BUILDING A MOVIE CAR! REBUILDING THE LOWRIDER FROM TRAINING DAY! NEW SUSPENSION GOES IN! HYDRAULICS?

[@swiftxb]

I put bearing grease inside the cap threads before I would tighten them. Helps with water,rust and makes the caps go on a lil easier.

[@CaseysCustoms]

Good to know! Thank you! I noticed a little wd40 on the threads helped a bunch, grease sounds even better

[@davidcedillo9773]

🔥

[@Anthony-ue4zm]

Respect how much enthusiasm and excitement you show when building a lowrider!

[@CaseysCustoms]

Thank you! I’ve got a lot of people complaining about it but I’ve realized for every 1 that bitches about it I’ve got 20 that love it.

[@exquisitearangement]

My mother had one of those cars when I was a youngster, and I was digging it in Training Day. My favorite build by far.

[@jamielunsford1]

ALMOST AT 100K!!!!!! Congratulations!!! Well deserved, my dude!!!

[@Eyes_2_C_Lies]

Man I just love them groove lines on the side. My first car was a 81 Monte Carlo white with blue leather interior when I was 18yrs old. Ever since ive loved the Monte Carlo

[@mirabalmedia]

The two red knock-off adapter goes on the right side/ passenger side. And the two white knock-off adapter goes on the left side/ driver side. It is also stamped on the adapter's left side and right side. As well on the bullet style spinner. Also, put a little bit of anti-seize on the threads of each adapter

[@souljahsent1219]

I was reading thru comments to see if anyone else noticed that one white an one red on drivers side

[@mirabalmedia]

@@souljahsent1219 yes, I saw in the video he had the red adapter on the left side/ driver side. But later in the video when he was tightening the bullet. I saw that he was knocking the bullet wrench the right way.

[@angelluis4444]

Dude your great! I feel like I'm watching Gears with that dude Stacey on Sunday morning.that Monte has kinda pulled me out of a slump.get excited Everytime I see a new video pop up.thank you.

[@violetgrowers]

100k WOOOHOOOO well done Casey. Congrats from all the way over in Perth, Western Australia

[@manmadehustla]

👌🏾 the wheels are nice its coming along. Can't wait to see the finished product!

[@7Kustom]

The Monte looks killer!!!

[@MTAYLOR3617]

A lead hammer from ebay is a must! It won't damage the wheels. There a couple of videos on putting wire wheels on a car that are really helpful. Good looking ride tho!

[@JermainColbert119]

I like it. My favorite car training day monte. You have my attention. Can't wait until you're done.

[@stevenclay9573]

Great job on the build I've always been a Monte Carlo fan

[@ThisIsMyLowriderLife]

A little anti seize on the treads, if they rust they will be hard to get off with no anti seize. I try to get my knock offs pretty tight while the car is up, so your not fighting the weight of the car when tight the wheels. Then after i put the car down , wack them again, take it for a ride, and check them again, I’ve known many who have lost a wheel.

[@dennisjohns624]

Pretty sweet. I can't wait to see it black and on the ground Badass👌

[@rogerwhite3644]

Hey Casey! Try to get Denzel Washington to sign it after it's finished. Totally cool car

[@ChrisJones-pw9bi]

Red knock off wheel adapter goes on the right side of the car and white goes on the left, you have it backwards, they will unscrew while going down the road and tear up the fender

[@joshuabarlow9373]

Hell yeah! My dude you are definitely hitting 100k 🙌🏻🙌🏻

[@marsha821230]

Shows how much stance and wheels change the look of a vehicle , I'm in love

[@JulioMartinez-ud4vu]

You build badass rides brother and what's holding on the spoke wheels are called knock off's .

[@CaseysCustoms]

Damnit i knew that but called them nuts. 🤦🏻‍♂️🤦🏻‍♂️ talking on camera is hard sometimes lol

[@tompreciado863]

Dude! You are so close! Come on guys, we can help Casey get to 100k!

[@johnnycashh7148]

Keep the content coming bro...good stuff!!

[@jeffchevy1972]

Love this build so much. Congrats on being so close to a 100k

[@raymondproseus6923]

Just found your channel dude, so far I love it. This Monte Carlo gets slept on and I don't know why. I grew up in a bard part of town in the 90's and used to see all manner of G bodies on hydros and these rims. One dude had a purple Riviera with the white quarter vinyl roof. Another guy I knew had a slammed Hardbody Nissan truck with similar rims. So this build really brungs back memories. Keep it up.

[@grahamharder6511]

Awesome build, already subscribed! Its coming along nicely, looking forward to the next video

[@samsanderson7159]

I'm really diggin those painted brake Rotors! Lol. Jk. The monte is gonna look awesome when it's done.

[@CaseysCustoms]

🤣🤣 they are getting replaced anyways lol

[@anthonypesqueira7540]

When I did my training day replica, I used the compete sun roof setup from a 2002 cadillac Deville. The whole tray unbolts from the car, don't forget to use the drain tubes. It's a perfect fit in the gbody. Mark my works it is literally the only sunroof setup that works perfectly and allows the glass to slide into the roof. Not that pop up sunroof bullshit. Also, the red adapters for the wheels go on the passenger side. White on the left. Or your wheels are gonna fly off when you're driving. Amd good luck with any body parts for those cars. They are a bitch to find.

[@bradforddilly4190]

Literally should have 'L' and 'R' stamped on the adapters.

[@scu-dub]

My cousin did the exact same with his 79 bro lol he said the same freakin thing you did man I was laughing when I saw your post lol you two would talk for hours about that roof alone lol✌🏽

[@bigsleez8655]

Thats sick

[@mangaswilliams4145]

Love all your builds keep up the great work love how you hit something for everyone

[@richardbrowne3641]

Looks like future peice of art! Bag & tag it, Cassey!

[@vduber03]

Ive always loved this movie car. And u just made me wanna build my own lol. ❤

[@bradbenson3338]

It' really starting to come together. Looks Awesome!!

[@7Kustom]

Prayers for 100k subscribers for you Casey!!! You’re going to make it!!! 🤘🏻😃🤘🏻

[@clarkgriswold5842]

Been here since you had 6K subscribers and came to say congrats on 100K subscribers Casey!!! Awesome content and learn so much from your videos!

[@broloc4900]

Omg that car looks so dope .even though you didn't finish it.. still looks wicked . I want one

[@michaeltucker1646]

Looks bad ass can’t wait to see it all done!!

[@65BusDuo]

dream car when i was a teenager. DOPE build

[@stevec3465]

My dad bought a black one off the show room floor, and then I wrecked it. Still good memories. P.S. it was black with red interior. Thanks for the memory.

[@dankwearadministrator5061]

Looking sweet and was a great choice to bag it

[@eddiegonzalezgonzalez227]

🎉🎉🎉🎉🎉🎉 congrats 🎉 100k whoop 🙌

[@nickmassey9104]

Casey your rocking this build .👍

[@A.D.R.J.Coleman]

Yes, you could definitely over tighten them you can mess up the threads and stretch them

[@waynehardy6186]

Casey love the Monte Carlo build . I had a 76 Monte Carlo that I static slammed where the frame is an inch off the ground, but I love it drove it as often as I could.

[@joeyrangel228]

Love it bagging my 74 monte carlo with 22 inch spoke wheels too ,love the ride of bags over hydros

[@thehomemap]

Can't wait to see you turbo can the trunk......a true Lowrider has a clean trunk setup 😉

[@1flores4]

I and everyone i know have always used a lead hammer brother.... Awesome build can't wait for the next vid 👍🏼✊🏽

[@BrianBrooks1971]

Looks good laying on the ground!

[@donwiley1055]

You a r e definitely to hit the 100k but I can say this much family come first when they sick it's time to take care of them get them back on the feet as always this video turned out to be one of the best to me waiting to see the paint and everything else that goes on but I know it's going to be off to change

[@CaseysCustoms]

Thank you!

[@RALPHD099]

man, it’s so awesome how excited you are building your first lowrider… i was getting worried you were going to leave the red adapter on the left side, but you got her fixed up… and typically you want some never seize on the threads, also after a couple blocks of driving around, recheck your knock offs… looking forward to this build being finished, super excited for you bro…

[@CaseysCustoms]

Thank you. I got a couple comments about the red on the driverside lol. Some people think they see all 50 hours of a work week in a 15 min video. Im not going too crazy tightening them down just yet because they will come back off for paint, but the anti seize is a good tip, thank you!

[@1320Bushido]

Music in the TRUNNNNNNKKKKK!!! Look at all that space!!!

[@josealfredocuevas]

Casey the 1979 Monte Carlo is looking awesome with those spokes and the new tires, really starting to come alive like training day, can't wait to see when you complete the project with the air ride good luck keep up the good work...👍🏼🙌🏼💯 Jose'

[@kdsboosted4954]

I'm curious about the front wheels not being centered in the wheelwell? Looking good! Just an FYI you can get hydraulics to ride nice on a lay n play system. Just slap some shocks and accumulators on nothing beats the sounds of hydraulics in your lowrider. Edit I always use a Terry cloth between the tool and knock off and always hammer the wheels on while it's jacked up. No reverse burn outs!

[@Brandenlytle1]

love this build Casey!

[@suzukigsxr5]

Loving your channel man. I’ve got both the 78 and the 79 Monte. Here in the sip they are not that hard to find. Hope you find all your parts soon!

[@CaseysCustoms]

Sell me some turn signals then! Lol

[@A.D.R.J.Coleman]

I'm not a bag guy, definitely would swop out them for Hydro's, but definitely looks better

[@MichaelAngelo-oj7sy]

Dude the wheels are going hard. Great score

[@damienriggs2691]

Use the shelf the gas tank is under the trunk floor. Alot easier access

[@davidgann7475]

Lead mallet you get a better hit when you're knocking them rims on then plastic that was with sand just break I don't feel like they ever get them tight enough

[@jonathangrillo8178]

If there isn't a reenactment of training day when this is done we gonna have problems lol

[@abrown5516]

Very nice can't wait to see it finished. I had the same wheels on my 72 Impala I made the BIGGEST MISTAKE of running hydros completely ruined it I had 2 pump 10 switch 6 deep cycle marine batteries F,B,S,S! Even though I had reinforced frame still messed up. I also had 15x7 reverse 100 spoke on my 78 Caprice gloss black at that but also know the problem finding body parts, lenses, weather stripping, ect I have been contemplating bags really would love B,O,S in front & regular bags in back! Glad I found your channel keep the amazing vids coming 👍

[@oldcarnut3953]

Hell yeah Casey...100,000 is damn near here. I been pushing hard to see you hit your 100,000 goal. Friggin love your channel man. Keep the badass videos coming. Keep On Keeping On Brother!!! 👍🏻👍🏻👍🏻

[@CaseysCustoms]

Thank you very much

[@Dragnet2]

I think it was a good call to bag it 👍🏻 looks good Slammed…..n am not into the slam life…..@ Alll

[@matthewfaulkner4323]

@@Dragnet2 Good call Ozzy, he wouldn't have pushed forward without your opinion..

[@davidweidner1675]

Love your Dad's reaction to Gloss Black

[@impala6524]

Monte definitely coming along great

[@HustlinHorsepower]

Congrats man….100k that’s huge! The social media aspect of this social media stuff is just as much work as the actual build! Keep killin it!

[@CaseysCustoms]

It really is lol, and thank you!

[@bbay1977]

So close to that 100k Mark. Shouldn't be a problem now with a month left. Keep up the great work and Content and I cant wait for that giveaway. 😁

[@chrstiano2497]

Badass bro!! Keep em coming!! Looks damn good with them Ds.

[@tavarispierce8929]

Bro I’m so glad ur doing bags hyros r so hard to maintain and trust me definitely don’t sound look like what the movies make it sounds like , ur doing a good job bro fuck the haters 😢

[@susanhelms1553]

It's a looking good bro your lowriders become a lowrider now just got to get all those stuff fixed and painted yay I'm so happy for you bro much love to y'all be safe and stay healthy sincerely Suszie

[@MichaelAngelo-oj7sy]

Yo this big Block from SC and New to the channel, cool to see everyday dude doing it his way. Keep it up bro

[@juanpalos3657]

Can’t wait for more of this build …. You will hit 100 k before the end of the day shout out to you from Mexico buddy

[@Tpavlock]

I have a 78 MC factory triple black landu and a 79 MC sport coupe although I cut the whole roof off of my 79 when I was in high school ...I wanted a convertible ...so I'm loving the build an I know your frustration on finding parts

[@bub9163]

Make sure run Luxury sport/Iroc side mirrors to match movie car, also the moonroof you can find at Just about any wrecking/Salavage yard. It ain't very big so could find in late 90s early 2000s Eldorados and devilles and multiple others also few Lincoln models.

[@CaseysCustoms]

I had a guy with one on Facebook lined up to get this weekend and he flaked on me

[@bub9163]

@@CaseysCustoms Isn't that how it always happens 😄. Enjoying the videos, keep doing your thing🤙🏼. Oh but should've went Juice on it 😁

[@Khaltrops]

Oh geese you used the Mickey “Wut happen” hahaha awesome

[@CompToyZ]

Loving this build Sir. So Brent with Halfass Customs sent me to you on youtube. And im sure glad he did, been following you a while now. Anyway, right now Brent is in BC Canada with Japhands/Make it Kustom doing a series of videos. Is that something you'd be interested in doing? I think it would be awesome seeing you guys all playing together.

[@M.Perez82]

Really lovin this build.. car is looking 💯 already!!!!

[@marioarizola4921]

New subscriber. Love the content. Center lug is called a knockoff. And I suggest maybe getting a led hammer which prevents damaging the wheel. And I always double check my knockoffs 10-15 miles after putting on then periodically every month or so after that. 20+ years of lowrider and haven’t lost a wheel yet lol

[@johnlopez6921]

Build you like a big break away bar cut the ears off the knock off wrench and weld it inside a pipe about 10 inches long and notch out the pipe and weld you about a 2 ft handle for leverage

[@officialwiselymethod1311]

My DREAM car. 🔥🔥🔥🔥🔥 what an awesome job dude I love it. 🔥🔥🔥🔥🔥

[@FastLaneLyfe]

Best build channel on KZbin. 🎊 🎊 🎉

[@CaseysCustoms]

🙌🙌

[@AndysDogHouse]

Hey Casey. Good video. I love those rims for sure. Sorry to hear that you have been under the weather. Yea, Some guys try to take advantage of us looking for parts. I would help another gearhead out rather than make a buck. It's looking FINE. Thanks for sharing.🍁👍👍

[@chuckanaya498]

Looking fresh and should ride nice too with a slight bounce when fully aired up. Great job on the progress!

[@tompreciado863]

I glad you and you son are feeling better, happy belated thanksgiving bud!

[@mariuszmayer6332]

It's great just the way it is :) there's not much rustrods from the 70's. 100k is knocking on the door 🤩

[@GratefulEd907]

I’m not really into lowriders but this is gonna be sweet. I’m subscribing to keep up with it and check out the other videos.

[@CaseysCustoms]

🙌

[@yjmoneypit]

I understand your going for the look with black, but I think a dark blue would look good to, that colour looks good

[@Cemeterygatepro]

Mike's Monte has a lot of things for that car.

[@impala6524]

Congrats almost to that 100k milestone 👍🏾

[@DinasGarage]

It’s Crazy what the right wheels and right stance do to a car..

[@modestodejesus8667]

That’s the only thing I don’t like about bags finding the leak with hydros you can see the fluid love the vid first time seeing your channel

[@SORTANUMBER1]

Looking good make sure you have the adapters on the correct sides or them bad boys will come off while driving had a homie experience that!!

[@tass.1127]

I had one my mom bought new. a '79. Wish I still had it.

[@crosson347]

Love the build. I can't wait to see the finished product

[@ryanhicks942]

So excited for this build. Gbody’s are so fun. I’ve had 3

[@DPalooza96]

Casey what's up dude. Another totally bad ass build man. Can' even wait to see how this bad boy Monte turns out. It just looks Rad already with the Chromed rims. Great job as always with another great Video LOL!!!

[@mattodombigoscustoms9957]

Red goes on right side I seen u tightening them and they suppose to tightn up Goin to the front so when u drive they get tighter

[@dillonwarrior2583]

I got tha same car but I’m gonna do hydraulics.. I’ve never built a lowrider ever.. very first one.. good luck wit yours I’ll be watchin tha videos.. 👍

[@jacetorre2407]

The main lug lol we call them knock offs dig the channel

[@thamontgomeryz]

If you can find broken turn signal but good housings. You can get replacement turn signal lenses from Shaffer Lense i believe it was I got them from.

[@USA1-g9i]

I had a 1980 monte carlo. I didn't have money to make it a low rider but it was a super clean car . . My wife had cancer and I had to sell it because she wanted to move back to GA before she died.

[@mrclay409]

Good luck on find parts. I have a gbody and really wish I could find stuff I've been looking for.

[@FastLaneLyfe]

The tool is for the spinners that usually goes on the locking nuts. The spinners were shaped like stars.