Building an upgraded PANTHER TANK in Sprocket!

Meep meep. Tank noises. I am a tank. Meow.
What am I even doing anymore
how do description
_________________________________________________________
Become a youtube member today for exclusive perks!
/ @patchbits
_________________________________________________________
TANK FILES WILL BE SHARED IN MY DISCORD
Link to my discord ;- / discord
_______________________________________________________________
Sprocket Discord : discord.gg/baFH43keyR
Sprocket Steam Page : store.steampow...
LICENSES:
_______________________________________________________________
"Brittle Rille" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons...
And now tags for exposure :)
#Sprocket #tank #design #simulator #building

[@SirMcMuffin]

People who think you starve your cats clearly have never owned one. They literally do whatever they want and change their mind when they command you to do something. My cat meows for water just to splash his paws in it and tip the bowl over.

[@ShadowDragon1848]

I NEED TO GET OUT!!!!!! AHHHHHHHHHHHH! ... ... Nevermind

[@maxo.9928]

Whenever my father or I feed the cat he eats it right away, if my mother or sister feeds him he leaves it for an hour or so and then eats it, and we feed him on a set schedule. They really are just moody and strange animals lol.

[@Avektro]

I ate my cat.

[@DefinitelySpirit]

Nah they wanted the water to do just that

[@andresgagge6977]

The cat isn't tipping the bowl on purpose, they are trying to make the water flow before drinking it, it's instinctual. I bought my cats a fountain which they can't easily move, one of them drinks from it easily, the dumber one does this water ritual for like 5 minutes where he scratches the floor and splashes the water everywhere before finally drinking it by drenching his entire face😂

[@hatspies7708]

Seeing as you mentioned it: Panther II did exist and was in fact built (it's currently in the USA in fact) but just not in the way it was presented in WT. IIRC it started development before the Panther even saw service. The idea was basically to uparmour the hull (I think it was 100mm front and 50mm side compared to 80mm from and 40mm side on the regular Panther, but don't quote me on that) as well as increasing parts commonality with the Tiger II. Apart from that, I'm pretty sure there was no different turret or armament devised, at least not before the project was cancelled (the actual one has a Panther G turret, but I think that was just plonked on by the Americans after capture, but in pop culture you do usually see it with the Schmalturm

[@hatspies7708]

Bear in mind that's off the top of my head, so I'm probably wrong about a few things

[@alejandrozapataq]

the panther 2 is not a real tank by itself, what i mean is that there is no evidence of a project to make a panther 2, the two tanks tagged with that name are modified versions of the normal panther that the americans named panther 2 just because it looked different which makes sense since they were looking for upgrades but other than that the panther 2 name was just made up by the american soldiers. So technically speaking you are right, there was no difference in the turrets or armament because you know they were just normal panthers with some modifications (which was a normal practices that some companies did to search for improvements)

[@orionsalt8288]

There was a new turret for it. The "schmale Blendenausführung" though it was never made. It was the precursor to the schmaltrum. The sides were to be increased to 60mm not 50mm. It was the panther G that got the 50mm sides. (I think)

[@LupoSenpai]

The Panther G turret was indeed put on for testing by the americans. The Panther II hull they captured had no turret at the time of capture. The front is thicker a little more angled and the engine is the same as the Tiger II.

[@robertharris6092]

​@@alejandrozapataq so basicly itd be a panther h. And would be like how the pz4 G had its armor increased by 30mm vs previous versions.

[@dreadshells5611]

28 ton panther is crazy lol

[@the-nm3xn]

how much did it weigh originally?

[@zillaplayz2753]

​@@the-nm3xn 44 tons i think

[@Onezmhu]

@@zillaplayz2753 yeah around that

[@armandocampamartinez8307]

Yeah he’s definitely feeding that cat too much if it weighs that much

[@dJslegoandgeography69420]

Yeah 44.8 tons for a "medium tank" is crazy what patch bits made is more believable as a medium tank

[@SGT_LUCA]

The Panther II was only build as an unfinished prototype(2 of them). However it was only a chassis with plans of using the Schmalturm with a 7.5cm KwK L/70

[@ItsDavieman]

almost! the panther 2 only really affected the hull in defense of anti tank rifles, compatibility with the tiger 2 and a UFP increase to 100mm! you are thinking of the panther F, a late war variant that was soon to enter production towards the end of the war, with only "F" hulls seeing combat mismatched with "G" turrets. one of my favorite topics to talk about actually

[@thespyfromteamfortress2568]

Schmalturm was not planned for the Panther II, it had its own turret design. Closest thing you’ll get to it is the stock turret it has in world of tanks

[@PR0monke]

Throw back to the yelling scene in the "Tiger III" video

[@JansenX12]

As a german i approve your attempt in making a German Tank :D But yeah your Tankmaking is getting better. I would say this one is more the size of a Panzer IV. The Panther was a very large and tall Tank.

[@angry_zergling]

This sort of thing was my goal when I played Sprocket. Make something mid-war that could have replaced Pz4, Panther, Tiger all in one tank. Light enough to be Pz4 weight, angled armor of Panther, and side and rear protection of Tiger. Have one at ~35 tons that can tank Long 88 from King Tiger from anywhere to the front/front-side. Armed with 192mm penning 88. It's tops out at only 40 but can climb 70 grade, stop on the grade, then startup again and crest it, and 3 reverse gears so it's quick accelerating and nimble.

[@clay8256]

cats are very strange, in a loving way ❤ also i cant wait for Sprocket to be updated. I got it after the geometrics update so i havent experienced the features that were temporarily removed after like more mantlet options :/

[@DuplexWeevil337]

Very cool 🇬🇧

[@jordanr0419]

In line with the effort to combining the panzer III and IV chassis, i see this as a effort to do the same with the panzer IV and V chassis. Def cuz of the weight and the hybrid hull design.

[@subjectc7505]

I can see this being real and probably in limited service.

[@artemisthehunter8360]

You should make one of Hobart’s Funnies

[@Sealgaymer]

I think the side skirts look great with the handplaced dents and slightly offset rotation!

[@MicrowavedCaprisun_]

You should make a heavy tank with a pike hull (like the is-3) anyways, the quality of these builds just keeps getting better! Keep up the good work🪑

[@Человек-х8у9э]

Panther 3 is not a German medium tank. It's a German medium cat.

[@Silver_Semtexagon]

You know what a weird but fun tank to build could be? The SU-IT-45

[@TacticalDumbas5]

Hey, there is actually a way to add a counterweight to the barrel! It’s under the balance section of the cannon, I’ve found it very useful when making long barrel cannons with very fancy mantlets.

[@TomaszRyszkowski]

I am a huge fan of this description. All of your videos should have this exact description lmao

[@cheesed8752]

GAAAAAAAHHHHHHHHHHHH I DID THIS YESTERDAY CAN YT STOP SPYING ON MEEEE FIRST FRANTIC NOW YOU GAH

[@cheesed8752]

THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS THEY'RE IN THE WALLS

[@clay8256]

lmao, google is spying on you

[@the-nm3xn]

​@@clay8256sploo

[@cheesed8752]

@@clay8256 NO THEY ARE

[@markdombrovan8849]

If i remember it correctly, Panther II turret was called "shcmalturm" which is exactly what it sounds like - small turret. That is - it was more cramped inside than the early panther turret, in war thunder you can compare Panther A and Pather F to have a look. So long 88 just wouldn't fit in either one, it was an experiment on a blueprint and it didn't work oit

[@tommeakin1732]

15:11 Lol why do you say that like it's not a given? You miss the fact that there is no gameplay anymore? Truly shocking :^) I have no interest in playing again until I can, you know, actually do something with the things I build haha

[@markolysynchuk5264]

One thing that bothers me about this game is that the corners are so sharp you can cut yourself with them. And also those angled sections of sloped armour at the front really don't make the tank better. They reduce the amount of space inside the tank and prevent effective angling.

[@ronaldmcreagann6343]

Those hull wedges look very reminiscent of certain AMX hulls like the TOA100 or M4, very neat to see

[@ToastToast]

Merp merp mew. I am also a tank. Mrow merp.

[@TheRealFernancoTachanka]

Panther III

[@Amelia-mq6hm]

I have a weird opinion on the sideskirts dented thingies, I feel like they would look better if the edges were lifted? Like of there was a little lip?

[@alejandrozapataq]

i remember reading the story of the panther 2, a lot of people think that the germans really had a plan for an improved version of the panther but thats very far from reality. The two tanks that got named panther 2 were captured by the americans in a factory, if im not mistaken it was from schmalturn but i may be wrong and those two tanks had some changes on them, the company behind the factory was trying to see what improvements they could make to the tank to be implemented like covering the tracks and a diferent gun or turret, the americans saw it as a different tank and tagged it as panther 2 but it was just the usual modifications companies at that time did to tanks to get the attention of the army like porsche with his weird projects. There is a chance those two models were in fact a plan for a panther 2 project but there is no evidence of that besides of the american army calling them that name. People kept calling them like that since then for some reason and world of tanks made the myth more popular Edit: its not schmalturm, i dont know why i have that name in my head.

[@tuxedoederminenaswall3751]

It's that waffling fluff again. Oh boy. Time to get him on the big screen for all to watch

[@connorholt6965]

Panther 2 ausf b a smaller panther two design that was built due to heads and iron and steel due to constant bombing

[@kwyoushyt6356]

Try designing an External Gun System next with the crew fully in the hull :>

[@LolLol-Comunis]

I was building a rocket in ksp and the music was so confusing lol😂

[@Okuu__Gaming_1]

The cutbin the back was on a panther, not a panzer 4, and it's an ammo hatch

[@exstacc1886]

once again asking: super landships like the ratte

[@Wt.__.Player]

Well to be good design and better it would be better to remove the hull mg why the new designs doesn't have them

[@echatzaki8777]

the panther 2 had a 75 and in real combat you do not angle

[@Direwolf13PS3]

Panther II was only a modification to the hull with increased front and side armor. The Schmalturm was developed for the normal Panther, and was built after the Panther II program had been cancelled. A Schmalturm concept which could fit the 8.8cm was drawn up, but would've been extremely impractical as two-piece ammo would be required to load the gun in such a cramped space. Another Schmalturm concept was instead for the Panther's extant 7.5cm L/70 and would've been a decent upgrade to the tank as it included a rangefinder. A further proposal was to mount the same 7.5cm Schmalturm on the Panzer IV chassis, this version would've had thinner armor. Warthunder's Panther II and Tiger II 105 were both likely based on spurious 'historical' documentation used to justify their designs in WoT. Thus when the ahistorical nature of those designs was fully understood they were removed from the WT tech tree. The King Tiger with a 105 concept was a real proposal, however the 105mm proposed could not fit within the turret and would've had even larger ammo than the 8.8cm L/71 which was already hard to load within the KT turret. The 8.8cm Schmalturm Panther proposal was also real but was likewise no more than a pipedream due to space constraints.

[@warkus123]

It's a Panther 2 Lightweight... A Kitten 2

[@Frieze_XD]

I’m going to go do the research myself, but are there forged tanks? My knowledge of metal making comes from cars, and forged pistons are the strongest, but I’ve only heard you talk about cast and welded turrets. UPDATE: The only information I found was from Quora, and I don’t trust anything I see on that website, so if someone knows the reasons, please share them.

[@maxo.9928]

Cone of Arc did a good video on the Panther 2, it was basically an attempt to up-armour parts of the hull, specifically the sides of the hull, as Soviet 14.5mm AT rifles could penetrate it there, but they found that the add-on "Schurzen" armor plates that you see on later-war German tanks also worked and could be used on any tank design, including Panzer 4s, so they cancelled the Panther 2 project and just used the add-on plates. Only other things they were trying to do was upgrade the engine slightly and fix reliability issues, which they went on to do for later Panther models anyway. War Thunder's Panther 2 had the improved hull armor the real one did, but a turret that was never going to be put on Panther 2 (the incomplete Panther F's "Schmalturm" turret). The real Panther 2, if it was put into production, would have looked identical to Panther Gs, just with thicker side armor and a slightly better engine/transmission (that still wouldn't have been 100% reliable).

[@leonardo-m2524]

my panther 3/2 take is to make like a round front for the hull like a e100 but in a crazy angle but allows the fit of a biger turret ring

[@VK90Productions]

Day 1 of asking PatchBits to do the VK 90.01 (P) German Superheavy Tank

[@TheWhoamaters]

This feels like a German Sherman, much more compact and economical to produce than things like the Panther, Tiger, etc

[@tommeakin1732]

I feel like I should know this, but does Sprocket deal with layered plates roughly as you'd hope it would? Like there's no fuckery with spaced plates just absorbing shells is there?

[@combatfox7009]

I feel like I'm looking at a more mobile version of Elefant (or Elephant maybe?) tank I think the part "not quite right" thing, I believe the top front of Panther's turret has a slight angle

[@Waskotorowy]

A question for patch : Do you watch --Daebom-- any warthunder youtuber and which one is your favorite?

[@AlRizz187]

This could be a cross between the experimental panzer 4 with panther turret (which obviously failed due to being heavy) and the normal panther and a little bit of french inspiration.

[@edwardhorner7368]

Has vibes of the Hungarian Tas Major with the hull shape and general premise. Just would never have used a Panther F turret and would have had a 90mm gun.

[@ianskinner1619]

meh, I think the germans would have realized how effective the IS3 shape was and made a move to adjust designs to be more like that..

[@bobbacon1398]

This guy is such a Hidden gem oh my god

[@ComfortsSpecter]

Great Vibe Good work I Love Intuitive this game Is Just drop in and make something Cool in an Eve

[@Nikdy_]

try to build the strv 103 like tank with the new internals, i think that woudl be good to try, with the tank distroyer desing and the aiming with the hull with internals, i dont really know if it would be possibel but you can try, i think it would be good to try :D

[@AstroGamer_da_real]

"Short-hair Domestic A"

[@markdombrovan8849]

Could you maybe add a timestamp to human tetris? Adding timestamps for every little bit would be too much, but human tetris is the coolest part

[@peanut7098]

There actually is a Lynx, it's the Panzer II ausf. L or Luchs. Luchs is German for Lynx

[@Frieze_XD]

I figured it out! This isn’t small, it’s just the sport panzer! Panzer Superleicht

[@DrippyRussianForever]

Theres a counterweight option when selecting the cannon breech, i belive its in the traverse time section but im not sure EDIT: wait no its under the balance section

[@inductivegrunt94]

Pretty fast and light for the Panther II. The design looks really great and it functions pretty darn well.

[@Tupolev.114]

Lol love the videos man, keep making them. The turret u kept calling the panther 2 turret is actually the schmalturm (or something like that I don't remember rn). It was intended for the panther f insted of the panther 2. That misconception is because of warthunders fake panther 2 (thanks great snail again)

[@MJesDK]

The last design for the Panther 2's turret, the "Schmale Blenden", wasn't all that different tbh. It had a square gun mantlet, and no rangefinder, but otherwise the dimensions were much the same as the production Schmalturm. Weirdly, the early Schmalturm design that followed the Panther 2's cancellation added an oddly sloped roof, which was again ditched for the production model. World of Tanks ironically enough chose to have its Panther 2's default turret be the oddly sloped one. So no one gets it right.

[@LinkLaine]

i can't believe how fast you can switch themes while monologing. i really envy about that ability

[@DAH_WHAFFLEZ]

jagdlynx when?

[@LilBeepBop5063]

dumb answer ab panther II, hull was made, turret (as presented in wt) is completely made up

[@god6532]

lol Looks like the AMX-4

[@tanaka7186]

5:45 - The Lynx already exists by the way, it's the Panzer II Ausf. L

[@aworthlessmanofnoworth7041]

i suggest making the sideskirts a little bit thinner? actual sideskirts on most german tanks were 5 - 8 mm i believe

[@V3lk0n]

Ok so this looks like a tiger 2 and a panther 2 had a baby and this heavium popped out.

[@Intremental]

Finally my boredom is cured Fr tho love your content both fly out and sprocket

[@myththegoatlover]

7:34 the cut/hatch at the back of the turrets are usually to help make loading in tank shells into the turret more easier to do as far as ik

[@waterfox2492]

Nice tank but... isn't the driver port missing ? 🤔

[@PatchBits]

Damn. I totally thought about that and then forgot while building it too

[@waterfox2492]

@@PatchBits Let's say the commander is the eyes of the blind driver and order them where to go. 😂😂😂

[@ianhiemstra2316]

Ok medium tank it is .but it looks like a panther and a pz kpfw iv lol

[@Hans1871_AndSchnitzel]

Hehe... Pamther

[@Frieze_XD]

Hey, what’s your favorite plane and tank ever?

[@macncheese2029]

Voinechese :3

[@pontushaggstrom6261]

Panther II was a prototype. And that's it. Very much the same tank, but with thicker armor and with some new feature from the tiger. Never produced, but the drawings was used for the E-50 project

[@nekromenace-uv6ip]

it looks like a weird mix of the panther and the pz4 in the hull

[@Lazarusgaweseb2438]

The Panther has 192 penetration but I see 212😂

[@L3Horde]

I LOVE YOU PATCH BITS

[@National.Cateography]

brother the panthers had like 5* per second turret traverse

[@derivenloki2260]

Looks almost like a Panther mixed with a Leo 1

[@astrorick2910]

2:52 the Panther II was never intended to have an 88mm

[@kakakiri2601]

make edelweiss tank, trust me is hard

[@That1British_Guy]

People watching in 2025 👇

[@flimsysteve]

Tamnke

[@kartitart7602]

I love the description

[@rmsatlantic]

I love how rambly you are lmao

[@FROGGKINGG]

Does anyone know what the cuts in the back are for in the panzer 4 hull?

[@Bl.sporti]

build a tank, in flyout

[@ViperGTS_R]

So, this is a panther 2

[@A3319]

Westland Wendover tho

[@PedroCosta-po5nu]

Less angles panther f

[@irisprotogen4917]

The Half Panther.

[@SMV-CC88]

No ram damage?

[@tifo5258]

tanks irl dont angle so your design isnt unrealistic because of the front armour

[@THE_MUN]

Old tanks like the panther did angle

[@tifo5258]

check your facts and stop writing bulshit online before you know

[@THE_MUN]

@@tifo5258 every i have checked says they did angle there tanks

[@THE_MUN]

I mean everywhere lol

[@THE_MUN]

@@tifo5258 it did not happen to much because of how tanks fight but it did happen

[@KauppaKomissaari]

Angling isnt really something you would do irl just makes very little sense in a tank also the us 76m1 is actually 75mm

[@abas656thegodemperor9]

Every tank beyond ww2: 🗿

[@osmacar5331]

Hetris.

[@leeionicatlas6461]

historian here for clarification: the panther ii concept DID exist, and one hull was built! but had essentially absolutely NOTHING in common with the gaijan panther ii. its really more of an "upgrade" for the purpose of production. it had some common parts with the tiger ii, and a bit thicker armour, but thats essentially it. its currently displayed with a spare panther ausf. g turret, in the end it wouldve very likely still used a 75mm gun and a G style turret, not the F style like in war thunder. as for your design, angled cheakplates are actually a design dead end, the extra armour they provide is undercut by the fact you just genuinely have even less space. its more for light vehicles with little to no armour than it is for a medium tank. its also harder for production, youd really just want one big flat heavy plate in front. en.m.wikipedia.org/wiki/Panther_II_tank

[@froggy-doggy]

Not putting a cat picture on the screen is a crime against all of us