Building the GREATEST DIY Tailgate Table! JL Wrangler

Well, I have always wanted a tailgate table and I honestly couldn't be happier with how this turned out! I saved significantly and I now have a crazy cool DIY Tailgate Table for the Jeep! Can't wait to get out there and give it a test!
Worlds Strongest Magnets:
amzn.to/3IvM233 (CA)
amzn.to/3K1t2d0 (US)
THE COMMITTED CREW:
www.TheCommitt...
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2

[@markc1793]

Looks great and well made, the only slight suggestion i'd do if i were building it would be to paint the underside/sides of it black so when it's closed it really blends in other than the board and maybe look into giving the top a "brushed" finish so that any scratches and marks it gets through use don't show up too much.

[@marcmontalvo787]

Same, i was expecting him to paint or stain the wood

[@NightWalkerasd]

Or maybe a sheet of abs plastic with a rough texture so it blend with the rest.

[@LOWLOWS18]

Even would be nice to put a piece of aluminum on the bottom side so when it's closed you don't see the wood

[@user-cu2ix2cs5b]

너도 멋지고

[@andrewk1831]

This has to honestly be the best built DIY table anyone has done. Its actually so sick!!! Will be using this for inspo on my JK

[@Jameshooperlikesrunning]

Another great video! You could use some sheet steel that sticks to the magnets as a temp heat shield/backsplash/splatter guard for cooking.

[@Mortemquiseram]

I found your channel back when you first started the wish part series with the civic. I've watched every video since then, truly enjoy your content. It informative, entertaining and exciting to see all your journeys with every vehicle you've purchased so far. Stay Committed! This was a super clean setup and dope build as well, loving the jeep so far.

[@JPtard26]

Honestly, wow. I’m super impressed with how clean you managed it. The magnets and parachord making it so easy and soft is such a great idea as well. 10/10

[@sbvlogs1050]

saw the instagram story and have been waiting for the video to drop ever since!

[@Fat2Fit5k]

I'm back lol so. Glad you started posting vids again we will always watch

[@rolandodelgado8784]

Glad your still around last time I heard from you was back when you finished the turbo EG Civic

[@thegiovannimauro]

This came out fricking awesome.

[@rivashanramduth]

That’s the coolest thing ever! 😂 I love how clean it came out 👌 you should put a black plastic sheet on the bottom so it blends in when it’s folded up

[@marcmontalvo787]

I gotta say, if you stick with the wood cutting board, you might consider staining it dark dark. That way its not like black jeep plastic, black paracord, black metal, and then light tan wood

[@MannsAdventures]

Awesome DiY upgrade. I need to do this to my JL.

[@danielblocker8008]

Really nice job on this! I could see a company getting on touch to get measurements to mass produce that design.

[@techfreak111]

jajajajajajaja

[@Honda_sev]

Unbelievably clean install man! Love the use of magnets. Loved the video!

[@hdwinter01]

That one upside down clip had me rolling ngl

[@rporter996]

Should totally wrap the top of that aluminum piece with some contact paper or something so it doesn't get all scratched up

[@johngrant1337]

Great tray and outstanding work Thanks

[@theshadowxgod160]

At the 24.00 mark. "$30 for the piece wood" While pointing at the sheet of metal 🤣🤣🤣

[@fuckngreat8955]

Great video, Would be nice to see ya change up the content from just jeep things.

[@santora06]

I thought I was the only one...

[@Itz_KDot8]

love when you make your own stuff! keep the vids coming bro! appreciate you!

[@garrettivins6277]

I have the rough country tailgate table and honestly the damn thing is super solid.

[@kennyaube2892]

Best tailgate table DIY i've seen, I did something similar today for my Bronco

[@Josh19998]

That’s so clean

[@P4SDetails]

Solid idea. The Wrangler is so versatile, but limited on storage compared to a few other vehicles.

[@merc_meat_62]

It’s always great to watch robbie’s videos during a midnight snack🍃😄

[@KhallStream]

Looks so good! Props. Definitely get a heat shield on that plastic cover for that door tho haha. Amazing job!

[@taemagniji]

nice video bud clean and simple

[@racingfortheson]

Such a great build that I subscribed to see more.

[@_Furbz]

you should invest in a leaf blower for winter/snow days - i did myself a couple of weeks back and its extremely easy and so much fun!

[@posd]

robbie, for the grill/stove and the plastic issue that you addressed at the end. you should get some heat resistant cloth that can just lay over the plastic part while you cook but then can be removed to clean and what not.

[@yirrrboii5318]

He uses an outside grill the lid is the splash guard

[@TylerL11]

Good job man great DIY.

[@Notguilty1]

Soooooo cooooool to see Robbie again!

[@jenna_tolls]

Im planning on buying a bronco, so almost every jeep video is inspiration for my future build

[@djloberg]

Started following just for the Jeep build so I don’t know your previous work, so I was very surprised at how nice and clean that turned out. Well done. Now as a former science teacher we need to talk about weight distribution….

[@RealMJSr]

Very nicely done

[@pedrocalzado9186]

so clean

[@VADERR7]

Awesome job. I like it.

[@alanhalbert2258]

Robbie I'm an eagle scout!! You gotta try a tautline hitch on it. It will work amazingly!

[@jdjerew7563]

damn brother, A+, I think I'll do the same build.

[@thelast929]

Great job!

[@michaelbeard5245]

Very nice craftsmanship and design!

[@oogaboogas001]

thats actually surprisingly clean!!

[@jordanhachey2864]

Bowline on either end would work great as a navy member I use the bowline for a ton of lifting and securing

[@happydays9613]

Absolutely love your tailgate table. Trying to create something that works in my car. Fab work, I would be super happy too if my own idea works.

[@seabees33]

really nice job

[@Bopperspaniel]

Dude you made that so clean!

[@devinhighbarger9314]

Crazy clean build.

[@jaydenschmidt1350]

Wow! Love this set up 🙌

[@Skizzlee]

Brooo, That is actually sick! Good job on the diy man I was just saying to my homie I’d love to do more fabrication stuff. Like you have an idea and you just have at it man I love it.

[@zzzz-ok7733]

Excellent 👌!

[@torontoraptors2107]

Diy tailgate table for jeep jl. Yes sirrr!! And thanks!!

[@willr69420]

*You ALWAYS do excellent work!*

[@heinebjrke8971]

Got the notification for this video while watching v1 civic videoa

[@cristorojas5157]

Bro, that looks amazing, really great figment

[@Phenotypek]

The way the song and die grinder sync up at 18:37 is crazy

[@aguywithajeep]

Looks great man. Well done.

[@nomadik3866]

You could add a MOLLE panel to the underside for storage as well... Nice build!

[@jon-jonmunro3956]

Surely we can get a ATV video some time soon!

[@Barajasjab90]

Badass job! i say for the cutting board, cut like a slot in the bottom of the C-channel and drill a screw through the slot into the cutting board.

[@KidWildboy]

Spray paint the bottom black so it all blends in. Other than that it’s awesome !!!

[@RustyFfs]

Another video! Where is the notification gang at?

[@voimamotorsports3538]

You should get a snowmobile and go one a trip with the Jeep and sled!

[@motyyam]

wow .. this is amazingly too clean for a DIY build. great job

[@Eightytwomedia]

That turned out great!

[@Fergie2014]

Hey man, love the channel! Just recently started watching, but i love the videos. First video i seen was the epoxy floors in the garage and just loved the set up. Would love to have something like it someday! Keep doin what your doing and #StayCommitted !

[@Frrarii]

This build was fire!🔥

[@dubssalamander]

Miss these DIY style videos!

[@escapeitall1391]

Lol I'd said "dudddeee" insync with you st 16:16 freaking tactical asf

[@joelbetancourt1337]

Super sick! The DIY tailgate table came out super clean, love the idea of building it then going off and buying $150+ accessory lol

[@damienalmeida5481]

I just bought an 04 liberty as my work “truck” because I don’t want to dirty my other car and seeing these videos makes me want to do something to it to make it less boring😂😂

[@realkuu_x]

yooo looks SICK

[@imhollywood5]

Love that he starts the jeep and then checks to make sure it's in neutral! 😂

[@jlrebor2626]

i mean its a start stop button, you have to put the cluch all the way down, the order doesnt matter in this case

[@janhbhugo5085]

Nice job

[@BeauTylerMakesMusic]

7:10 - When your wood wants to get up it’s the rubbers that always ruin it. Sorry. I’ll see myself out. Lol

[@dontclickonreadmoreitruine741]

I’m a really supportive person and I really like what ur doing, but this new content isn’t it, ur my fav yt, like u would be my make a wish choice, like if I was dying I would want to see you drift irl. I just miss the car stuff lol, u left us on so many cliffhangers with all the cars, I need closure for those haha, so finally my question is I enjoy the new style but can we have the old style back once a year at least, pretty please.

[@gingishwitch7279]

It’s mid winter

[@abhijotsingh4836]

@@gingishwitch7279 when he got the 300zx he said he was going to mod it during the winter. Started watching him when he bought the red civic. Miss the car content, but I’m still going to continue to support.

[@gingishwitch7279]

@@abhijotsingh4836 fair enough, I remember watching the oh civic videos

[@Jamal_sml]

loved this vid bro

[@landrysampson5923]

Sweeeeeet table, maybe this isn’t the style but I think some paracord weaves for the string support would be cool. Also maybe some spray paint on the bottom? Either way supper cool DIY table, see you next vid Robbie 🤙

[@kmyers7027]

Looking good man! I just went out and finally get myself a JK I had been wanting one for awhile so I sold one of my cars and put in some extra hours so I could get it! Can’t wait to start overlanding! Maybe some day I make my way north to Canada and we ride some trails together

[@tdoucette8281]

so cleaning looking you should start a company LOL

[@ThorSealtiel]

damnn! you prolly need to paint the metal table to make it look good, but all in all its a banger!

[@Zabber44]

I get this feeling that Robbie just wants to do a Van Life series.

[@BrokenV50]

Love the vids!

[@SwitchXD]

New Robbie video, let’s gooooo

[@steakeggnchips3082]

You need a gas strut to make the tailgate hold at a 90 degree angle. It will be a blessing when you camp on a decline/incline

[@neonboy26]

Dude, that is so cool. But as you said might melt the plastic, Im sure you can come up with something to make the whole thing slide forward more. A slider like keyboard trays on tables maybe. Idk. Im just talking outta my a@@. But im sure you’ll figure it out! Killer job man! 🖤

[@mikepierson3097]

Nice build!

[@BigBassBucket]

Here again!

[@MrSeshy]

What a great job and very well done too! Side Note: Have you ever thought about Anodizing your aluminum projects? If you Hard Anodized all that aluminum (Type III Class 2 - Black) - That would look even more amazing than it already does, offer some abrasion/scratch resistants' and really look great when tucked up.

[@920.streetstyle]

Amazing vid once again 🔥🔥

[@Prodigy_GP]

Would highly recommend cutting a hole in the cutting board or the metal holder! 1. Good for a little cup holder if you need it. 2. If you’re cutting and need to dump trash, you can put a trash bag under it and just slide the trash through it!

[@giwrgoslym313]

awesome 😎

[@gamecock2465]

That’s 🔥

[@Versatil07]

Sick!!

[@DUD3_BR0]

Use wire instead of Paracord. Paracord will stretch. You can pull the guts out of the paracord and sleeve the wire to cut down on noise. looks clean though.

[@FpsNubz]

Loving these videos 🔥🔥🔥

[@mammoth-puppy3246]

Keep another piece of flat steel like the table top, put it on the magnets when you’re bbq ing

[@ronswanson5551]

Love this mod!

[@dirtcheapmedia3390]

You could attach a single folding leg on the bottom of the wood cutting board

[@jasonhenry2212]

You should get a sheet of abs plastic. Make a bottom peace that covers the underneath of the table. So when it's closed it disappears.

[@416Expedition]

Hey Robbie, It might be a good idea to add some anti-seize in the hole on the tailgate where you drilled into. There is a lot of moisture and I wouldn't want to see that get all rusty. But as all ways, solid job and the jeep is looking fire!