Building Octobans

Here is my project for building an octoban set. It is playable right now but I need to build the 5 remaining drums.
If you immediately want to watch the sound test, Go to 9:09

[@IndieTimberStudio]

Since I’m getting a common question, here’s the answer: 6’ diameter pipe won’t fit to the 6’ drum rim. Chain hardware stores, like Home Depot and Lowe’s, don’t carry diameter between 4’ to 6’ so I recommend going to the local pipe store. I also recommend buying/ordering drum rims first so you can take it to the pipe store just to see it fits before buying a pipe.

[@jwoodard117]

Ok, so you said 6" doesn't fit.... but what size did you actually end up using????

[@dangilberts9295]

These are great. I tried this a long time ago and you exposed all of my mistakes. Thank you! The octobans sound great and would be great for marching band or a drum set addition.

[@charliewestman2958]

This video was great! I really liked it.

[@IndieTimberStudio]

*update* I just got the other 5 done. Now it's ready. Just to let you know that "Foxy Phone Guy" is almost done. Just few more clips and music editing. If you worry about the dog, Penny, she don't mind the tool working. She just didn't like the sound when my dad was changing the smoke detectors battery.

[@robertbarba6182]

IndieTimber Studio jj

[@belencabezas6595]

IndieTimber Studio f72

[@pooja-amjeygroup7171]

IndieTimber Studio

[@maldiniputrasurahman3818]

IndieTimber Studio .

[@rosaliadwi1139]

+Maldini Putrasurahman persija jancok

[@mezdrums]

Amazing! Great work dude. They sound killer. Police!

[@nadialaredo5455]

Ytuf

[@nadialaredo5455]

Ttryh💖

[@marktegeder2455]

Nice work!

[@thebrawnysquirrel6344]

I am quite late but I have to ask. I know very little about drum hardware. What exactly did use for the hardware? I know Remo heads and PVC pipes for the main drum, but what for (I think)the hoop and that stuff? I am sorry for my terribly vague question. Thank you!

[@andrewmurphy5310]

Cool build and they sound pretty cool. You can still hear that pipey sound though.

[@tomoconnor9164]

Great job Sir 👍👍👍

[@emilianocoldesina6227]

Hi. can you tell me the thickness of the tube you used? thank you

[@Quartiano]

The sound test sounds like “Lean on Me”

[@paidigepeng7842]

Amazing

[@rodrigotomasf]

Great job, man. I'll build my own based on your experience

[@IndieTimberStudio]

That's nice. Feel free to do something else that is better than my take.

[@standardannonymousguy]

Thank you for sharing, it is good to see how you made them and they certainly do perform well (9:09) Might I ask you though, why you did not consider using wood such as wide bamboo or making somehow a curved wood similar to that if the "toms" on a drum kit. I imagine because it is more expensive/harder to find the wooden pieces. Thoughts?

[@standardannonymousguy]

Imagine "the pipe guy" playing his pipe master pieces on an instrument made out of bamboo! (Difference in tone)

[@albym.a.n.2643]

Fantastic

[@AngryBirdsFanboy06]

cool video

[@kalebbarkley5208]

5" schedule 20 pipe is hard to find. Most local plumbing supply houses in my area don't have it either.

[@henriquerita1723]

❤ colorful sound

[@ushahm1662]

Nice

[@randaldavis4880]

What was the total cost to build , what was the bearing edge of Deg, you used on the router ..

[@hdrjunkie]

What type of bearing edges did you use?

[@RebeccaDrake-vd5iq]

where did you buy the heads and rims and stuff? sick drums

[@mikewaine5433]

Just for knowing my Octoban Bros. there is 6" OD (Exact!) ALUMINUM tube available from Airflow Systems in Tukwila WA...$12 and change a foot...(I believe they ship too)...way better than 5-1/2 OD PVC and richer sound than acrylic ( I have made both sets) Remo heads/rims fit snugly and sound awesome... I dropped one from 4Ft. off my kitchen counter by accident with zero damage...they are bullet proof....my acrylic one would have shattered...use same procedure as in this dudes video...just use better material! If I could post a photo of them I would. I applaud this guy for his ingenuity but if you're gonna spend all that money on rims and heads....spend a few extra penny's on Aluminum tubes, you won't be sorry!

[@DustinOuterSanctum]

I was going to ask what diameter pipe was used.... hmm...

[@joshuakelly2665]

I don't see a website for that place? Got the one you used to order the aluminum?

[@jenshendriks9092]

I'm sad that you didn't gave them all the same color. I mean, it's a set right?

[@betooliver6799]

What are the measures dos Pipes?

[@nelsondevendra3377]

Sir i want one for my concert how much Rs ₹ set

[@AlexBigMac]

I like the foxy shirt

[@user-of8gq7uo8o]

What is totaally measurements ???ty

[@rhythm-t3023]

I would love to have at least 2 hi pitch in black. Can you hook me up?

[@markt44]

aight Im not that into fnaf anymore.....but where is the second anniversary vid?!

[@IndieTimberStudio]

I was going to work on that but I got tied up with other project such as "Foxy Phone Guy" animation and FNAF original song that year. After that, I lost interest on that project.

[@MEnRE02]

Hi. What size pvc pipe did you use because a 6" pipe is to big for a 6" hoop. I bought a 6" piece of pvc to do the same thing but found out a 6" hoop doesn't fit.

[@IndieTimberStudio]

The answer is in the pinned comment.

[@obateraph3667]

Muito bom!

[@ArtGuitarLTX]

When you were playing those octobans around @06:51 it sounded like the melody to "Lean on Me" 😅🤜🤛

[@andredeblieck8183]

Do you have to show all 4 if them?

[@lalhmunmawiapachuau7777]

Great work. Do they seem to last long?

[@IndieTimberStudio]

Still standing, so far but I still have to be careful while traveling.

[@lalhmunmawiapachuau7777]

@@IndieTimberStudio Thank you so much.

[@yochanman]

I’ve looked all over for the right sized PVC diameter, where did you find your PVC pipe at? Assuming it is 5.5” diameter PVC for it to fit the 6” drum rim

[@IndieTimberStudio]

Read the pinned comment.

[@yochanman]

IndieTimber Studio gotcha. Appreciate it. I’ve checked around local shops here and nothing. So there was no where online you found the custom sized diameter PVC? It was just a local shop for you

[@IndieTimberStudio]

@@yochanman actually, I had to go out of town for the better results.

[@joseniltonaraujo4039]

👏👏👏👏

[@erik.indmus]

its PVC right, where did you buy the rest of the parts?

[@IndieTimberStudio]

It's PVC. I ordered at the local drum store.

[@sholahudinnajmi1918]

Thanks you

[@fivenight1826]

nice whe dont see jeremy face ^^

[@IndieTimberStudio]

Don't worry, I get rid of it when it's finished.

[@jonathandivi4687]

Okay Stewart Copeland

[@sakthikarupasamy2046]

Super

[@minomiccoli3706]

what material are the drums?

[@fardingandpooping4005]

Mino Miccoli I think pvc pipes

[@VICTORNLB]

Buen sonido las medidas?

[@ayhanaltay3486]

Òlçü konusunda yardımcı olabilirmisiniz

[@arceecorso]

How much to buy them off u ?

[@IndieTimberStudio]

I ordered the parts (including rims lugs, tension rods, and head) for about $100-200 dollars just for first four drums. I don't remember the cost of the PVC pipe. I also just finished the other five, which it's now complete.

[@Brandownage27Gaming]

IndieTimber Studio where did u get the pipe?

[@micah_drums]

What bell cymbal is that in the second to last song?

[@IndieTimberStudio]

LP 9" Ice Bell

[@micah_drums]

IndieTimber Studio Thanks!

[@jerfesonsaj8658]

Muito bom

[@manosliapakisthestormrider8099]

Is so same with real niceee

[@mysteryfive2651]

Magkano po ang 5 set??

[@Jb-dd4em]

Albert Viray Hindi ko alam

[@jrpercussao8949]

Tinha como mándar um vídeo com os detalhes em português no caso escritas brasileira

[@joaopedropedro9065]

fico top 10 muito bom

[@dinhobraldinho3497]

Os octobans ficaram lindos, apresentação do projeto e sonoridade pobres e o suporte deles em madeira, um lixo

[@danielpereira4061]

gostei Brother

[@Brandownage27Gaming]

What size pipe (diameter) did you go with to fit you heads?

[@IndieTimberStudio]

I would go for less than 6" and more than 5." Chain hardware store don't carry these. I would recommend getting a drum rim first just to see which it will fit.

[@Brandownage27Gaming]

IndieTimber Studio i work at a music store, i have access to the heads so i grabbed a 6” remo pinstripe. Quickly figured out yesterday that lowes and home depot only have 6” OD (which tried and was too big) My problem now is i don’t know a place i could find a pipe for the sizes you’re saying. Ive looked online to but to no avail. Any suggestions?

[@IndieTimberStudio]

Just like I said. Try the local plumbing store.

[@bobby9727]

@@Brandownage27Gaming What you need is 5'' schedule 40 PVC pipe which is hard to find but is available at plastic pipe suppliers.

[@Semuel36]

Freddy bonnie chica and foxy

[@alansanchez810]

where could we find the measuruments you took? and all the material needed? any suggestions on where to get them? Tbh, I would prefer to use the stand made for this, rather than a piece of wood, but other than that, awesome!

[@delimac59]

That's how fast my boss expects me to work!

[@fardingandpooping4005]

Like really long spock drums

[@SamsungJ-dr4vv]

yes feriget

[@Propriedadesimoveis]

Vc pode fabricar para mim??? 2?? 45 e 55.

[@objectdrumers8183]

We can't see what is happening

[@vavasadventures1486]

Object drumers I'm to

[@TurtleTurtlez]

Cut the pvc to size Sand edges Rout edges Measure and drill lug holes Paint Install hardware

[@saulivanhernandez4519]

🙌🙌😂🙌🙌🙌

[@user-pb2hj7kj1y]

حخمن

[@febrifebri7834]

Brp itu harga nya

[@yhanniebandin4494]

9:09

[@saurabhsinghaniya7153]

jbrrrr video

[@gilangjepara1835]

Dijual tidak

[@ericmsandoval]

Lol the end. Wtf

[@DrummerGrrrl]

Ha ha! Looks like your cat wanted to help.

[@ferdika0647]

02:36

[@journees788]

Hi

[@rerengjr6797]

Pinten

[@ashleycaul499]

Police

[@TurtleTurtlez]

*Stewart Copeland

[@IndieTimberStudio]

He's the probably the reason why want to get/make these.

[@jorgepina7451]

Stewart copeland best drummer ever!!!

[@tatoandradeff1039]

Solo muladas

[@anilsawang1405]

game matix

[@RajeshRajesh-dk2pv]

matrix gamerr hi

[@rerengjr6797]

Ke

[@TheCOZ]

You don't explain much

[@yohanasianturi7223]

no

[@mantomanto3357]

Berapa harganya

[@parmarhargovind2431]

#very_fast

[@objectdrumers8183]

It is so much fast

[@fabianrojas6756]

The test was so short... :(

[@rajton9366]

Raj

[@Hafizzaaa__]

Jdjrhl ialova devai aju tay

[@aderohimat8691]

Jnkkk

[@luizmorreira4631]

Luiz

[@rheuelleandro7328]

luiz Morreira r

[@arifsetiawan6273]

Dafa

[@jaimesorli2436]

sounds amazing but you work really bad and with a lot of imprecision, specially for make the holes for the lugs, the pipe is less than 6 inches, all the screws go really bad from the hoop to the lugs..., this gonna give you a lot of problems for tunning and stay tunned long time...., you need to put some peace beetween the lug and the shell for repair the problem...., if you do that and you paint they with quality you make a really nice octobans, the mount are really cheap and bad, better one tom bracket on everyone...., but sounds really good....

[@sansungsmart9736]

Ficou legal nao. Nada haver e pouco conteudo

[@rerengjr6797]

Nek tumbas linten

[@catmanisgod8200]

Very sloppy work.

[@RebeccaDrake-vd5iq]

where did you buy the heads and rims and stuff? sick drums

[@michelena10]

9:09

[@azaelgonzalezkeys9358]

9:09

[@alexandresantana268]

9:09