Building timelapse | Yamaha XV1700 Warrior Custom

[@spvimagery3527]

Nice build bro. Did you use the stock swing arm with stock wheels just bigger tires?

[@ZeeZeeCustoms]

Its the stock swing (just cut out 20mm on each side) and the rim was changed from 6,0x17 to 8,5x18" with the tire change from 200mm to 240mm 😄

[@spvimagery3527]

@@ZeeZeeCustoms thanks for the info. I’m planning to do it on mines.

[@dreb8man]

Nice bike. What can you tell me about modifying the swingarm? I recently bought a 280mm (rim and tire) and want install it myself. If you could, provide with me some insight on how to get it done. Thanking you in advance.

[@ZeeZeeCustoms]

280mm.... thats huge 😄 I dont think it will fit on the stock swing cause u have to cut out too much. I think a "big ass"- kit would be the solution.

[@dreb8man]

@@ZeeZeeCustoms thanks. I appreciate your time. Sandron (has KZbin channel) put one on a stock swingarm.

[@ValanPrimus]

awesome build, question where did you get your rear fender?

[@ZeeZeeCustoms]

Thanks buddy :) it's the OEM fender - just "chopped" by the half and fitted. The previous owner tried to make the fender looking more aggressive and I just finished his messed up work. ;)

[@rodrigoortega6605]

Bike looks great. My question is, where did you get the intake conversion kit from?

[@ZeeZeeCustoms]

@@rodrigoortega6605 Thanks buddy :D When you want to go with "plug & play" sets you can buy the kit from "Baron" or from "Patric racing". With some small handwork you can build an bak or vbak by yourselfe (like mine) 2 Air filters (like K&N rc1060) 48mm silicone hose + clamps A 180° pipe 48mm outer 45mm insid diameter (to cut in 2 90° pieces) Silicone hose (for temp sensors, I took 5mm inner diameter) 2 pod filters You also need to do an AIS block off. Here again selfmade is the key. You onliy need 2 aluminium or brass plates, cut them in shape of the gasket and your done. There are some good videos from "RSW Bryan" about that.