Building a Gaming PC with Hidden Cables - MSI Project Zero, Jonsbo D300, & RTX 4080 Super PC build

Time for a clean, yet powerful, build using MSI’s new Project Zero line of motherboards. With all the connectors mounted on the rear of the board and a case to accommodate, this build was incredibly fun and easy to put together. This build is a combination of new parts and used parts from my previous PC, and I'm really happy with how clean it turned out. Decided to do some filming along the way and make a casual video just for fun. I hope you enjoy watching as much as I did building ;)
Parts List:
- AMD Ryzen 7 7800X3D
- MSI Suprim X Nvidia RTX 4080 Super
- MSI Project Zero B650m Motherboard
- Jonsbo D300 MATX Mid Tower Case
- Corsair Vengeance 6000MHz CL30 DDR5 (32gb)
- Crucial P3 Plus 1TB M.2 PCIe 4 NVME SSD
- Corsair RM850x 850W PSU
- Arctic Liquid Freezer III 360 ARGB AIO
- 3x Jonsbo Reverse Bladed 120mm ARGB Fans (included w/ case)
- 1x Jonsbo 120mm ARG Fan (included w/ case)
- 1x Cooler Master SickleFlow 120mm ARGB Fan
#msi #msiprojectzero #rtx4080super #suprimx #nvidia #amd #7800x3d #jonsbo #d300

[@TheTimeIsChow]

I've owned this case for a while now, have sat in front of it almost every day since building in it... and never knew it had a protective peel on the glass.

[@spddmn_videos]

I wouldn’t have noticed it either had the white instruction sticker not torn a small fragment of it off when I peeled it. The protective peel was incredibly difficult and unsatisfying to remove.

[@madkeeb]

guys i read on some Chinese forums to know that is actually a explosion proof film. you are not supposed to remove it and that’s prob why it’s so hard to remove 😂

[@bamhamer]

@@madkeeb🤣

[@smft9147]

clean build man

[@kptnklutchpantz741]

How's the build quality on this case? Any issues with the project zero board and connecting the cables in the back?

[@69Nesta_]

I have the same case and I want to buy the JONSBO-SL120, are they good fans and is there a good airflow because currently with other temporary fans (I have only 3 in total) my CPU is a little too hot.

[@LukasWagenbach]

Is there no little holding support for the graphics card?

[@user-eo1tw9ly8q]

7:43 Damn man, that film is not to take off.

[@spddmn_videos]

The film was torn after peeling the white sticker off. PC sits on a desk 24/7, no real need to leave that film on.

[@IndoHelleneBall]

im having trouble with the fans this case comes with. how do i link them all together without a fan hub?

[@jonathanjohnson9192]

They are daisy chained, One chain for the power, one chain for the RGB. At end of the chain plug into the board.

[@SM_Higgs]

Why isn't the bottom fan reverse?

[@losslessthoughts]

Better as intake in that position.

[@SM_Higgs]

@@losslessthoughts i mean why it is not reverse fan - like 3 fans on the side.

[@losslessthoughts]

@@SM_Higgs The case comes with 4, 3 reverse flow and 1 normal. It appears the fans can't be bought separately as of yet, or weren't the last time I checked.

[@SM_Higgs]

@@losslessthoughtsOh, now I understand. I saw only version without fans in my country.

[@zheyuanli1396]

Why you pill off the anti break film ?

[@spddmn_videos]

Film was already torn on arrival and generally looks bad. No reason to leave it on, PC just sits on my desk.

[@draco_6473]

hi the fans are included in the case ?

[@spddmn_videos]

@@draco_6473 Yes. The case came with three reverse 120mm fans and one regular 120mm fan. I added my own for rear exhaust.

[@draco_6473]

@@spddmn_videos thank you

[@losslessthoughts]

The one thing that pissed me off with this case is that both the intake and the top don't have dust filters, only the bottom. Make it make sense!

[@Iram_Deum]

Generally, the top is for exhaust. Adding a filter there only helps keep any dust inside, possibly clogging the entire vent and retaining all the heat. If the holes on the panel where the fans are intaking are are small enough [and it has good porosity], you wouldn't want a filter there either because the holes are small enough to keep out larger dust particles. Adding a filter at that point would impede airflow.