Building the HUGE SUBS for the Jeep!!! 6 JVF Customz 3.3 12's

LIKE, SHARE, SUBSCRIBE!!!
Need a box design??? Email: [e-mail]
Follow my team! / teamnorcalspl
Follow me on Facebook / jeepandbass
Follow me on Instagram @2loud4_you
My Sponsors: DC Audio! www.dcsoundlab....
Full Throttle Batteries! www.fullriverba...
SMD (Steve Meade)! www.wccaraudio...
Sky High Car Audio! skyhighcaraudio...
JVF Customz! AKA Jeff Vue's Fault Customz

[@electronicshelpcare]

Wow, you are a great man. your video is so clean and clear.thanks for your video.

[@marko9657]

Got 160!!! Those are awesome looking showing those big motors 👊

[@bolivarbozo7554]

Sou fã dos americanos os cara tem a perfeição em tudo 🙏👏

[@eduardocervantes6488]

Wow it doesn't get any better than building your own subs and watching playing

[@docholidazeiii2606]

Except for the parts where he skips the good shit...

[@markandreicomahig7765]

Doc Holidaze rvnfnbbfbksffje

[@AjiAji-yp1hu]

Eduardo cervantes

[@caribbeancaraudio8940]

Beautiful build, can you post a link to where I can purchase those motors

[@garyofficer329]

They look huge. What's going to power them?

[@getfresh25]

Jeep and bass how did you determine your RMS and enclosure size for your built woofers

[@JoeJ-8282]

I've never actually *built* a speaker driver of any kind before, but that is freaking AWESOME that you can even do that! DAMN!... I wish I knew how and had the money, time and parts to do it too!... I am an audiophile myself, who designs and builds custom speakers, (mostly for home, but...), and sometimes trying to find pre-made drivers that fit the design specs that you would prefer is almost impossible, so being able to actually build the drivers yourself would be absolutely amazing and totally game changing!... I need more info on how to do this AND where you can buy the individual parts needed for it!... That's badass dude! BTW, what is that dark colored speaker glue that you're using there called and where can I buy it??... I've always seen that type on speakers/woofers/mids, etc. already installed, but I've never known what it's called or where to buy it... It seems to be really strong/tough, but yet just flexible enough to not crack under extreme cone movement. It would also be *very* nice to have some of that glue on hand for repairs of spiders and surrounds, or whatever else might need to be (re)glued on an older speaker driver, for example; one that needs some improving or repair!... Also, what is that aerosol spray stuff that you put on the glue afterwards? Is that to cure it faster or something? Where can you buy that and what is it called? One last technical question... Do those subs have vented poles? Because every speaker driver that I've ever heard that has major excursion like those ones do, seems to be very noisy, (wind noise, etc.), if the pole isn't vented... (and using a *flared* vent opening too!)... probably due to the air "swishing" around the voice coil gap and filtering through the spider... I like myself a CLEAN sounding woofer, not a "farty" sounding one!... Although when playing at such a high SPL as most competitions, the clarity of sound isn't necessarily the first consideration! LOL!

[@dennis-br6vr]

dont wish for it, work for it

[@zacharytersak1440]

Just curious if there is a good source online for someone wanting to build there own subs. Like a site that doesn't have a min order? Any recommendations are apreciated

[@electronicshelpcare]

Nice work

[@mostsell9877]

he should have sanded the basket, before applying it to the motor,so the motor shaft don't get metallic partickulets into the pathway!

[@Acoustic_Theory]

The frame and paint metallic flakes are made of aluminum, so they are non-magnetic and can be blown out with compressed air or vacuumed out. If he were machining the steel motor components that would be another matter.

[@filibertofonseca8083]

@@Acoustic_Theory or you can just use tape over the gap and pole.

[@clintmurphy5436]

Are those motors available for purchase?

[@georgecampos7119]

Were you got the motors from? They are beautiful subs man

[@edycalderon1282]

Very nice subwoofers👍

[@wmimang8311]

Sick

[@antwanhunter1325]

what motors and soft parts did you use

[@Alpacalover_123]

Please let me know how I gets hold of JEFF VUE..needed recone done Memphis mojo 15 inch woofer

[@topcitybasshead1030]

Very Nice 🙂

[@angngocson9471]

Can I ask a question? When the coil is long like that, how many in impedance? And what does the rope on the spider used for?

[@f.a3202]

there's actually 4 coils in 4 layers and they put 2 and 2 in parallel so the impedance could be anywhere from 2+2 to 0.5+0.5. Those ropes are actually wires (i think they're called tinsel leads) they connect the thin not flexible wire of the coil to the push terminals. They're used because of the flexibility they have.

[@electronicshelpcare]

great video

[@rowlandmitchell7949]

hew where did you get those motors from well really everything you used to build it

[@Exodia]

Motors are from China and the soft parts are 3.3. 3.2 cost 450 each so they are super high end

[@COMPASBASSCHICALI]

Hey Ray dont you think is better not to paint the basket area where you will glue the spider❔❓

[@JeepAndBass]

+COMPASBASSCLUB CHICALI powder coating makes it harder, its fine to paint the whole thing as long as you scuff up the spider landings. Ca glue is some powerful stuff when out down lol

[@COMPASBASSCHICALI]

JeepAndBass You are the boss sir lol👍✌👊

[@louiemares1610]

@@JeepAndBass why didn't you just tape up the landing much easier and cleaner

[@davidunger9334]

Soo...u basically built X-12's with nightshade motors..? How many steel shavings did u get into the coil gap ? Lol. Nice build.

[@tatert.v.9908]

Looks great dude your vision came to life and we hope your happy with it!! Im gonn make a prediction and say metered its going to do a 159.8!!!Just kidding lol. Anyone say got 160????

[@JeepAndBass]

+Tater T.V. Haha thanks man. So far it's sounding decent but needs adjustments and more power. Very loud windows down but it doesn't like being sealed up sadly

[@Alpacalover_123]

I needed recone done ..how do I get hold of you guy's!??

[@ls87gbody]

Tell me more about those motors please. And where did you buy them. Sweet build man.

[@ginoavila2085]

Yea tell us?

[@michaelsegarra2709]

dam man they look mean I cant wait to see them playing man! grate job greetings from Puerto Rico ! :)

[@SanjeetKumar-ji1th]

Sanjitkumar

[@rickc137sanchez3]

Love how they turned out bro. What power are you planning to run to those bad boys?

[@JeepAndBass]

+Oliver Valdez starting with a single DC 10k and eventually get another

[@rickc137sanchez3]

JeepAndBass Nice Ill be following this beast of a build. I also plan to run 6 12s in a 6th wall next year if I can find 2 more fi team v1s by then lol

[@JeepAndBass]

+Oliver Valdez awesome! Thanks for checking it out :)

[@DeadlyVoltsHD]

I wasnt gonna paint my basket but god dam thats a sexy basket

[@spuds7677]

Can you tell us where you got those motors from? Those look pretty beefy

[@jordanmarker1220]

jeff vue sacramento california i believe you would contact arden audio. if not hes on facebook.

[@1loudfortysix]

Is the red spider better for xmax? Seen that on Sundown Nightshades too. How many spiders in total? Looking to recone my subs too :)

[@joes7373]

I have a tantric hdd 12 that looks jus like those but red basket.

[@UsedCarAudio]

Great video

[@AmitKumar-is3pb]

Hello

[@AmitKumar-is3pb]

Hello

[@user-gu6pu8mk9m]

very nice and powerful...so how much ??.....

[@robsorgdrager8477]

Wooooow listen to that basket ring!!!! That's why I love my dark audios , steel basket sounds like a hammer hitting sod when you knuckle rapp on er.

[@JeepAndBass]

Dark audio? Never heard of it.

[@robsorgdrager8477]

JeepAndBass search it on the interwebs . small company out of Madison Wisconsin. Granted the subs are made in China, but the entry level sub uses triple magnets , double spiders , three inch voice coil and a very solid steel basket ....100.00 bucks. Plus evey thing is nut and bolted together so rebuilding is simple .

[@Jebatderhaka]

wahhhh😘😘😘 nice work bro

[@manuelmendoza4652]

What is the name of the glue used for the construction of the subwofer or as requested or where do you buy it?

[@skmax521]

Where do you buy these parts? Thank you

[@workingclassperson2124]

I’m luck enough to have a sub builder I have 2 custom hcca’s 15’s and I tell you what there are SOOO ! Nice. Building subs looks easy but so does flying a helicopter ;) but I want to learn.

[@zacharytersak1440]

Good shit man!

[@stevinvillalobossalazar6212]

bro greetings from costa rica, a question that measure of coil is that and what number of awg cable you use and how many ohm

[@BARBELLS-AND-BUDS]

Are you gonna compete with this setup over the coming weekend? Those subs and the whole build look awesome dude!

[@JeepAndBass]

+bassmansoundking99 don't think it's ready. Might show up and demo

[@BARBELLS-AND-BUDS]

Demos are the fun part

[@getfresh25]

What kind of motor is that like what brand or just a Chinese motor

[@codythomas1768]

I'm building my own subwoofer with a skar TXL motor and a TI style basket. This is my first time building my own sub and I was wanting to know how to determine what coil I need and where to place the spider to the coil to make sure it doesn't bottom out. I hope that makes sense please help

[@codythomas1768]

Also can you choose any cone you want? If not what specifications do you have to follow to find which one will work best?

[@JeepAndBass]

Choosing parts is mainly based on what your going for, spl sub, demo sub, lows. I am no expert on all that. Jeff helped me out on most of it. Some good places to talk to would be PSI audio. They can help get you the parts and specs you need for your application.

[@JROCBABY16]

How much would you charge to build 3 12s or 2 15s ?

[@seanaquino4862]

Wow ang Ganda naman amaze grave quality

[@phucquang2428]

Đẹp quá, ước gì mình có được 1 cái loa như này nhỉ😍

[@jerryfang5488]

Keep it Ray

[@frankrivera5916]

Holy shiznit thos badass mother fucking bombs are gonna blow ur damn doors off not to mention u made that shiznit look eazy

[@saschafischer7400]

Are you guys still around

[@homixide187]

Are these guys still open? If so how do we contact them or buy a set of 12s

[@rodrigoemarygurgel351]

hello friend, can you tell me where I can buy only the suspension with the cone? I live in Brazil and want to know if I can buy on ebay? grateful for the attention and hope you can help me!

[@bigchief1658]

Are these 4 inch coils

[@209smokeboxfttheflooringgu4]

Where can I find that motor at?

[@marvinavalos6384]

How long did it take you to do one subb???

[@brian69frmovale76]

Nice

[@christophermanabat1934]

How many Oz are the motors? I wanna say 400oz motors but can’t tell haha

[@THESUBZILLA]

where can you get the parts, or how much were they from jvf customz?

[@alexferguson8893]

Where did he buy the motors? Can I get a link?

[@danphillips4934]

Looks great! I know now if i feel any earthquakes where they are coming from👍🏻

[@JeepAndBass]

+Dan Phillips hahaha

[@danphillips4934]

JeepAndBass are you going to be in the SF bay area with the Jeep? Never seen this kind of system before in person.

[@JeepAndBass]

+Dan Phillips I don't like going out to the Bay Area with it. But I'm always in Sacramento with it. You can come check out a show sometime.

[@danphillips4934]

JeepAndBass that sounds good too. Is there a website i could check out to see when the Jeep will be around? Thanks and keep up the good work!

[@JeepAndBass]

+Dan Phillips search for termpro.com on there go to the dbdrag link and look for event calendar. There will show lists of all the db drag events. You'll find many in cali coming up.

[@ENDLESS85]

Them blue baskets tho

[@christophermanabat1934]

Is that a 4 or 8 layer coil? Why only one spider? I built some 400oz motors and had to rebuild it three months later cuz 1 spider wasn’t enough it needed more dampening. I was using linear spiders tho, I noticed your using progressive. Does it make that much of a difference?

[@JeepAndBass]

8 layer, 3 spiders stacked. I like progressive because I think its a smoother sound. Just my taste

[@christophermanabat1934]

JeepAndBass ahh ic, I used a half inch spacer. I’m starting to think it was a mistake to space them. I feel like the spider on the opposite side of the flex hit its Xmax before the other side does, losing 10-15mm of possible xmax. I use 400oz motors with a 15” TI basket with 10” double spiders with a half in spacer between the spiders on an 8 layer coil.

[@adrinwoods4567]

Nice job to fix it that subs.👍🎶🎵

[@osaka_87]

Is what grow spray?

[@generalkickass6385]

That's one beefy 12 bro

[@JeepAndBass]

Yes sir!

[@sandudj9649]

What you using glue..??

[@hiteshdhaigude]

Where do you by ti basket from

[@wtzszombiesprod.3666]

Hey man where could I snag that cone and surround from?

[@THESUBZILLA]

how large are the ports?

[@toanphatnhaat4275]

Có bán bas ko bạn ơi mình ở việt nam

[@euphorikfay]

gj man looking good

[@sayianofallsayins192]

Damn badass👍👍

[@octymocty132]

Can you help I have an old pioneer spl 12 which I need a recone as coil gone but no one in uk will help I dont wanna throw away as it's a 3000 w monster and I've seen one go for £ 500 pound

[@aaron5047]

That's crazy. I just got 4 almost brand new for $200. Was surprised of how excellent condition they were in. DVC 2 ohms they just dont seem to have much excursion even ran at 1ohm 1k rms watts. Magnets without the back case seem a little small for 3k peak

[@aaron5047]

Could ship a drop in cone for you

[@JaMarvelousjmar]

What size ports are those

[@evolm.c.f]

Oh lawrd . I just want 1. What is price to make one ?

[@JeepAndBass]

+EVOL believe it's $475

[@KINGSPL]

Nice build and baskets butttt....Ummm anyone else notice no locktite or even a tack of C/A glue on the basket screws= asking for failure What ya using for activation spray thanks

[@KINGSPL]

Also what ya using for a shim? And where did ya get that poly plastic ring to clamp down on the spider even

[@JeepAndBass]

I don’t lock the baskets to the motors for a reason.

[@souhailla10]

nice that we couldnt hear the sound .. good job !

[@lkjyuiop1987]

If he can buy them parts from China so can you. 💪🏻

[@jeffmjhld]

Eu queria dois desse alto falante pra colocar no meu Gol Quadrado 😢❤

[@amzadshah8847]

What is the price this subwoofer please replay

[@creativevideos2586]

What is price of this speaker

[@curtiswilliams4395]

I got 2 skar audio ma 8s I can't find no one to reconnect them.. I wanted to know if you could recone them for me and I will pay you for them

[@s.anandkumar1827]

Price please

[@Dally_Sparkles]

what the advantage of building your own?... where can we get kits from? this is amazing.

[@JeepAndBass]

Main advantage is a greater understanding in your equipment. These are not really kits but a selection of parts paired with Jeff's motor design. They are available if you really wanted the subs but are pretty in limited stock just because its not a large sub company at this point.

[@MayhemXo]

Lord of bass sells all the parts needed to build subs might be doing an 18 with a 160oz mag dual 2 ohm 3 inch vc totals out to around 400 bucks to build just one tho also just depends on what parts are bought etc

[@Strobe_rockets_]

@@MayhemXo howmany ounces do u think is his motors

[@MayhemXo]

@@Strobe_rockets_ those are probably 400oz motors if I had to guess or around there between 300 and 400oz for sure

[@Strobe_rockets_]

@@MayhemXo how tall is the voice coil

[@sandeeprajraj2386]

Bhai prices kya hai in speakers ka

[@bigchannal5814]

How must

[@victormaldonadocordova6191]

amigo como puedo manejar tus productos

[@romansaucedo9786]

Muy buenos materiales de alta calidad pero te faltó detalle en tu armado hay varios errores dónde se ve mal la aplicación del pegamento.pero esta pasable tu trabajo

[@surahmanmatasir3718]

Wowww

[@deathwing6575]

Someone died watching this video lol

[@nhutranthao]

Ước gì có một cặp 😍😍

[@user-og7fx3hw5m]

Hi

[@Prabhatkumar-qd4oq]

What prise bhai

[@COMPASBASSCHICALI]

👍

[@supersilve]

Are your ear drums still in place? :)

[@jjmccloud]

So how much did u end up having in each sub after building ur own

[@JeepAndBass]

Sponsored

[@jjmccloud]

JeepAndBass Right on

[@nischalthapa5528]

That will twerk Hard 🔥

[@nelloreraider]

How much sir

[@reaksasor7176]

how much bro..?

[@valdeioconceicaopety7118]

Quero 2 desse para mim colocar na minha sala