Building a Nissan Skyline GT-R R34 Z -Tune Tamiya 1/24

[@haydennathaniel5034]

so happy that you painted the body in red, red was my most favourite color,so thanks for building it!,happy modelling :)

[@ScaledGarage]

Thanks, appreciate that so much, happy modelling!!

[@jbp122]

Excellent work. I just started building models with my 6 year old son and he really enjoys working with me on it.

[@danmurphy5889]

You did a great job, it is a "model' car not a real car after all. The paint looks to be a bit thick from the can, I found putting the can in hot water for about 5 minutes loosens it up and it flows better. Well done :)

[@aegis062]

If I have one complaint it is that the paint looks like it was laired too thick and it looks like cheap toy because of it. otherwise I like it. If you could do it again I would suggest doing the first coat from farther away and in longer and faster strokes so that it becomes a thinner lair and doing 2 coats instead of 3 since it looks like it got laired pretty thick..

[@ScaledGarage]

I will try that technique

[@BarricaG]

Nice work! This car looks great in red.

[@ScaledGarage]

Thanks 🙏🏿

[@palsdaddy196]

You are good. You are better than most of the modelers on this app, but you don’t have the recognition that you should have. I watched your bugeye build and I ve done the same with amazing results!

[@ScaledGarage]

Thanks!! That means so much!

[@mathisivapaalan1149]

Great work mate!

[@ScaledGarage]

Thanks!

[@Mike-vk3ji]

wonderful !

[@ScaledGarage]

Thanks 😊

[@JDMMaster26]

In my opinion this colour is in top 3 the best colours for the Nismo Z-tune R34 so here's the list: 1. Bayside blue 2. Red 3. Gray with the Nismo livery

[@ScaledGarage]

My list would be 1. Midnight Purple 2. Gray with Nismo livery 3. Bayside Blue :)

[@JDMMaster26]

@@ScaledGarage that Midnight Purple looks dope too and I probably forgot about that one

[@CPiGTi]

Z-Tune's actually only came out in Silver and 1 was Midnight Purple 3. A second Z-Tune was painted MNP3 in 2018 by Omori Factory

[@geeraardd07]

Amazing video, i’ve bought ir and it arrives this week, im so excited, i will paint it in black

[@ScaledGarage]

Ayyye thats 🔥🔥. Good luck my man! 👍🏿

[@riosebastian8305]

Amazing build 👍

[@ScaledGarage]

Thanks, that means a lot 😀

[@woppa832]

Awesome 🔥🔥

[@ScaledGarage]

Thanks :D

[@ScaleAutoGarage]

Great video and love the red. Good color choice. The filming was top notch with camera angles and focus and the edits to the music was spot on. My only criticism would be the font you used for the text. Great work. Subbed.

[@ScaledGarage]

Thanks very much! I shall look into other fonts!

[@chauffeurmarco]

Why scale models have those lines so you got to mark and sand them?

[@BushidoScale]

Great job bro 👌

[@ScaledGarage]

Thanks 👌🏿

[@sanskritibora7854]

I had a question, how long do i leave the decal in the water for and what is the overall process of applying the decals/stickers with just water instead of decal solution

[@ScaledGarage]

Leave it in water for around 15-30 seconds, then take it out of the water using a q-tip, then slide the decal on the surface using another wet q-tip or gently with a toothpick, then using Microset setting solution carefully dry it using q-tips.

[@dxve5729]

Very nice build!

[@ScaledGarage]

thanks!! 👌🏿👌🏿

[@xz_xzzz]

nice build! may i ask why do all scale model makers perform step at 2:08?

[@ScaledGarage]

Basically there are lines where the plastic fuses together in the molding process that shouldn't be there. Extra lines on the bumpers, hood, trunk, etc ... that aren't on the real car!

[@xz_xzzz]

@@ScaledGarage ok thanks alot :)

[@drewgoh5748]

Hey, nice video, did you have any issue with the front wheels not fitting properly? I've been trying, but didn't want to use cement (still want my wheels to rotate).

[@ScaledGarage]

Yes the fitment was off so they don’t turn fully, which isn’t a problem to me. A way around this is to sand the material inside the fender before paint so it gives a little more room for movement

[@ekrnoob769]

Theres a metal transfer sticker that comes with this set and its a square with the numbers 282 in it, i cant find where it goes on this car, can anyone explain what it is?

[@ScaledGarage]

It could possibly be an extra or optional sticker if it isn’t anywhere on the instructions!

[@ekrnoob769]

@@ScaledGarage oh cool! I think ill just leave it in the box tho 😂

[@chrisbenson15]

Any special liquid to put the stickers?

[@ScaledGarage]

Microset + Microsol

[@jorgebolivar9300]

I'm confused I have One question? Why did you put the entire kit in oven for?

[@ScaledGarage]

😂😂 not sure but I thought it would be funny at the time

[@zero00-100]

Red kinda makes it look like an Evo.

[@ScaledGarage]

Funny you mentioned an Evo!! Stay tuned for the next build 👌🏿!

[@marklieghio6221]

you forgot part of the exhaust system..from the manifold.Also your detail painting is ruined as the paint is to thick,your covering up all the detail.Try thinning your paint and using a smaller brush.

[@chrisbenson15]

Bro wheelbase of this car?

[@ScaledGarage]

I don’t have this model at the moment but I will update you in the future!

[@chrisbenson15]

@@ScaledGarage ok sir

[@elijah._.7972]

Lemme have it

[@ScaledGarage]

I don't believe any of the builds I have complete are worthy of that :)

[@Youngin9441]

can i pay you to make something like this for me?!

[@ScaledGarage]

Not right now but in the future, yes

[@Reverant777]

is this a joke?)))) He filled the car with paint so that the paint almost cracks .... Well, who does that ???

[@ScaledGarage]

Haha yeah i’m not sure why I did that at the time but it worked 😂

[@TheBadBone23]

If you want to learn what not to do, watch this video!!!

[@ScaledGarage]

Could you provide insight on what I can get better at? 😀