I put the DXE-TFK46-HD from dxengineering.com together. This is a 46ft heavy duty, telescoping fiberglass mast.
Пікірлер: 33
@djjamminm12 күн бұрын
Just received the pole, I guess the cam locks come separately, that pole came fast! Waiting on the guy rings, the rope, cam locks and the steaks. 😃
@kj7iaz11 күн бұрын
Nice. Yeah it comes in different packages if I remember right. Let me know how it goes.
@austinlitmanaklitman Жыл бұрын
Thx Jeremy. I'm also an Extra (N4AKL) and have a limited backyard area. I am in the middle of a small city surrounded by Dallas, TX. Technically I'm prohibited from putting up an antenna so I've only used portable antennas thus far. I'm working with an attorney to see if the City will relax their rules and allow an antenna. Until; then, stealth may be my friend. I've looked at this model as a possibility and searched for the antenna model number and there you were. Thanks for the guide & ideas. If you want me to, I'll share what I end up with for my mast installation.
@kj7iaz Жыл бұрын
Thanks for reaching out. I'll tell you, this mast is not discrete lol. I've taped dipololes to the wall before and it works. There is also mag loops. Endfed halfwaves are fairly easy to hide. Feel free to connect by email or Facebook, maybe we can come up with some exciting ideas.
@KC9UDX9 ай бұрын
My village prohibits antennas. But state law prohibits villages from prohibiting amateur radio antennas. Go figure. So I just put them up and so far (eleven years) nobody has bothered me.
@kj7iaz9 ай бұрын
It's been my experience that people are often fascinated with ham radio and almost everyone knows a ham from way back lol. Antennas have been a great conversation starter.
@MrSportsphoto3 ай бұрын
Which antenna did you put on it and how's it working out?
@kj7iaz3 ай бұрын
I use for a variety of antennas. It's great for experiments and testing. Check out my antenna series.
@kd5you17 ай бұрын
I bought the 28.5 foot Max Gains Systems mast which is similar to the DX Engineering several years ago, but the prices have increased dramatically over the past year or so. I chose the 28.5 foot HD mast because I can reach the top without using a ladder, and I didn't want to have to lug a ladder around in my car. For using 2 meter simplex and repeaters, and for HF inverted V antennas, its be adequate. 73 KD5YOU
@kj7iaz7 ай бұрын
Yeah, I definitely wouldn't recommend this for a portable mast. It works great as a semi permanent mast though.
@C_Law Жыл бұрын
Nice!
@kj7iaz Жыл бұрын
Thanks!
@kchedville3 ай бұрын
Can you say what is the size of the pole on top the Mast? Looks much larger than the photos on the DXEngineering web site....
@kj7iaz3 ай бұрын
Not sure, the manual might say. I'd have to measure it. But it is bigger than expected. Works great though.
@kchedville3 ай бұрын
@@kj7iaz Thanks for the Reply
@bitemykrank197010 ай бұрын
Nice mast if you live in the USA.....to get it to an island in the other hemisphere, it's almost $200 MORE than the item costs for shipping....almost $800. That's a LOT for some bits of fibreglass.
@kj7iaz10 ай бұрын
Oh man. I'm sure there is something more local that makes something similar .
@user-yv3xb7to1z7 ай бұрын
well done looks very good and strong all the best Allan G6TMO Stoke on Trent Uk
@kj7iaz7 ай бұрын
Thanks, and thanks for watching
@briangohl25477 ай бұрын
If this will be used for more than an occassional set-up, the fiberglass poles should be painted to prevent UV damage. It is unbelievable how quickly fiberglass will start to delaminate from UV exposure and start growing "hairs" that will make the mast very uncomfortable and irrating to handle.
@kj7iaz7 ай бұрын
I would have to find the docs that came with it. If I remember right it says specifically not to paint it (maybe to sell another one sooner lol) and it was coated, painting would keep it from operating correctly because of the tight tolerances.
@gary621211 ай бұрын
Exactly what I was looking for. This is an 800 USD-ish mast, I really am wondering how it compares to MFJ's HD 50' mast that is about 300 USD-ish. I did notice the OD of the mast is a little bigger on the MFJ.
@kj7iaz11 ай бұрын
Thanks for watching! Not sure where you are from, but this one is $240 usd on dxengineering.com. If you need the little extra height, the mfj might be a good option too. The carbon fiber ones are alot more money.
@gary621211 ай бұрын
@@kj7iaz Yes, I am confusing this one with the: DXE-TCFP-49 which is 850 USD. I'm amazed that that one is so meaty for only 240. I wonder what the big difference is between the DXE-TCFP-49 and DXE-TFK46-HD (besides the 3 extra feet) that make worth an additional 500 USD. I wish I could find a comparison videos between the DXE-TCFP-49, the DXE-TFK46-HD, and the MFJ 1908HD. DXE-TCFP-49 is carbon fiber instead of fiberglass, but I'm not sure that is worth 500 bucks more.
@kj7iaz11 ай бұрын
The carbon fiber one is way less weight. And shorter when collapsed. The one I show is a good option for a semi permanent install. The carbon fiber, would be better for field day/pota, etc. If i ever need to move mine it's easy enough to do, but I wouldn't take it to field day. I hope that is helpful.
@sohailanjum49972 ай бұрын
Thank you for sharing it. VE3ITU.
@kj7iaz2 ай бұрын
My pleasure
@mattz-bt7ml6 ай бұрын
Where did you buy those clamps?
@kj7iaz6 ай бұрын
The whole kit came from dxengineering.com
@vinnyboomba99486 ай бұрын
How is it holding up?
@kj7iaz6 ай бұрын
It's great. It's been up since the trap dipole video with no issues.
@vinnyboomba99486 ай бұрын
@kj7iaz nice after your review I have one in my DX engineering shopping cart
@kj7iaz6 ай бұрын
@vinnyboomba9948 haha yes. My dxengineering wish list is full. Maybe they will take note one of these days and send me some stuff to play with haha.