No video

Building the Associated B7 - and comparing it to the B6.3

  Рет қаралды 4,506

fiveeight0sixsix

fiveeight0sixsix

5 ай бұрын

Time to put the new Team Associated RC10B7 together - and to take a look at how much has changed since the RC10B6.3 and B6.4.

Пікірлер: 12
@accidentalme
@accidentalme 5 ай бұрын
Excellent video. Thank you for taking the time to make and upload
@chowettgoes
@chowettgoes 5 ай бұрын
Superb 👌 thanks for taking the time to do a detailed breakdown of the changes from previous generations of the AE 2WD. Your videos are some of the best around 👍
@piuspetschen1887
@piuspetschen1887 3 ай бұрын
Verry good and usefull vid. Thanks for this good work you, ve done. Have a 6.2 and i would soon buy the new 7 carpet version, but here in Switzerland is out of stock for more than 4 weeks.
@SkonkBot
@SkonkBot 5 ай бұрын
Seeing a lot of people posting about broken c mounts (pin pulling through the pill and the aluminium of the c mount where the slot/cutout is) after the types of collisions the say the B6.4 would usually survive; typically followed by replies from people denying its an issue, blaming the poster etc... But longer wishbones means longer levers; so its logical that in a collision, the longer levers will cause more force to be applied to the c mount. If the c mount hasn't been beefed up to account for the increased leverage then I think we'll likely see this proving to be an issue.
@fiveeight0sixsix
@fiveeight0sixsix 5 ай бұрын
I'll see how it goes. Gut feeling is that the extra arm length is not enough to make popping an arm out "easy", so more likely a combination of the parts on the B7. Note that the D block is not attached to the chassis so probably has more movement in it than before. Going back a few years, popping hingepins and arm mounts was an issue on the Tamiya Durga. Solution back then was some fine shims to take the excess play out of the hingepins, there is scope for more shimming on a B7 too.
@SkonkBot
@SkonkBot 5 ай бұрын
Yeh, may all prove to be nothing :) but pretty big redesign so could also need a revision or two to sort out any issues that crop up. The other thing I'm interested on keeping an eye on is whether with the narrower kick-up part of the chassis + the longer arms we see more incidents of that part of the chassis getting bent/twisted.
@jojoe469
@jojoe469 Ай бұрын
I just got bd7 dirt can't wait to see it drive team associated is good and best... peace Joe from Melbourne
@patrickkennedy2533
@patrickkennedy2533 5 ай бұрын
good stuf yallllllllll
@mattsoutherden
@mattsoutherden 5 ай бұрын
Has the XB2 gone? How would you compare the two? Did you put the Xray on the scales? I was drawn to the Xray as 'not another Associated', but this does look like a great kit.
@fiveeight0sixsix
@fiveeight0sixsix 5 ай бұрын
Yes the XB2 is gone. It's essentially a B6.4. It is light on the scales, partly that is because they don't include any electronics plates in the box, but lighter than the B7. Parts work out expensive on the XRAY and quality is not as good as the Associated (XRAY quality seems to be slipping). It really is hard to compare. The B7 is a totally new platform.
@andhib
@andhib 5 ай бұрын
Might be worth keeping the B6.3 for a wet astro car, with battery back...
@fiveeight0sixsix
@fiveeight0sixsix 5 ай бұрын
I wasn't running the battery back in the wet anyway. Will be getting a B7D as a wet car soon.
Team Associated B7 Electrics Install! Cutting ESC Wires..
17:18
Summer shower by Secret Vlog
00:17
Secret Vlog
Рет қаралды 12 МЛН
Mom's Unique Approach to Teaching Kids Hygiene #shorts
00:16
Fabiosa Stories
Рет қаралды 34 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 11 МЛН
Associated B7 - What To Expect From JConcepts
10:17
JConceptsLive
Рет қаралды 16 М.
The Changes I Made To Make My RC10B6.4 Much Faster
22:40
RCKicks
Рет қаралды 9 М.
How To : Set Droop, Camber, & Ride Height
12:20
Adrenaline RC Racing LLC & Hobby
Рет қаралды 2 М.
Team Associated RC10B7 Review | R1 3 Gear Build
20:28
Ryan Harris
Рет қаралды 24 М.
New Team Associated B7 Buggy vs B6.4 - Lets Compare!
16:55
SeanyRC
Рет қаралды 11 М.
It took me over 30yrs to do this with an RC Car!
11:52
Tomley RC
Рет қаралды 44 М.