Bull Bar™ by Crescent® - How To Dismantle Decks and Pallets

[@42lookc]

The built in nail puller and the indexing head sold me.

[@straightfromthehorse]

I researched pallet dismantling tools and bought this. It is the easiest tool to use to remove pallet boards. On regular pallets using 2x4s, there is nothing that can compare to this. The ability to change the angle of the tool to the handle is great. However, I got a batch of pallets with 4x4s for the outside rails and the 'u' shaped part of the tool was just a little too narrow to straddle the 4x4s. We were finally able to use one edge of the tool to wedge the top boards off, but it was more effort. The only thing I could recommend to the manufacturer in the future would be to widen the gap between the two fork tines to allow for removal of boards off 4x4s. Great product! It will really save you time and physical effort in breaking down pallets.

[@ApexToolGroupLLC]

+straightfromthehorse Thanks for the feedback and great comments.

[@robhayes5320]

works good!! its nice that you can adjust the angle in different situations for pulling deck boards.

[@halcyon1030]

This tool is a beast.

[@abmac58]

Its this available in the UK or on eBay thanks

[@t.mckinney3621]

a real back saver, awesome tool

[@domingosjose80]

Ferramenta segura e prática. Só não sei se o preço é acessível.

[@filfa8420]

Wow this is the one of the most popular product video,impressive

[@ammanasuh4946]

It's so powerful !!! where can I buy one of this? I am in Australia.

[@Monstah7]

kinda hard to argue with its efficiency.. Daaamn..

[@axxman]

It helps! Let's broaden this discussion.

[@carriemello489]

Will this tool remove boards with screws?

[@rgaud8]

Damn I wish I had this when I was tearing my deck down.

[@45bossdog]

Where can I get one and how much are they

[@ApexToolGroupLLC]

Sylvester - We hope this link will help you out. Available at Home Depot for $79.97. thd.co/1HSS23Y

[@axxman]

How's about a Nail Jack or Nail Hunter?

[@CharisWilliams]

Nice!

[@lesliewilliams3676]

How much are these to buy please

[@ApexToolGroupLLC]

Leslie - We hope this link will help you out. Available at Home Depot for $79.97. thd.co/1HSS23Y

[@jacksparrow2686]

Apex Tool Group en home depot méxico la venden???

[@tampabaydan3422]

What about screw down decks?

[@kimgreen4840]

I like it alot (Jim Carey accent)! Any warranty on this?

[@texomatex1]

lifetime

[@greasemonkeypol]

weight?

[@ApexToolGroupLLC]

+greasemonkeypol This item weighs 9-1/4lbs. www.crescenttool.com/crescent-dkb44x-bull-bar-44-indexing-decking-removal-tool.html

[@bugmandu1]

$79.97 at Home Depot

[@RubinGnoni]

It's the best tool I found to take apart a wood pallet, but isn't $281.00 a little too steep for it?

[@ApexToolGroupLLC]

+Rubens Onofrio We hope this link will help you out. Available at Home Depot for $79.97. thd.co/1HSS23Y

[@RubinGnoni]

Apex Tool Group Sold! Thank you, very much.

[@ScoutCrafter]

Hey Rubens- I just got mine yesterday from the Home Depot online for $79-! Awesome tool! Hope that helps. 👍

[@RubinGnoni]

ScoutCrafter Thank you Scout. It certainly helped. I already ordered mine too.

[@gijoe9859]

+ScoutCrafter What is it called?

[@axxman]

My friend invented the Extractor, but my Nail Jack and Nail Hunter actually deal with nails that are flush or imbedded! That's the big difference Let's TALK!

[@axxman]

then you can get the nails out!

[@ApexToolGroupLLC]

+axxman You can use the nail puller on the Bull Bar if you like or we have a tool that is perfect for getting nails, staples, etc. out as well. www.crescenttool.com/crescent-np11-11-nail-puller-pliers.html Hope that helps.

[@morganroberts1111]

ripper tool...