Building Short Bus Bed Platform - Solo Female Skoolie Conversion

[@Blueb5ers]

You need some sort of support near the middle of that bed. Suggest studs at both the aisle sides of the wheel well and again at both sides of the door opening. That way you will still have the main storage at the center and usable storage over the wheel wells. would also suggest screwing bed against the sides of the van so it doesn’t wobble.

[@EarthCamper]

This building and living in it is life for me.... I saw a video of very high end coach RV.... It was good ...fancy ... But for me building our own camper is What makes me happy.... Way to go. 👍👍👍👍👍

[@pdarling6812]

Your tiny home on wheels are coming together beautiful👏🏽🦋

[@skeetermalcolm1655]

So happy for you jaylena,your build is looking great

[@TravMaxAdventures]

Coming along nicely Jaylena. If it were up to me, I’d put some angle braces along the wall sides, and then a center brace along the middle section. That way you’ll have support and a barrier to divide your bottom two sections. One side for a closet and the other side for recreational supplies and tools. Keep at it.

[@ChicagosSinfulSwede]

Yes!! Look at you out there doing the damn thing 👏👏👏 I am so excited to watch your vision come to life and I've got this feeling that your bus is gonna be cozy & amazing

[@reneegriffith2375]

You need to put support in the middle of the bed so it won't start sagging. I would build a place to put your fridge/cooler under the bed on rails so you can pull it out to use it and save space.

[@shaunwalker9869]

Good job but i agree the bed needs more support!!! I appreciate videos like these, that means theres still kids out there that appreciate our country!!!, i wish i could be you, i got to much debt and not enough smarts!!! you kids tho let guys like like me live through your eyes till i can!!! I appreciate that!!! you keep kickin ass ok!!!

[@georgevelt7125]

Surely you’re always honest . Of course you won’t be too disappointed if your expectations sadly you never get the thrill of success either. You can do anything you want , but in all things do your best

[@debragarza6867]

Jelena sweetie you are doing an awesome job take all the other comments and suggestions in stride you're doing a good job and hats off to you girl

[@jo100]

The inside of your Bus looks very very very cool Jaylena ☺👍

[@Laura-hk4th]

😃 Aww Yes.... Messy bun space matters ❕ Great job Jaylena ❕

[@brendaunland4407]

Yeah, add some support legs in center of frame. If you can frame around bottom of frame you'll have a good solid bed.

[@brucewarnock4661]

Yes, instead of one big area under the bed, I would make two areas under the bed, a 2x4 structure with plywood wall in the center under the bed frame, this will keep the bed frame from sagging in the center from the weight of the mattress and you when sleeping on it.

[@pemman]

A super lady with super productivity. Yes, extra support in the middle. Nice one :)

[@neoncatfish3585]

I would rebuild the frame and turn the 2x4's sideways! Then you could just screw the frame into the wall! Then you can double up the front board, that should make it strong enough for anything! Stay safe young lady!

[@stevenhenry8326]

Good job Jaylena, looking good. The middle section of the bed will start sagging without additional support I am afraid.

[@danbartleson9880]

I was going to mention same thing, she does excellent planning and execution to get things done.

[@usagirl4188]

Maybe some that atleast fold down and lock into place. But she is really cranking out the build. She looks better than she ever has since I've started watching videos that includes the ranch rebuild.

[@usagirl4188]

Jaylena, idk how high your bed sits,but, could you possibly gets two sets of dressers that aren't heavy ,maybe from Ikea and place them in the middle for braces. Place them back to back. One facing the back doors and one facing the front. And try to make some sliding closet doors in front of them out of thin paneling and add handles. That way you have storage for small clothing in back and storage up front for hand towels utinsil ect. And if you wanted you could get those tention rods and place on one side of the back dresser and van wall to hand things. Idk if any of that would work .just a suggestion.

[@usagirl4188]

Hang*

[@kayashmore4296]

Support from a 2x4 is on its side. Laying flat they tend to sag.

[@neilchilds7555]

All I have to say is that little person has a smile that shon brighter than the sun 😁

[@offthehookwithnia]

Great job Jaylena! You are rocking right along on this bus build 🎉

[@par0104]

You are going good girl, but my suggestion would absolutely be to add support right down the middle under bed, & remember to turn 2x4's on their edge instead of lying them flat. If you are concerned about storing large things under your bed, you can make the extra support on a drop down hinge or lifted-up hinge. Better to add the support now than to wait till the bus is full & then realize you need the middle support. Lovd watching you build. Prayers and blessings 🙏

[@kathygirlygirl4109]

Jaylena, I just saw a woman's van that is one of the coolest I have ever seen. You should check out Jordan Osmond and the title is "This womans stunning camper van is the best I've ever seen!" I think you could possibly include some of her idea's into your build. One of the cool things she did was under her bed. Great ideas. Never saw that channel before but I was curious. You are doing a great job on yours. Keep up the good work gurl.

[@stephenc2224]

I think you are doing an amazing job with the build and understanding your self worth. Remember you must love yourself first and then all things are possible.

[@franksantos4680]

Awesome G🙍‍♀️.... getting there , your dream it’s coming along ya 👍🏽❣️

[@lindatemple5454]

Good bed frame, maybe a support or two in the middle and I like the idea of extra support next to the wheel arches.

[@barbaraspan1437]

I got so excited when I saw the framing for the bed going up. I was shocked at my reaction, lol! This is it! So close Jaylena! You have done a great job.

[@MommaJessiesCraftyHomestead]

Looks so good!!! Great job and can't wait to see the next video!

[@stevelamrock4039]

Buy two lengths of 1 inch steel angle iron. Bolt to studs the full width from one side of the bus to the other. That will be strong and you won't need supports in the middle. It will leave the middle open as it is. One piece at the back of the bus and one price at the front of the bed. Cheap and strong. You are amazing by the way. Keep going ahead.

[@mrmotofy]

1" steel will still bow

[@stevelamrock4039]

@@mrmotofy Your wrong. With her weight the wood alone held her up as seen in the video. She might weigh a 100 lbs. The angle iron. (Not flat bar) will more than hold her up and more.

[@mrmotofy]

@@stevelamrock4039 Over time and humidity it will sag guaranteed

[@stevelamrock4039]

@@mrmotofy humidity will make steel sagg. That's a new one. Where do you buy your steel. You can't fix stupid

[@mrmotofy]

@@stevelamrock4039 Yep can't fix idiots that can't figure out the humidity makes wood warp. Go back to whatever you were doing cuz intelligent conversation ain't working for you

[@-...Patricia...-]

Cool family and family projects!

[@donb6474]

I saw watching the fan in the bus while you were building the frame outside. Put 2 2x4 on end screw under the 2 existing 2x4 you have for the frame. Also add another brace on both sides of the door. That should do it.

[@AmyJost1976]

super cool!!!! put drawers under it like the plastic staking ones leave a channel between so your cats can hide behind them storage and a play place all at once!

[@extremedoings]

K you should definitely put some reinforcements right in the middle because all the time I am the bedframe will start to sag from the weight of the mattress and sleeping on it definitely put something in the middle to support it everything looks amazing and so do you as always so beautiful

[@ellieporter23]

The intro is exactly how I feel about my bus build!

[@marianfrances4959]

Bed frame looks great and look at all that storage underneath! 👍😏🇨🇦👌

[@debbiew.7094]

Middle of the bed needs supported! But you go girl! Awesome so far!😊❤😊

[@AuntieAnn]

Excellent! 👍... It's starting to look like a home 👊❤️

[@Weaver1202]

Ha! Nuts and tuna out of the package! Totally what I do all the time!😂

[@CaliforniaBushman]

Just left all those comments today on how to fix your bus idle problems. Maybe you nixed them? Didn't realize you post a lot. Funny thing is, I just saw your old van you just sold. That's my van! I have a 1993 Dodge Ram B250. Same exact doghouse, even. Rebuilt the transmission in 2016. A SoCal van. No rust yet. Fully loaded, great shape. Your Bus engine is pretty much the same engine as your old van. Maybe a 340, or 360hp V8? Same parts. Same intake, and typical idle problems a B250 has. Same parts at O'Reilly. No worries. You'll fix it.

[@CharlezRichard]

Great job but I still think the frame is too high. Add the mattress plus your bedding to it and you will see what I mean. It's about 4 - 6 inches too high. You will also find you bed frame warp in a few months because your frame's 2x4s are positioned incorrectly for strength. A 2x4 when laid flat, will warp. Especially pine wood which is what you used. To correct the problem instead of redoing everything, add 2x4s underneath each long 2x4. Instead of adding it flat, stand it up.

[@kevinjefferson3957]

You'll probably be sectioning for storage and other things under the bed frame thus adding more support. Might want to do something temporary until then.

[@Hangin_With_Shane]

You should frame your bed to the walls sturdiness and support. Right now it will be wobbly and weak in the middle! Frame the ends of the bed at the bottom of the windows and maybe think about a small cubby storage on one side since your mattress will not fill the entire space! So far I'm enjoying your content and progress!

[@Blueb5ers]

😳How is your comment from 4 days ago? 🤔 Do you own a time machine?😂

[@Hangin_With_Shane]

@@Blueb5ers ha ha ha, I just happened to watch as soon as she released the video!

[@sarabeth3016]

@@Blueb5ers this video was available earlier by going to her build series playlist, not sure why it wasn't just uploaded regularly but I think that's why most people didn't see it when it was originally uploaded

[@kelvinrwalker]

Should add a 2x4 perpendicular to the other 2x4 under each railing. The way you have the 2x4 railings will bend over time and may crack. Just my 2 cents worth. If you are going to add plywood to the front and back will offer the same support and you can always cut out areas in the plywood for access.

[@lucygoodwin5259]

You are making good progress congratulations

[@ritatoussaint5118]

U Rockin this Jaylena!!!🥰❤️

[@kathymorris1944]

Looks so good. You made it look so easy. I’m not so afraid to make a bed frame.

[@FrethKindheart]

Great job! I agree with the others, the middle needs support or it will sag over time.

[@glennhunter7018]

Good job on the bed frame looks good keep up the hard work on the bus it is looking so good pretty girl be safe

[@gloriakelley7383]

Yea you need to put support in the middle and then you can split the area into storage in front and garage storage in back . Looking good!!

[@willie2938]

Well, I think this has already be mentioned a lot. But hay I got to get my $.02 in. Yes I think you need a support in the center of the front. But on the back for storage in and out I would put a center support Horizonal on the wall or even one the door so the door can still open because I heard you say you want to build a deck on the back... Great to see you home safe dear...

[@CLSearles]

👏🏽👏🏽👏🏽👏🏽👍👍you should add a support in the middle of the bed but you are doing a amazing job 🌹

[@Thelegend-gt5lb]

Best things in life turn out when you just wing it 🤗

[@Lucas_Terry]

Back at it again! Looks awesome! Cant wait to see the end results.

[@tracytavares1365]

This is where all the Pro Nail Bangers are gona spank ya . What eva works for you is just fine . Thanx 4 takin us

[@JaTon]

I would drop it down 5-6”. Maybe add an extra leg in the center on each end instead of by the wheel wells.

[@StarLord1989.]

It's getting exciting now can't wait till your finished so you can travel and be happy exploring the world. It's looking good like the idea of extra support under bed frame make it stronger. Lots of room for storage under there...

[@lbar4759]

I learned from an old A/C guy. I never work outside without a box fan, no matter how long of a cord I have to use. Keeps you cool a d the bugs off of you, even if I'm just pulling weeds.

[@ayekhine1609]

Beautiful bed on beautiful bus 👍

[@patstinson5167]

Good job Jaylena! You need support for the center.

[@connieriggs8744]

great job ! a job that you started on and finished it 2 I'm very excited for you it was a tough road but you made it God bless you and all your journeys and family to God bless

[@michelemunroe1422]

I would put a horizontal piece of wood on the floor in between the vertical supports for extra stability. It’s looking great.

[@lindaltsteele1313]

Awesome ... Your a hard worker , Will take you far in Life .

[@randalluther1432]

You're amazing girl! I love watching you work! 👍 👍

[@synseer8484]

Grateful dead tour bus vibes!

[@girdygolden7041]

Great job Jaylen!!💖 Great to see you pressing on with your build. Its going to be awesome!!👋🥰

[@boxerloverakavalerie6997]

I think u r doing a Great job, just goes to show wome can build stuff just as good as men. Girl power💪💪💪

[@lauramroberts07]

Great job!. The reinforcements next to the wheel wells is a good idea, maybe a center post underneath? I love how you keep forging ahead and complete something each time. Your videos get better each time, keep it up.

[@peterc6285]

Looking great! As some others have said, the long 2x4s should be on their edge, because when they're flat like that they can flex, when they're on their edge, they can't. You'll have a super stiff structure if you do it that way, and will never sag because it can't. Because otherwise the way it is now, over time your bed will sag in the middle. It means re-doing it though!

[@mrmotofy]

Legs are likely to be wobbly. Screw a cleat to the sidewalls. A horizontal 2x4 or 1 1/2" angle iron. Drill 3/16" holes where screws will go

[@christenholbrook7097]

It's coming along so nicely. You will be finished and off to some new adventures in no time 🥰

[@georgiapeach7832]

So happy to see another video today. Looking good!

[@lyndabuchholz1216]

Too late now but if the 2 X 4's were put on their edges in the build they will be stiffer and may not sag then. I am so enjoying watching you build this bus.

[@sineadhughes4479]

I would put more support beams in the middle of the bed so it don't break over time. Great job though

[@jasminsantos9146]

A Blessed morning to you. Keep safe. 💖💖💖

[@barrydeacon3551]

Split the storage under the bed to two. 2x4 wall in the middle increase strength of your bed. Hopefully this helps

[@beckymerriner2493]

How’s baby was that so cute loved that smile you got from the baby

[@francescampbell4731]

Just watched a video, DIY car camping kitchen box by Todd Parker, and when he showed his fresh water storage container, I thought of you. He uses two WaterBricks 1833-0001, they hold 3.7 gallons of fresh water each and are like Legos where they have a female and male component that clicks together for easy storage. He has two for a total of 7 gallons. They are stackabIe or could stand up side by side like he stored them. I don't know how to attach a picture here for you to see them, but if you check out his video you might be pleasantly surprised. His method of running water is neat, too. The faucet doesn't require a foot pump, but is chargeable like a cell phone and gives water at the touch of a button. Hope you find this helpful.

[@barrywhitlock141]

It was such a pleasure to see you making the bedframe, I agree that you have to have a center support to be safe, I also think it is a couple of inches too high. I don't want you to keep banging your head on the roof. don't forget that although you can sit up your movement on and off the bed could be a bit hazardous.

[@barbaraburke2937]

Good job, Jaylena, I would reinforce the legs that are near the walls to the floors and make middle legs for reinforcement too, this way the whole bed frame won't move from that area whenever you're driving it🤗💖love ya, be blessed and safe, there may be thunderstorms coming your way eventually, we here in Odessa TX and surrounding areas had just had a severe thunderstorm around 10:30-11:00 AM central time and now we'll be getting more this afternoon between 4-6:PM central time, warnings already for the west of us near the Southeast of New Mexico and West Texas around the Pecos and surrounding areas moving out direction

[@davidbrickey7328]

You’re moving forward on the bus👍

[@gloriako7185]

I think you need more supports all around, in the middle and all 4 four legs maybe should be connected to make more sturdy. I don't think it's safe as it is right now

[@sherryswafford4561]

I like your ideal of beefing up your supports by the wheel wells and I agree with the other people about adding us support in the middle so that it doesn't start to Sag in the middle area maybe put one front center and back that away it'll cover all three areas no sagging anywhere and make it even more sturdy but it's really looking good girl you're doing an awesome job I'm so proud of you

[@heidinewberry5621]

I hope it's not to high for your bun. Lol. I've enjoyed watching your build. Can't wait for future projects.

[@scottmiller5799]

you need a support in the middle on the center cross beam

[@forgottenblacksheep7780]

I’d add a support piece between the walls and the bed. I’d think that would make it more solid. You will have a great storage area. Looking good!!

[@usagirl4188]

Just another suggestion. With some small scrap prices of wood maybe you could cut a notch out like a c shape and attach to each side of the van wall, and stain them , then get you a copper pipe and some alligator clips and a painters drop cloth and make curtain panels to go in front behide your seat to pull to at night. I think that would be super cute and go well with the burant orange colors.

[@lrustr]

Hey just suggestion. Instead of the 2x4's framed flat you should have made the 4" width up and down instead. Look at the way a deck is built. Thats the way the 2x4's should be it gives you more strength that way. Just thought I would mention that. Looks good!!!!

[@skrtskit1521]

Looks good. As others have suggested, I think it needs a little more support. 💖🐱‍👤

[@allenpelletier6759]

DOING GR8T GIRL. can't wait to see it all done.

[@frankchris07]

The 2x4 on the outsides should have been turned the other way so your closer to your wall and the legs should double those up so you can attach them to the wall as well. Great job keep up the good work.

[@XPLRNW]

greetings from the Pacific Northwest! I love your content... I'm an outdoor KZbinr... Keep grinding on that bus! Your doing a great job!

[@jacobmoore921]

I think there should be some more support in the center of the frame. Even with the weight distribution of the mattress it will still sag and potentially break in the future

[@robertorodriguez5779]

I think you're doing an excellent job

[@vivianwilliams2216]

Great job Jaylena, you are to need much more support in the middle and all the outer edges, wishing you all the best! 😊👍💕💕💕

[@lewistelle]

I would lower the legs some just to get down away from the windows when you sleep. That’s just me.. I would feel more secure rolling over to see part wall and part window to peak over. I know you’ll have window coverings but just the sound bus sides during windy gusts or cold/ hot temperatures. And another beam down the middle for added support. Mama Telle❤️ Amazing work!!!! -mama Telle

[@JB-dz1zc]

Excited for your first night in the schoolie? Good for you!!! 🙌 👏 🎉

[@cynthiabarrow509]

You are getting there💕💕💕💕👏🏻👏🏻👏🏻👏🏻👍🏻

[@unencumberedchapter5407]

Looks great, you did an amazing job! Piece of advice, you should really add cross supports to the legs for stability. Will definitely help it from coming crashing down on you. 😉

[@kellypetsch6453]

The bus looks a lot more safe back door heavy duty plus side door built like fort know big latch I look for safety that's just me and I would have a big ass dog lol looking good

[@harrydavis4250]

The 2x4s going across should be turned upright to stop sag in the middle. To save taking it back apart you could just add one beside each cross member. If you don't do something it is going to sag badly in time. The time to fix it is now because bowed boards are very hard to straighten. You have learned a lot in a very short time. I have enjoyed watching you learn. Just always remember boards are always stronger when turned on edge. ( Rember that in all you build. ) looking forward to seeing what comes next. The bus is looking great.

[@desbuckle6907]

As Paul Honeyman said "The bed frame would be stronger if the rails were turned on their sides, as for sagging in the middle I assumed that your idea of an under bed closet and cupboard will do that supporting, and it's tying the bed frame into the floor and walls.

[@claramullen]

You might need center supports on the bed frame it will sag after time.