бұрын
👍🏻 Happy Friday
@VarosVapor Жыл бұрын
Excellent work Wayne, love this build!!
@steve1315 Жыл бұрын
Looking jolly nice sir .😎😎👍👍
@sammy_dog Жыл бұрын
looking good Wayne
@Vondoodle Жыл бұрын
Wow - those cob strips are amazing
@swpowell1226 Жыл бұрын
You really should light the phasers and thrusters. It will make it look much better. Can't wait to see this finished. It's going to be amazing.
@WorldofWayneUK Жыл бұрын
Thrusters are lit.
@msrushing989 Жыл бұрын
I would recommend connecting the led strip tape in parallel that way if one strip fails or the wire comes loose you wont lose all of the lights. I have had a strip of led tape fail on me in the past but it was in a model that could be opened back up pretty easy. It will take a bit more wire to do, but it will give you some redundancy.
@WorldofWayneUK Жыл бұрын
I have linked both ends so if one fails I should still have enough light hopefully to light the windows
@timwhalan6417 Жыл бұрын
👏🍺👍🏻
@eddywells5689 Жыл бұрын
Great vid 💪💪🍺🍺👍👍🐕🐕
@ohmydinosare Жыл бұрын
really enjoying seeing this take shape. I'm a little confused - maybe this was explained earlier and I forgot - as to why you needed to sand off the phasers and then stick new ones on. Were they incorrect as sculpted?
@WorldofWayneUK Жыл бұрын
Yes. The phasers base was flat to The saucer section. In the model it was raised
@ohmydinosare Жыл бұрын
@@WorldofWayneUK ah, that makes sense then
@gb1701 Жыл бұрын
Awesome job. I'm just wondering though for those of us who are complete novices to model lighting and have no proper tools, do these light strips come preassembled? I'm really only wanting to light up some of the window spaces so the interior compartments can be seen better, but I need something that is basically idiot proof and not too expensive. You also mentioned Aztecing yours and if I may ask where you purchased the decals and the cost. I figure you bought them not too long ago and yet everywhere I've searched they are either out of stock or cost almost as much as the entire model kit itself which is ridiculous.
@WorldofWayneUK Жыл бұрын
Yep the Aztecing details can be expensive. The light strips are easy to install. They need a minimum of 12v and it's as easy as soldering the + an - to the wire.
@Zodosh1 Жыл бұрын
Hi I know this is for a different part of the ship . Instead of an led strip for the warp nacelle. What about a led panel that is used in automotive?
@WorldofWayneUK Жыл бұрын
Yep could work. I will have a look at that when I get to the nacelles
@Montebann Жыл бұрын
Looking really good, however I think the phaser banks should be above the line, this will become important when you go to add the name and registry.
@WorldofWayneUK Жыл бұрын
All fixed
@ThiloAdamitz Жыл бұрын
Fantastic work so far. Unfortunate though that you use the wrongly shaped impulse drive parts.
@WorldofWayneUK Жыл бұрын
I only saw the modded part after this was installed so I’m ganna have to go with it now
@markmcdonald1704 Жыл бұрын
Oh I just thought of something if you can't find the photo etch I might have those impulse grills depending on if you used the kit part or after market. If you do need them let me know. I am sure we can figure out how to get them to you.
@WorldofWayneUK Жыл бұрын
Thanks to viewer Paul Ryder I have solved it. Thank you anyways
@XEpiCsP33Dx12 күн бұрын
Hi just asking what type of soldier you used
@WorldofWayneUK11 күн бұрын
Unused a 70/30 mix
@richardslezak1274 Жыл бұрын
Looks awesome. Are you going to put resin into the windows or leave them empty?
@WorldofWayneUK Жыл бұрын
Yep although I am using canopy glue
@James-rn7dx Жыл бұрын
Bad news, you put the phaser bumps in the wrong spot. They should be above that shield grid line, but you put them below it.
@WorldofWayneUK Жыл бұрын
Absolutely right. I will fix that
@cdenny197 Жыл бұрын
Help a new guy out. I see where there are three leads out of the saucer section, yet the code shows three live connections and one ground. Where do I tie the thrusters into? Should it be a fourth wire so that it can connect with the lower section?
@WorldofWayneUK Жыл бұрын
No the lower section will connect to the same points. The main internal lights don’t go in the Nano at all. They are connected directly to the 12v supply. The thrusters and impulse crystal go into a different board. You will see that on todays video
@cdenny197 Жыл бұрын
I am sorry I mean the 4 yellow thruster lights on the other edge of the saucer section. Which lead due I tie them into.
@thunderrobots1980s Жыл бұрын
time to check the trash
@mikedowd6015 Жыл бұрын
Wayne, I had to cringe when you were doing your soldering! Everything looked great *until* you were putting the wires on the tinned pads. It just looked... awkward, and prone to burning your fingers when you worked across your own hands. Please stay safe, and at least rotate your work by 90 degrees clockwise to save your fingers from soldering gun burns!
@WorldofWayneUK Жыл бұрын
Just get a 15v 2amp one off Amazon
@Zodosh1 Жыл бұрын
That way, you wouldn't have bright spots
@Christopherhawl Жыл бұрын
Wayne you should use the solder that comes with th fix on it the kind your using it for plumbers on pipes