Great Job! Great Idea with the string to keep the layup from getting pinched between the mold!
@user-mv2bt2yd3p2 жыл бұрын
Отличная работа! Отличное видео!
@zachieJdebeer11 жыл бұрын
Really great,well done
@RaphiJegerParagliding9 жыл бұрын
Hey Loet! What a nice coincidence to view a random video and knowing the guy smiling into camera :) I hope you are doing very well! Greetings from switzerland, Raphael
@admahecha8 жыл бұрын
Amazing job!!!
@evgeniypryadkin20519 жыл бұрын
классная работа!!!
@jfinch8410 жыл бұрын
Very nice Jaap! One clarification for the Americans watching (who didn't figure it out themselves) is that the "wire" in the video used to hold in the fabric overlap is actually sewing thread. In the US "wire" implies that it's made from metal. What are you using for mold release and are you putting anything on the balloon to help it slide out so easily?
@AtomRoller5 жыл бұрын
Great job! Could you pls answer, how many layers of glass fabric are in the nose and what density of it?
@iamthetinkerman6 жыл бұрын
Very nice!
@RSWSolutions11 жыл бұрын
What material is the mold made from? How was the mold made? Beautiful results.
@jaap02711 жыл бұрын
The scissors are also used to cut lexan bodies for rc cars.
@MrAaalie12 жыл бұрын
Wow! Arbeidsintensief. En wat een resultaat, fantastisch!
@luisermert8 жыл бұрын
from witch material is the mold from? and whre can i get this material
@magneresjuan2 жыл бұрын
could you tell me how did you make the pylon in order to fit unto the mold?
@fabiennegeorgeault446610 жыл бұрын
Hello, wonderful achievement and very informative! where can I find this balloon? Because I want to produce parts using the same method. Thank you very much
@Ricom6912 жыл бұрын
What TV show was this on originally?
@jitterbuba9 жыл бұрын
Excellent craftsmanship sir. Finally a proper presentation of how to deal with overlaping and triming excess cloth. I see you don't use gloves at work with epoxy. Do you use some sort of cream on your hands or you just wash your hands later? With what? Top choice of music too. Thanks for sharing.
@6696joaopaulo11 жыл бұрын
Parabéns pelo Trabalho,você poderia me dizer quanto pesa esta fuselagem?
@magneresjuan2 жыл бұрын
Nice vid, what do you use for the " hard points for the wing " on minute 8.36 ? and on minute 6.19 you cut half of fabric in order to make space for the pilon? those new two peaces of fabric goes arround the pilon ? can you explain how you do that part please ? thanks !
@ladraode9dedos4097 жыл бұрын
Hello Jaap, One question, how long does it take to you ti finish the lamination and close the moulds, assuming you have the fabrics all cut, ready for the lay-up... Best! André
@magneresjuan2 жыл бұрын
do you put something on the baloon in order not to get stick ? thanks
@thenatedog6 жыл бұрын
great video
@comptebanni61313 жыл бұрын
how do you make the mould ?
@frogsoda4 жыл бұрын
The music, where the woman is singing, sounds like something from Cirque du Soleil!
@sachidanandbogra66932 жыл бұрын
Well made excellent
@RCTutz11 жыл бұрын
If I would want to build a wing out of glass fiber or carbon or whatever around a foam core. Couldn't I make a foam core, then make a mold out of it. Then, making the ''empty'' wing using the mold, then instead of using a bladder/balloon, pour expanding foam in there? Then it will push the fabrik to the mold, and I get a foam core.
@fsfoamy12 жыл бұрын
Prachtig gedaan. Geef je toevallig ook een workshop voor deze toepassing? Natuurlijk bereid tegen betaling. Nogal wat vragen over welke mal je gebruikt, epoxy en van alles. Mocht dat het geval zijn, laat het me weten. bvd.
@larrygerow2617 жыл бұрын
First song, what is the name?
@jaap02710 жыл бұрын
Use 2 balloons! Not sure about 260q or 350q. We use the 360 SEM.
@AnderzP6 жыл бұрын
Really nice Jaap. I built a few Super Gee II by Mark Drela a few years ago. Obviously materials and techniques have developed since :-). I'm thinking on leaving the old pod an boom style and trying this kind of fuselage instead. Ehrmm.. it looks like you are using TeXtreme fabric ? What weights are you using for the skin and the UD reinforcements ? I've been using 2x 61gram Kevlar layups for my pods combined with ready made booms. But Kevlar is a pain in the butt to work with and would like to try this fancy spread tow fabrics. But they are expensive and a tip of roughly what weights to start with would be appreciated. Thanks !
@jaap0276 жыл бұрын
Outer layer spread tow (textreme) 45 degrees. 1 layer spread tow 0 degrees. 1 layer ud. Fabric is 60-100g.
@AnderzP6 жыл бұрын
Thanks !
@pacgrafica47 жыл бұрын
Hi, how do you control the air pressure in the balloon? How do you know if the pressure inside the mold is enough? Thank you
@jaaphogeboom8917 жыл бұрын
Paulo Cardoso: You can set the required pressire on the compressor.
@TheSlumpen10 жыл бұрын
Are you using the 260q or 350q balloon? I have tried a different kind of balloon, and on in five seems to break, cheap though!
@jaap02710 жыл бұрын
Use 2 balloons! Not sure about 260q or 350q. We use the 360 SEM.
@jaap02711 жыл бұрын
The mold has been made from epoxy around a positive model. Google for "epoxy mould" to see how thats done.
@yeahitworks4 жыл бұрын
Thanks for sharing. Is the mold reinforced with fiberglass, or are there any additives?
@JosueRamirezBarraza Жыл бұрын
What song is this!!???
@peterm.13238 жыл бұрын
Is there a special reason for using glass fibre for the tip instead of carbon fibre?
@jaaphogeboom10558 жыл бұрын
+Peter M. Carbon blocks radio signals, glass does not.
@peterm.13238 жыл бұрын
Ahh right, i completly forgot that :D Thanks!
@jaap02710 жыл бұрын
The balloons are from Qualatex.
@arrowho10 жыл бұрын
Really Really great.
@teddykristiyan39324 жыл бұрын
Can you specify the kind of baloon?
@misilen245 жыл бұрын
I think wearing protective gloves is a good idea when working with epoxy...?
@spektrum3310 жыл бұрын
Thing of beauty {"_*}
@6696joaopaulo9 жыл бұрын
Hello Jaap Hogeboom; Dear friend I need some help .... I'm doing a fuselage and when I will fill the balloon into the mold it bursts and I end up losing all my work .... you tell me if what might be happening? Thanks a lot ... a hug
@giodog20009 жыл бұрын
Hi, very nice. Can you make a few parts for me?
@womackke11 жыл бұрын
you should wear gloves when working with epoxy
@cb36094 жыл бұрын
epoxy without gloves : no comment !!!!!
@dqvu55916 жыл бұрын
Very nice. I would like to know what is the material of ballon tube? If we can fabricate ourself (for another shape)?
@jaap0276 жыл бұрын
Qualatex balloons.
@jaap0276 жыл бұрын
Dinh Quy VU there are some that make their own blatter
@jaap02712 жыл бұрын
do you mean a similar video about building a dlg wing or similar building technique for building a wing? Loet Wakkerman has a great article on internet on how we buld our wings: try a search in google on "loet wakkerman positieve bouwwijze"
@conradtaggart99594 жыл бұрын
Good but would have been a lot more instructive with some comments rather than really irritating music