Building a Dining Table Top from Pine Framing Lumber (Farmhouse Table Series 3 of 5)

[@theprowitzproject9403]

Thanks for making this series! I have a garage full of tools that my husband used to use before he passed away. I kind of know my way around a shop since my grandfather used to make furniture all the time. I've been studying your videos and plan to make an 8-foot table in time to host Christmas at my house! I'll let you know how it goes!

[@mmcc_woodshop6288]

You’re welcome and thanks for watching! Good luck with your table build!

[@nmfam]

*salute*

[@jfred1924]

Dovetail breadboard, sounds like a great idea and a challenge. I might have to try one that way ….. someday.

[@mmcc_woodshop6288]

It’s tough to get the hang of but I really like how they turn out!

[@BuckysCustoms]

Good stuff, Matt! What you build with three tools is amazing! Keep up the great work!

[@mmcc_woodshop6288]

Thanks Bucky! Appreciate the feedback!

[@whiskerpallette4715]

I counted more than three.

[@AngieWilliamsDesigns]

I love using starbond to fill in those knots. And as you have found…. The thin is not as easy to use. I typically use the Medium. Not a fan of the thick either. The medium just seems to work well.

[@mmcc_woodshop6288]

I'm with you there, the medium is by far my preference to work with!

[@jimmeeks2632]

That's it, I'm getting a track saw. I struggle getting straight edges for glue ups on my table saw. Another awesome video!!

[@mmcc_woodshop6288]

Thanks Jim! The track saw has been a HUGE game changer for me.. They're expensive up front but I use mine in so many different scenarios. 100% worth it IMO if you build a lot!

[@davidboston4574]

Great video

[@mmcc_woodshop6288]

Thanks! 👍🏻

[@rickdunn3883]

Wow, I never saw a breadboard end done that way. Good idea. I wonder if it makes sense to actually put beeswax on the Tonge to make it slide easier?

[@mmcc_woodshop6288]

Thanks! Probably so, I didn’t think to try that at the time. I’ll have to give it a shot if I ever do this again 👍🏻

[@mathewmwanza9786]

I'm really a good fan of you i want you to put up a video on the basic 4 power tools for a beginner

[@mmcc_woodshop6288]

Thanks Mathew! I’ll do a video of that for sure once I get caught up with my current stuff.. thanks for the idea!

[@Ultimaniacx4]

6:50 🤣

[@mmcc_woodshop6288]

😆😆

[@FamedJa]

Hi Matt, would you think this method of joinery and glue-up would work alright on an outdoor table? It's in a covered deck so it wouldn't get wet or sunshine, but I assume the humidity swings are a little higher. This is Colorado so it's not a humid environment, but still the winter/summer swings. I have determined I definitely need the breadbox (new concept to me) to prevent cupping, but I'm a little bit worried about glue causing cracks. Should I reinforce the joints between the boards for the table top? I will be doing aprons with mortise & tenon joints connecting the table legs.

[@mmcc_woodshop6288]

A traditional glue up should be fine. Breadboards will certainly help warping/cupping, just be sure to attach them in a manner that will allow for wood movement - the boards will definitely contract/expand with the outside environment. P.S. I absolutely love visiting Colorado in the summer time! Enjoy the Mountain views for me if you live close to them!

[@byronturnbow2189]

Hey! I'm planning on building one of these. Did you use 2 individual router guides to make the dovetail groove or is that just one tool that can do that.

[@mmcc_woodshop6288]

I use 2 router edge guides, you could do it with just one but 2 holds everything much more secure when using a larger dovetail bit

[@davidbarron8706]

Still waiting on that pull out trash can cabinet

[@mmcc_woodshop6288]

Stay tuned, lots more content coming!

[@andrewochoa8507]

Do you think it’s a bad idea to glue and pocket hole the the table top?

[@mmcc_woodshop6288]

Pocket holes and glue is fine for joining the main section but the breadboard ends should be attached in a way to allow wood movement. Pocket holes and glue would restrict breadboard wood movement and the top would crack over time

[@Flipping_Assets]

How long is it?

[@mmcc_woodshop6288]

I think the one was either 6 or 7 feet long, I can’t remember for sure. They can be made to pretty much and size 👍🏻

[@denagudnyy7098]

Hi there, I am trying to make a round dining table 7 feet long, is it fine if the table top is 1 inch thick? This would help me out a lot thank you so much!!

[@mmcc_woodshop6288]

Yes, that will work fine 👍🏻

[@denagudnyy7098]

Thank you! It doesn’t need any extra support under? Beside the legs? Thank you!!!

[@markp1068]

Love the videos. What size dove tail bit are u using?

[@mmcc_woodshop6288]

Thanks Mark! I'm using the 22-113 bit from this set: amzn.to/3de6YAR

[@thedodsons38]

How did you get them flat on the planer without a sled?

[@mmcc_woodshop6288]

I just tried to find and use the straightest boards I could. I used to hand plane to flatten the entire top the best I could after the glue up was finished 👍🏻

[@pimc172]

What is pre-finish plywood? What do you mean by "glue won't stick"?

[@mmcc_woodshop6288]

What part of the video are you referring to? I don’t believe I mentioned anything about plywood in this video

[@pimc172]

@@mmcc_woodshop6288 you are right...must have been my KZbin playlist that switched while i was writing this question...which is obviously unrelated 😂

[@richardjensen3849]

Where do you buy the track Saw?

[@mmcc_woodshop6288]

Here's a direct link to it! amzn.to/3pHhUNG

[@mmcc_woodshop6288]

Here's a direct link to it! amzn.to/3pHhUNG