This looks terrific! Great job! I too would be very interested in a video detailing how you did the bluing, polishing, etc. I've had the same kit for years but have been putting it off as I have no clue how to do that stuff. Would love to finally get it looking like this.
@DarthChrisDK7 жыл бұрын
Thank you, Stefan. I know it can be very intimidating, and I was in that exact same boat. I got a finished version as well, and this took off some of the pressure since no matter what, I'd still have that. :) I'll try to put together a video where I share my experience and share some tips and learnings.
@minikanin7 жыл бұрын
Nicely done and thanks for the video. I'm expecting my Tomen Blaster (2049) any day now. Would be nice to have this version as well....if it would still be available. Thx // Peter (Sweden)
@DarthChrisDK7 жыл бұрын
Thank you! The 2049 version is gorgeous. Different finish, but very clean looking. The new one also comes in a great art box.
@junior11383 жыл бұрын
Lovely video, thank you for sharing. How much of the build is actually metal?
@DarthChrisDK3 жыл бұрын
The amber grips, the battery chamber (the part with the switch under the barrel starting at the trigger guard). That's about it.
@junior11383 жыл бұрын
@@DarthChrisDK that’s a bit disappointing. Thanks for replying.
@DarthChrisDK3 жыл бұрын
@@junior1138 Oh, wait. Sorry. The parts I just mentioned above are the only parts in plastic.
@junior11383 жыл бұрын
@@DarthChrisDK ah. I did wonder when you mentioned the amber grips, but assumed you me as not the bit the attached to! Nice. Is this a Tomasuke kit? I may need to invest.
@DarthChrisDK3 жыл бұрын
@@junior1138 Yes, this is Tomenosuke. :) They usually have both DIY kits and pre-assembled/finished versions.
@bryanbeatty86003 жыл бұрын
Amazing
@DarthChrisDK3 жыл бұрын
Thank you!
@lucbegin73347 жыл бұрын
Wonderful! Getting my 2049 blaster soon but I doubt that I'll break it down to emulate this, lol.
@DarthChrisDK7 жыл бұрын
That's great. Very happy with my 2049 too. It's a beautiful piece. Congrats! You'll love it! :) I wouldn't change anything on it either.
@colinmayneart2 жыл бұрын
Hey CHris did you ever create the more in depth video? I have 2 issues with my build (or rebuild as I stripped mine down to weather and attach the metal barrel) My grip or handle is loose and I cant see a way to tighten it and I cant get the chamber spring back in there lol)
@DarthChrisDK2 жыл бұрын
Hi Colin. I only have the videos available that you'll find on my channel. Hmm, it's been so long now I don't remember in detail the handle and how it goes together - other than what can be glimpsed in this video. I really you sort it out! There's definitely a way to tighten it properly.
@DrPepperDERF3 жыл бұрын
How often does tomenosuke restock blasters on their website?
@squizzy61437 жыл бұрын
that is sweet bro... thanks for sharing
@DarthChrisDK7 жыл бұрын
My pleasure! Thank you! :)
@travismadore79247 жыл бұрын
Where does one order a beauty such as this?
@DarthChrisDK7 жыл бұрын
Hi Travis. This was ordered many years ago via the Japanese producer. I think I got this kit in 2013.
@DARKOO927 жыл бұрын
Can you explain the entire process to get this blued (sanded, polished and blued) like your Blade Runner Blaster please ? :) The result is magnificent !
@DarthChrisDK7 жыл бұрын
I will probably make a video on this later. I took some photos over the course of it all. Basically, - I used different grades of sanding pads from 3M (UltraFine, MicroFine) and polished with steel wool (0000). - Before bluing, I wiped the parts in acetone. - I blued using cotton pads and applied it directly to the surface in long dedicated swoops. - I used a clean cotton pad to wipe/rub the blued area immediately after. - The small parts I dipped in a 1:10 concentration of the bluing chemical. This way the liquid could reach the small details that couldn't be reached manually. I dipped them and counted to 5. Then took them out and rinsed them and rubbed them. - Whenever I felt that the corrosion was too dark or crusty, I would wipe gently the surfaces with clean steel wool (0000). To bring out the metal finish and make some patina on edges and details. - I then soaked all the blued parts in acid free oil (hobby oil etc.). I left them for a day or more (whilst waiting for supplies to arrive). - I then polished the receiver and bolt lever with Novus 2 (using a fine cloth) - an old T-shirt would do fine as well). - Finally, I used Renaissance Wax on the receiver and bolt lever to give them a protective coat. Again, using a fine cloth. I think that's basically it. As mentioned, will probably do a video later where I go over it again and show the various materials and tools that I used.
@DARKOO927 жыл бұрын
DarthChrisDK Thx for all those details ! A video would be perfect !
@DarthChrisDK7 жыл бұрын
My pleasure. Stay tuned.
@bedfordshiremodeller44912 жыл бұрын
@@DarthChrisDK Did you use any 3 in 1 Oil? As it's metal screwing into metal🤔🔩🔫🤷♂️
@DARHTMAU7 жыл бұрын
A very nice job. What did you use for the bluing on the metal parts?
@DarthChrisDK7 жыл бұрын
Thanks! I used Casey's Aluminium Black.
@DARHTMAU7 жыл бұрын
DarthChrisDK It looks fantastic! I’ll use that on mine as well.
@DarthChrisDK7 жыл бұрын
Have fun building. :)
@DARKOO927 жыл бұрын
DarthChrisDK Which one is the best ? Casey's perma blue or Casey's aluminium blue ? :)
@DarthChrisDK7 жыл бұрын
I have had difficulties finding good comparisons of the two. Most videos just show one of them. I believe that that expert that did the blaster for Tomenosuke used Aluminium Blue. I have an idea that Perma Blue gives a more black color with a blue hue/tint - more cool. Like pearly. Aluminium Black, from what I can tell, is a more black color with grey hue/tint - more warm. But I have not compared them directly. It's more an impression of mine.
@lopocappuccino6 жыл бұрын
Hello there, I'm getting the 2049 version off of HCG soon, should I leave it as is or should I "beat it up" a bit? Thanks! P.S this video you made is great. I doubt I'll get a chance to get my hands on the assembly kit but this makes a pretty nice tutorial for those who do have it :D
@Thekiwikollector3 жыл бұрын
Where on earth might i find one of these
@DarthChrisDK3 жыл бұрын
I believe that Hollywood Collectibles are still selling different versioins of this from time to time.
@brianknott99604 жыл бұрын
The original gun was built by my Father, Robbie Knott. He was never credited on the film for special effects.
@Howtodraw6 жыл бұрын
Great video, can't get this gun in Australia : (
@DarthChrisDK6 жыл бұрын
I'm sorry to hear that. :/
@bedfordshiremodeller44912 жыл бұрын
You can in the UK if you havva UKARA licence but their not easy to getta hold of/in most parts of America as well as they hav no gun laws over their
@CapitanTavish6 жыл бұрын
Which are the differences between pro version and non-pro version?
@DarthChrisDK6 жыл бұрын
The differences are largely minor. There are not evident changes. It's in the details. I believe there are lists either here in the comments, or on forums. I don't recall the differences off the top of my head, sorry!
@lopocappuccino6 жыл бұрын
what are the songs you used for the vid? I don't mean the Kevin Mcleod piece I mean the blade runner song
@DarthChrisDK6 жыл бұрын
It should be mentioned in the description. I used a track by Chris Zabriskie as well.
@lopocappuccino6 жыл бұрын
thanks man! now I can listen to that in my sleep
@DarthChrisDK6 жыл бұрын
Enjoy! :)
@lopocappuccino6 жыл бұрын
thanks, btw you're a frickin' professional at this. Love your high quality vids, keep up the amazing work
@jakobweber37546 жыл бұрын
Better than the version for sale!
@DarthChrisDK6 жыл бұрын
Yes, I also prefer the shiny look. The colors of the grips are better on the new ones though.
@sasiskiby7 жыл бұрын
Hello everyone! Welcome to this video 😃
@DarthChrisDK7 жыл бұрын
Very funny. :P
@nimbust83115 жыл бұрын
Is it a gun?or???
@DarthChrisDK5 жыл бұрын
It's a prop or model. Not a live-firing gun. Its construction has parts taken from the design of real firearms, but the materials used on this model are not compatible with a real gun.
@nimbust83115 жыл бұрын
@@DarthChrisDK thank u sir.
@bedfordshiremodeller44912 жыл бұрын
@@DarthChrisDK Their2FB groups whereby you can build Deckard's1:1scale blaster from the1st Blade Runner film all in metal. And K's Blaster from Blade Runner 2049+the oridginal design of Syd Mead's blaster which never got the Greenlight
@firespringtrap8834 жыл бұрын
I might have to break into were you like Jk it a joke Don't take it serious