Built-Up Roofing Systems

[@johnlieb1]

why is there a vapor retarder on the metal deck if your driving fasteners through the vapor retarder.

[@TheGolfster3]

Essentially they are just building a wall of defense against water intrusion. The MVP over the substrate serves an additional line of defense. Not to mention they have to secure the ISO in place through some fastening method. What would you do?

[@MageMager-mm9ie]

What type of boots we'll need for a project of the required standard, subject to monitor the influence sustained. Required boot, required sole, what material is the required standandard for applying pressure from the asphalt to membrane, how to seek light and steady before mourning

[@MageMager-mm9ie]

So what would be a light as tile shoes are non rubber but the reflection of the heat will it withstand the economics of your layout presented in your presentation

[@MageMager-mm9ie]

I noticed you required a hack saw for cutting ISO board won't a straight edge or non hook blade but the ISO board, is that of all insulations, or are some stronger than drywall. Wouldn't you do the same damage to the ISO as to the majors saw saw. Am I to believe I'm cutting wood. Non compliant complexities. Why me

[@simon-gr7ju]

Do you have any similar training coming up?

[@MageMager-mm9ie]

What material should be avoided for walking on roof built ups

[@JohnDoe-qb6hx]

This is an art for sure, these guys are true craftsman.

[@garcianicholas88]

If only they could just peel tape right

[@wellbeinglife6037]

Wow!! Wonderful!! Good video!! Thanks for sharing. See you again.♥♥

[@maxsteel6092]

Did not start in the drain, Dry moped, Voids in the asphalt, Did not wipe in the cants with hand, Foot roofed it, Walked on the felts, Walking on any sheet displaces the asphalt......Demonstrations are tough no excuse for being poor

[@Ermagawd]

Well said

[@rosieg6989]

Who's here because Mr Colpitts made a quiz out of it?

[@gferreira94]

🤣

[@giovannerocha8243]

Do you have the answers? LOL

[@BusinessEtiquettes]

That last system is made by Tremco. I have used it before on several roofs. Nice system but expensive

[@gearhead4526]

I used to do a lot of the tremco elastomeric hot system, that modified hot would tear the soles off your work boots, it was good shit!

[@pechoja]

He did not put tar to the end of the strip around 48:11. Left no tar the last foot of the end. Leaks into there. Make sure they have an eye exam so they can see what they are doing. And are wearing their prescription glasses.

[@الفيصل05]

What is the name of the company. I want to work with it. I have great experience in this field

[@natewilliams7025]

😆 🤣 😂

[@reza_dc2]

come to southern california , I can find you a company. I am an inspector for these types of roof systems.

[@HalLee-h1r]

Every ply should be flopped in up the cant not set in that is against all industry standards. Terrible procedures as a 25 yr inspector I would not allow.

[@dakotahwieczorek4748]

That is not a roofer mopping that felt down. That is one piss poor example of hot roofing right there. Looks like a guy that was told what to do after he got the job after McDonalds.

[@sampson4672]

Great video

[@gusanoforever3742]

I need that mopper to mope my house and stay away from the roof, another thing they were supposed to start from the drain

[@Ermagawd]

Good information along the way but we all know it’s much more than 25 lbs of asphalt and especially cold process per 100 sq ft.

[@jonnydanger7181]

Is this a joke? Go climb a ladder on a real roof outside with the conditions and see how it’s really done. And what you trying to do impair everyone’s breathing with indoor hot tar??

[@jasondockery704]

seems really dangerous to workers, that stuff is super hot, cotton gloves?

[@mikepetrilli4686]

Just had Hy Grade Roofing install a metal roof at my house. Worst decision I could have made. They promised to install the roof in 4-6 weeks, of course they were late. When they finally showed up without the proper equipment and damaged my property. They are really proud of the “Quality Audit” that they do, but of course they won’t give you a copy of the audit…lol BTW -the “Quality Audit” they did at my house consisted of 2 guys coming over to pickup the leftover junk they left at my house for a month. They never even went up on the roof! Save your money use someone else!

[@2brazy4ubitch]

How on earth is that relevant to a technical demo on built up roofing?

[@b.r2180]

@@2brazy4ubitch he's just venting. You'd be mad too 🤷

[@adamnewman1050]

Knit Gloves rolling felt... Danger Will Robinson!

[@AlanHanson-p8r]

Roof doctor must have trained them up

[@eddiespagetti8395]

Tar too cold and mop man must be rookie. No flow ahead of roll.whwn he rolls out rolls. Tar must be deep enough to see a flow in front while it rolls out . Mop man barely out down any tar ,this is a crap roof systym in first place . I used to do polyester polymax 3 ply and coat in tar and later paint with aluminum paint. Great 50 year roof. I see my jobs from 30 years ago we did and roofs are doing great still.

[@bigghuncho6181]

Well he can’t mop, roll man using a straight blade, and the mo man gotta help roll the paper??

[@iamstevestrough8185]

I always use a straight blade for the felt hook blade for the walls and rubber proper

[@bigghuncho6181]

@@iamstevestrough8185 I always keep a sharp hook knife. You can you a straight blade. I was taught to use a hook. I do not want to be that guy that cuts through the roof. If we had a loud mouth rookie, we would tell him cut some walls. Give him the measurement. And go to the other side of the roof☺️(99% of the time they will use a staight blade). Wait about 10 min. You’ll hear “STOP,STOP,STOP WTF ARE YOU DOOOOING!”🤣🤣🤣🤣🤣🤣

[@clarkroofingco.3317]

Theirs a lot to say about this tutorial.. keeping it short: I for one believe the speaker/instructor has technical knowledge however his roofers, where they may have been doing what was asked.. however they displaded poor workmanship...

[@mrgrumpy15031]

Get a real mopper in there. That guy needs to stick to mopping kitchens

[@aaronlee6813]

Thats not a mop , 6 to 8 skins to get enough asphalt out there before you rolling cold !!!

[@martingarcia3773]

yo les puedo ensenar como aserlo de mejor manera no deven de pisar en el papel para nada pueden pasar el sepillo para mejorar que se pege mejor pero no pisar denme trabajo y buen pago y me boy de inspector

[@josevelazque5531]

Martín García y empezaron mal tienen que empezar en el drenaje por la caída del agua

[@richarddvddy9180]

@@josevelazque5531 en lo ke yo estaba pensando

[@acumencontractingllc4160]

I see my favorite shingle company in the back! IKO!!!

[@BUSTRCHERRI]

You see half of north America's shingling distributer in the back.

[@MrFlatroofer]

And mine. Used at least a thousand or more rolls.

[@wadecrosweller8314]

I use the hot asphalt or bitumen as we call it in England 🇬🇧 🏴󠁧󠁢󠁥󠁮󠁧󠁿 asphalt to us is a different product to this… even so we do the system so different and have done for many years. Keep that fella off the mop and stick him back on the pot for a while 😂 we would laugh them boys off site….

[@RooferReflections]

I appreciate the demonstration, but we need to move to more sustainable methods.

[@johnfelix1494]

So many voids wtf

[@salvadormartinez7185]

I'll teach that mop guy how to really swing a mop

[@jrluis2201]

Salvador Martinez I don’t think it would be a good idea to crazy swing a mop with the danger of splashing a multi millionaire in the back

[@1980DEVILSREJECTS]

@@jrluis2201 you ain't splashing nobody what he's saying is you pump mop in buggy 4 or 5 times to soak up as much asphalt as you can doing that mop runs smooth on surface no scrubbing like this guy is doing and you wanna put heavy asphalt where he's gonna lay role so he can adjust easier once you lay role on roof the roles way 50lbs plus a role so you gotta put enough for him to maneuver role

[@wadecrosweller8314]

Love that! Absolutely class 😂😂

[@iamstevestrough8185]

My man has a lot to learn if she's a if he's really a mop man I can't see him being on a job mopping he would get thrown right off the roof no rap

[@danielcarr6930]

Need to get A Experience Mop man ? Been mopping 🔥 for 35 years come on guys look at all the hot in front of his bucket ? Talk about 25 lbs just saying not a hater and need to sprinkle mop the high density board to the Iso ???? Luv u All !

[@garrett3113]

Now i want to do hot again lol but my lady said i stink when i come home lol

[@puprilla]

Hot tar roofing is for lops i do custom metal and custom shingles

[@BUSTRCHERRI]

Oh...you do girls roofing. How nice for you mam.

[@الفيصل05]

ما اسم الشركة انا اريد العمل معها

[@puprilla]

@@BUSTRCHERRI lmfao 👌 i can do any type but since i like to make money metal is were its at. If u didnt know well that shows

[@puprilla]

@@الفيصل05 what?

[@الفيصل05]

What is the name of the company. I want to work with it. I have great experience in this field

[@iamstevestrough8185]

I roof in Philly commercial roofing we do a hot base a 3 ply and then a hot down granulated white rubber on top cap sheet 50-year roof and that's on all government work in Philly

[@AlanHanson-p8r]

Looks like kids are playing at it

[@davidlinaldi5156]

Les falta muchísimo

[@georgeboylson9559]

Jake leg roofers

[@1980DEVILSREJECTS]

Thermastic is the stickiest shit on market today

[@iamstevestrough8185]

These guys are probably the roof inspectors who know everything about the roof on paper but definitely do not know how to install it they know how it should be done they just don't know how to do it or do it efficiently these guys are terrible and quite honestly if they are inspectors they're not very good you always always start in the drain I don't care how many cap sheets you put on it you always start in the drain

[@tompipps3383]

TOM PIPPS FOAM- BATON ROUGE LOUISIANA USA HI HELLO &

[@gustlogothetis3145]

Foot roofing

[@BUSTRCHERRI]

Lol

[@ecohplus1460]

Dangerous!!

[@BUSTRCHERRI]

Only if yoyre an idiot.

[@denyspetika7396]

bad system, just waisting money

[@maxsteel6092]

OH learn how to mop

[@786otto]

F that!

[@BUSTRCHERRI]

There's not a chance in hell you'd be doing this roped off. No hard hats. No shirts in the summer. No fire extinguishers(it's not two ply modified) if there's a fire it at at the kettle lids. No safety glasses blah blah. Ypure teaching shit that's not needed for a system no one uses anymore.

[@TheGolfster3]

Don't tell me...TPO?