BUILDING THE ULTIMATE GARAGE PRESSURE WASHER DETAILING WALL!

PLEASE SUBSCRIBE AND CHECK OUT👇🏽👇🏽👇🏽
WORKFORIT APPAREL: www.workforitap...
100' HOSE REEL:
amzn.to/2ZsYiLI
PRESSURE WASHER:
www.pressurewa...
JUMPER HOSE:
amzn.to/2ICeVPI
50' 3/8 HOSE:
amzn.to/2Drb0kC
GET MY SUNGLASSES HERE: amzn.to/2SnnS0s
VLOG CAMERA: amzn.to/2CZfPll
GOPRO HERO 7: amzn.to/2VCZaLO
BULLET ANTENNA: amzn.to/2SK1Oxt
5" EXHAUST: amzn.to/2SLBR0u
MICROPHONE: amzn.to/2VFYtB7
JOYING HEADUNIT: amzn.to/2s8WmbD
CONTACT INFO:
Instagram:
www.instagram....
Email:
[e-mail]

[@DMAXRYNO]

WORKFORIT Keytags are back in stock! www.workforitapparel.com

[@aaronlangdon3604]

So basically this is the cheaper ripped off version of what Matt from Obsessed garage did you could’ve at least gave him some credit for his work honestly Matt did it better

[@jleach6804]

@DMAXRYNO Have you ever thought of selling a workforit flag?

[@ranchtaco1649]

Aaron Langdon WORKFORIT is different and his way of contributing to people like himself and you shouldn’t hate on him. He’s made his brand and you can make yours.

[@aaronlangdon3604]

Ranchtaco 16 well if you would’ve read both of my comments you would’ve no I wasn’t trying to hate on him and I am making my own dreams I just bought myself a house in cash that I am flipping for a huge profit I just thought He could give Matt a shout out even if people don’t buy his pressure washer they can buy other products from him helping his business out which I am sure Workforit apparel Would appreciate as a business because he would want someone to do the same

[@andrewyaadigg]

Damn some people get way to serious lol😂 but Yee check out obsessed garage he has all the right fittings and connections and blue hoses idk if he has 4 foot hoses he might fer sure 6 foot tho.

[@molhuwmartins9723]

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

[@joshr2280]

Obsessed Garage for your hose. He has all the cool stuff, and watch his videos if you want to take detailing to the next level

[@Saetun.]

I loved Christopher when he was on Storage Wars.

[@AndrewSmith-rf6gs]

Cox hose reels are worth the money. I have one with my pressure washer setup

[@bradtaft8120]

Future reference the Krenzle 1322ts is the best for detailing puts out 2.3gpm whilst keeping 1100 psi best u can get and its pretty much the same price as that AR blue

[@DMAXRYNO]

Brad Taft that model is $200 more and doesn’t shut off when the trigger is released. To me the AR blue is superior with that feature.

[@Matt_Money777]

The ar630 provides higher output than the kranzle and is cheaper. It’s a no brainer

[@jaybirdls1]

@dmaxryno you’re totally right! If you can make boring chores easier to do then they almost do themselves!! Well, not in that way... Good work tho, looking forward to see how your car wash station works out 👍🏻

[@Ramcat_Vlogs]

Do 4’ branded washing machine hoses I’m sure you can get them in black or silver

[@highaltitudetrucks]

This is awesome Ryan I'm literally going to build one now!

[@bsanders9106]

3:09 The BOAH challenge. Arthur Morgan from Read Dead Redemption 2 approves lol. "Where's my pressure washer, BOAH?!"

[@thedrail20]

Nice job fellas! When do we get to see Tahoe project?

[@gearlstrickland3365]

What size sheft do you have the pressure washer sitting on?

[@jacobroyster1791]

Could you do a review on Chris’s work truck?

[@el__2handed]

How tall was the plywood cut to? You mentioned the width was 2 feet.

[@tigre6473]

Hes really flexing on us with the amount of vacuums he has in his house

[@Ramcat_Vlogs]

Should of done lips on the shelves an rubber feet under the pressure washer feet or spring feet

[@joshua6200]

I saw that crooked line, with my naked crooked eye!! :)

[@brian21m33]

That moustache.

[@OnEst_Opinion]

@ 17:36 “But anyways, we’ll worry about that later” ahh the oh so famous words of a contractor. Sell a job? Don’t worry about that one thing...we’ll worry about that later. Something leaking in the house? Ahh don’t worry bout that, we’ll worry bout that later. It’s good for now I assure you. Same reason you don’t buy cars from car mechanics. Trust me when I say I get it because I’ve done all this basic plumbing and a lot more Ryan does, life’s a project but those oh so famous words..

[@canamcrazyman9301]

Why don’t you just go to any auto store and get clear hose then make it any length you want then just add the adapters to it and boom cool looking hose

[@duramaxklem1491]

Better use a shut off valve. Wait till something smashes your pipe laying on the ground YIKES!!!

[@dustinwheeler4468]

Sweetaaaa

[@blue.collar.man.]

Who thinks DMAXRYNO should slap those wheels and tires on the OBS just for shits and giggles?

[@DMAXRYNO]

Big announcement for the 7.3 coming this week!

[@08gravedigger]

Check out Obsessed Garage.

[@maxracingteam23]

I would turn the water supply off every time you are done washing. The valve before your tanks. Never know something could happen when you aren't there.

[@DMAXRYNO]

maxracingteam23 definitely! I don’t trust plumbing haha.

[@maxracingteam23]

DMAXRYNO 👍👍

[@paintgunexpress1949]

Good Good Video...#1 Channel..... SMASH THAT THUMBS UP 👍👍👍👍👍

[@chasetiemeyer1056]

Obsessedgarage.com will be your friend for the proper parts.

[@belaidout]

361 liker ( i like all the videos ) you guys put out.

[@cartmanbrah8937]

In what form of payment will I receive my $10 is it tax-free ?.better yet I'll just pick it up in San Diego it's a short drive for me. Haha

[@garbagebmx5224]

Ayy thats a Libman mop.. i work there pick orders and load

[@jamesnelson4740]

Wheres my 10 $

[@Pghsfinest222]

Go to obsessedgarage.com he has a ton of detailing products for your pressure washer including some nice jumper hoses

[@pinarellorider9023]

joseph chop YES! His garage is sick!

[@nathane2243]

way overpriced

[@clapzy2943]

@@nathane2243 you can look at his vids for ideas tho

[@JoeJoe-xl4ef]

can just go to mtm hydro and get whatever size jumper hose you need

[@HawaiiDetailing]

Great vid as always. I did a similar install on my channel. Stoked to see videos of cool garage setups.

[@NotMyGuns]

Please be sure to record when a leak from the high pressure hose sprays all over that electrical panel 12 inches away. And then the reaction when you find out the insurance company isn’t covering that claim because it wasn’t built to code. Should make for plenty of “likes!” Placing rubber spacers between the wall and plywood AND under the pump will help reduce noise vibration. Good tip with the rubber paint. Great job on the build.

[@joshr2280]

Obsessed Garage for ypur fitting s too

[@theronleany48]

Use a steel braided washer hose instead of the green ones

[@yz450fyamaha1]

Was going to comment same thing, the ones for washing machines

[@alexbillian2846]

Glad someone isnt on the Kranzle band wagon, 630tss is a bargain and a superior product, more PSI same GPM

[@jwill9877]

It puts out a little more gpm than the kranzle

[@WJCTechyman]

PVC? I would run copper. Then again, I am a guy with high standards. Also, your patch hose from that outlet to the pump inlet can be done with black rubber hose that you can probably buy in bulk at a hardware store and install either crimp brass or just some standard ends and making one of those ends a 90 degree going into the pump. The same could be said for the outlet, a 90 degree fitting, if it works going down to the hose reel.

[@tobybushong7392]

It’s already been mentioned but at the caliber you do things, or seem to want to do things, I think you and the rest of your viewers could really benefit by using products and systems from @obsessedgarage .. I’m actually surprised and slightly disappointed that it was done this way.

[@DMAXRYNO]

Just browsed his website, not trying too cut into his business, but most things are grossly overpriced and out of touch with what most people are willing to spend on a pressure washer setup they may use a couple times a month. I was already uneasy about spending as much as I did on the pressure washer. If I had built this in my garage, the level of show would be stepped up. I'm not going to spend the extra money to make it that flashy in a building I don't own and may not be in for long.

[@tobybushong7392]

@dmaxryno that’s understandable, respectable and makes sense.. keep doing you, your setting a great example for many.

[@Matt_Money777]

Hard to do business with someone who lies about being ocd and acts like he is someone that he’s not.

[@NewShockerGuy]

I JUST picked up this pressure washer! Waiting on my cox hose reel as it's backordered with the mount, but I really liked that you showed how to make the entire shelf unit. This is perfect and I think a MUCH better solution than spending $120 on a s/s metal shelf that the pressure washer sits on. One thing that people do NOT mention is that since you used wood it will actually dampen the noise of the pressure washer compared to a metal shelf which would amplify it!. Can't wait to use my 630 TSS this weekend for the first time.

[@dropletz.]

Use stanless steel washer mashine hoses

[@jakp8777]

Cooper good idea

[@AntLive29]

that is a great build. 'im gonna extract some ideas from your video and construct my own

[@chastblind7606]

13:15 Lmao! Chris just being lazy!

[@stevesls007]

Very nice setup... HUGE garage! How do you plan to deal with the water evacuation in the garage? I don't have any drains in my garage so I wash my vehicle in the driveway.

[@Gigantortacoma4x4]

One small note on this particular model if you walk away for more than 5 minutes you need to turn the unit off to avoid overheating. I'm surprised the warranty is only for one year, hope you have good luck with it.👍

[@gunneroffroad9850]

I just set up my pressure washer to. Like seriously just looked at my phone n got the notification.

[@calvinh.8882]

If anyone is going to buy water hoses, do yourself a favor and buy Craftsman Garden hoses. you can get them at ACE Hardware, or order them off the internet. They have a lifetime warranty, and you can leave them on 24/7 in the sun and even run over them and they will not swell or bust. Bottom line is they're awesome!

[@ThaProfeshional]

15:22 super good advice, Ryno kind of blew through it though.

[@jeffcourtney8101]

You'll like using hot/ warm water to wash with. Warm water cleans better.

[@DaiLoo888]

Im abit pesimistic when you are using wood, because like you said the hose is a bit leak, it will crush the wood in some way, better u use stainless steel plate, i lt is safer...

[@mos25328]

I love that setup wouldn’t mind having that at my home honestly would be amazing

[@319speed]

My cheap harbor freight electric power washer also shuts off when you let off the trigger....

[@agger838]

😁😁

[@austingriffin1510]

Plz get a OBS chevy or GMC for a little project daily

[@ZOOMSOCAL]

Hit up Jerry Mcmillen for anything pressure washing. He is in your area. His site is pressurewasher.net

[@jwill9877]

I mounted mine using a french cleat system. Made it very easy to get it up level and not struggle with it.

[@rsdna9698]

Washing Machine Hoses, you can get them in black or stainless.

[@peepsprojects4798]

That will make it easier to detail. Keep'em shining.

[@vectorr6651]

I wish you could find a cod real for 120 dollars now haha.

[@mateovargas6504]

We are just going to ignore the fact that Ryan had a child’s helmet at his house? With no known children?? I think an explanation needs to happen there, bud.

[@mateovargas6504]

I’m not asking the guy for his social security number 😂 I’m hoping for a hilarious story behind why he bought a kids helmet

[@jerrybrandt9377]

Arms should never be larger than legs . Legs like sticks there killer

[@ulyssesmendoza989]

Found the AR 630 at a lower price on Amazon. Just not the hot water one. Scroll tru the models and you will find the one for $594 . Thank you for the great ideas, need to find a good set up to wash down my work truck Ford F-550 and the Family vehicle’s.

[@sabbdabbydoo5728]

That plywood is like 100$ a sheet now lol

[@ailen789]

you should see if you can get some AN fittings and some steel braided hoses that would look SUPER cool but maybe to much $$ for what you willing to spend. just an idea though

[@jakp8777]

$700 isn’t bad for that pressure washer with its brass pump, heater and AR is a good brand. It’s not Cat, but if you got a cat pump it would be more for just the pump.

[@Gigantortacoma4x4]

My pressure washer has the exact same wand and I purchased a threaded quick connect fitting that attaches to my foam cannon so you don't need to purchase a different wand.

[@americanpatriot8786]

Use steel braided washing machine hose. Comes in various sizes and is more durable in the event of hose failure. Less likely to flood you out. P.S. I’ll take a WFI hat instead of my $10 bux.

[@mittytruck]

Easy shut off valve upgrade, take a male PVC adapter to a female brass shutoff valve back to a male PVC adapter, continue your line

[@zachmckenzie1424]

Hey RYNO, any chance we can get a red white and blue small decal like the one work for it hat? Would love to get a few and support

[@zackgutierrez1]

I go to a local hose shop that will build nice goodyear water hoses at any lenght. Its H and S hose up here in Bakersfield but I am sure there is a place down there.

[@jcooter619]

Why the sunglasses inside home depot and the warehouse Chris??? Have you been hanging out with Dave? Redeye

[@jakp8777]

Home Depot only has crap for pressure washers. Almost all of them are Ryobi none have Briggs and Stratton Motors and the accessories are mostly store brand.

[@cameronbachman4424]

Warm weather is back business is rolling. Almost ready to spend some money on your tanks and t shirts for summer work shirts. Wish you sold cargo pants/shorts

[@matthewprince506]

If you take the feet off the pressure washer you can bolt the pressure washer to the shelf so when your playing basket ball the ball doesent knock it off I know it’s heavy but all it takes is that right angle and better safe then sorry

[@H4roBMX21]

If you want a shut off valve on the pvc use a true union ball valve. Use them all the time at work. Really the only time i have one leak on me is if the oring wasnt seated properly, plus if it does leak you just unscrew it and put a new one in

[@derangd3339]

I can send you some vibration pads if you want to put under your washer to help with some noise. Let me know.

[@makuta373]

definently would make a miny boundry wall/stopper on the shelf the washer is on so it doesnt dance its self off of the shelf while outside an using it

[@Carl_Jr]

You could use braided hose wrap to cover the green hoses. Basically the same stuff you'd use to cover hoses under the hood of your truck.

[@11TGUN]

You could always add some fairly heavy duty (short) springs with thick washers on both sides, under the pressure washer to absorb some of the vibration you will get if it's directly mounted. Pads will work too probably but might not work for long if you use it too frequently. I'd definitely try and go with SS braided hose as well. This setup is going to be sick. Great job.

[@jacoblewis2863]

Please make more content like this. It’s awesome to show your skills in craftsman ship. Although I do like videos on the truck these videos top it

[@elevatedboost7444]

Are you still using this unit if so how are you liking it any issues ?

[@DMAXRYNO]

Still use it at least once a week. Thousands of washes and it hasn’t given me 1 issue.

[@user-jh8cx4jf7u]

Hydraulic hose and fitting shops also carry those type hoses. You can have them made to length needed also they can replace the ends on the hoses.

[@lilgater1234]

Hey Rino house your day? Love your content lately keep it up!

[@blaisesarate6729]

david The awesome Why would he want to house his day?

[@jamesdworak9302]

Saw you looking at a truck from lime ridge. I've heard nothing but good things from that place! I can't wait to see the future cateye

[@nelson9136]

I was the first likeeeee and awesome scooter😂😂

[@ryancohick1313]

Should put 2 tap cons right above the pump it self so over time the pump self don’t pull and bend

[@GoodOlBoy1976]

I will take a key tag or a hat for my $10.00 LOL.

[@paintgunexpress1949]

Same here... Please and thanks

[@baylorbohr9118]

I’ll take the key tag lol.

[@bsmithshoes9120]

My ar blue clean is electric and stops making noise as soon as I stop pressing the button and it is not warm water

[@iowamatt2519]

Is that a Hart WOODY framing hammer? I thought I was the only guy with one still

[@dakotasoutdooranddieseladv936]

I’m still hearing Chris’s whistle due to the price tag on the pressure washer. Haha.

[@ItsMeSpiritual]

Should've checked out Obsessed garage before buying but whatever , it's a fun project to do your self none the less

[@nathane2243]

he's overpriced

[@Matt_Money777]

Why go through a middleman? Better to buy from the source

[@beastutv9758]

Thank you for inspiring me to get off my butt and do something that matters in my city. Love everything you're about and the message you convey. Hope to see you chris and Dave up at FLOGFEST this August! Keep it up brother!

[@MercedesMechanic]

How much PSI would you recommend for an electric pressure washer for cleaning my aluminum wheels on a mercedes s550? I see some say online that you can harm the car if the pressure is too high.

[@vincealince_SRT]

Sure, but it’d be real hard to get that kind of pressure from an electric unit. Anything under or around 2000 psi is just fine. But you do want high GPM for washing purposes. If you haven’t pulled the trigger yet, hope this helps

[@cameronbachman4424]

Oh dang almost missed the Martinez hammer. This man knows quality, very appreciable

[@brianszmitko]

The hose reel, is that connection point fixed or does it rotate once you have a hose connected to it? When you were turning the system, it looks like it continues to spin with the handle. Looks like that will be an issue if that's true....

[@DMAXRYNO]

TheScatManMan it’s just stiff and had no resistance on it. The drum spins independently from the connection.

[@asarendars]

Thats an expensive hammer

[@matthewprince506]

We use redheads on foundations on our toe then the rest anchor bolts most of the time around doors are lintels or finished basements

[@ntaylor0214]

Dude I have grey medical grade hose ! For your application

[@darrenzemanek3881]

Have you thought of a system like CR for DI water?

[@johnnygreen730]

Obsessed garage is the place to get detailing products and pressure washer materials

[@nolugs3376]

I LOVE WORK FOR IT!